Odin's innovations M12 sidewinder vs WOsport fake speed loader.

In this video I show the differences between the real sidewinder vs the fake sidewinder.
I was not paid by anyone to promote anything. These were both bought with my own money and I just wanted to share my experience and opinion so that people don't waste their money on fake stuff.

[@afkafkafk]

Thanks for this, I bought a fake one and it looks like they actually improved the internals a bit the the washer below the nut has a stamped ridge like a crush washer, and the large metal washer has stamped grooves in it as well for more friction with the clutch felt.
However looking at this video mine wasn't even put together in the right order, the felt was at the bottom of the assembly instead of the large washer.
The oring on mine was already stretched out and needed to be replaced, I also used a keyboard o ring.
The bolt attached to wheel needed to be dremeled a slot so I could actually break the nut and loosen the whole thing to take it apart.
Total crap but Amazon gave me my money and let me keep it

[@zetreco1]

I bought this fake to use in my 250th PTM magazine ... and it was already a problem, this fake can't take all 250 bbs and damaged all the teeth of the inner wheel, it gave wear.
Do I find only that inner wheel to buy ?!
Thanks for the video.

[@Evo_Spec]

You can find good parts by Googling, "Odin Innovations M12 Parts Rebuild Kit" then you can get better internals.

[@jm206206]

Most important thing is the fake one uses cheap plastic in the one part that takes the most stress, the teeth on the feeding wheel. Those teeth will strip if used and over torqued enough times. Then you'll be buying a second one for another $25, that will probably break the same way. At that point, the cost will be the same as if just buying the Odin for $50 to begin with, except the Odin will still be working.

[@darkshock42mlg05]

There's actually a lot of rebrands of the fake one like on Taiwan gun I saw it's under the name of the black dragon and I almost got it until I realized that it was a knockoff. Good thing I actually took the time to read what the product was. I then went to Eva and just bought the original and the ak adapter because I need it for ak mags as well.

[@_hi_pwr]

Pretty Informative, thanks for making this video!

[@johnimperial9777]

Does the odin get white dirt also like on the fake one

[@Evo_Spec]

Yeah, unless you clean your BB's, it's not really preventable.

[@johnimperial9777]

@@Evo_Spec does it affect accuracy when it beed loaded on mgazine?

[@joaocoelho9582]

Can i buy the rebuild kit from odin and replace everything in the fake one?

[@richardstrage3682]

great video!

[@hmg9194]

Thanks, bought a fake one from my field assuming it was the real deal

[@rolandbioc3024]

can you put a crush washer on the fake one?

[@Evo_Spec]

That's one of the reasons I filmed this was to suggest people with fake ones to put a crush washer into theirs. Or buy the original lol

[@rolandbioc3024]

@@Evo_Spec will it help me load my epm1 mags significantly to full load of 250?

[@Slicks_16]

I bought this fake back in september and then the handle broke so i actually bought the real rebuild kit and upon taking it apart i noticed some of the things on the wheel had fallen off so i replaced it with the rebuild kit and now it only loads 50-60 rounds in my 190 round midcaps so off to go buy the real one i guess lol

[@ninersix2790]

Practice before you make a video. If it is your first time make a story board first of what you are going to do and say. This was WAY too long and to often your hands and arms were in the way of the viewer.

[@LuciTulcea]

Give the man a brake will ya'? The video is very nice!