The best thing and also one of the most secret things about TBS, they have rates for how long you can power up their products without antennas. It’s like insane amount of time. So don’t think you burnt it out if you make that mistake. :) Just one of the many reasons I love them so much.
first thing first your content absolutely clear enough & show every step which i totally understand till the end. after watching few videos i personally think you the one who give complete guide. you deserved my subs 💯 I got 1 question brother. have you try this setup ( TBS Crossfire Micro Tx + Diamond antena ) fly for few kilometres away??
This is a great video on explaining things. But my receiver just has a solid green light and will not flash when I push the button on it. My lua scripts in my radio also don't do anything. It says they're there, but clicking on them acts just like I'm not clicking on them.
Hey Gal, great video and description. I have a quick question, I have the Tbs crossfire Micro TX installed on my Taranis x9d plus for my freestyle quad. But I’m buying the iflight MegaBee that comes with a Tbs crossfire nano receiver, the MegaBee is a bind and fly quad. Do I still have to update the Taranis, Tbs Micro and MegaBee to the latest versions? Or can I just bind and fly?
Mr Gal .. I know that the crossfire will give long range but the question is .. what about the goggles? does it give me the same range? with a clear video? or should i use special items for the goggles? ... by the way my goggles (Fatshark Attitude v5) ... thank yoooou my friend
Quick question, I'm not using the small reciver that you used in the video that came with the crossfire, I'm using the micro reciever v2 for the crossfire, how do I bind it, and where does it soldier to?
You can it to any aux channel but actually as fars as I heard on latest BF version you don't need to use an aux channel at all. I have to check it out.
Great video but i have a question can many quads with crossfire be bound to one model number?? Because everytime a new receiver is bound to the crossfire we still need to do setup with the unit.
Very good video! Thanks a lot! As I heard there is a Update firmware for the MicroTX that enables 500mw output - do I need to update my receivers as well when I update my TX?
Question. I updated to latest firmware on Micro TX and Nano RX and could not bind via LUA in the Tarranis. I bound the RX by pressing button on Micro TX. The bind was successful, it appears to have updated, and I have flown it. The Nano RX is not appearing on the CRSF LUA. I am running OpenTX 2.2.4 and Bootloader 2.2.4. This was the case on two different models. Do you have any suggestions? Thank you for your videos and information.
If you own an OpenTX radio, Crossfire LUA should be in the files folder of your transmitter. Ive X9D+ SE 2019 and Jumper T18 and they're both in the transmitters file folder. Best ✌🏼
I am a old programmer. Not in these fields but in machine language and then databases and .Net invierment. One of the first thing we learned in our time was to make things as easy as possible for the Customer. There are two possobilities. One duming down people has really worked. Because these programmers has to just make it easy for people to bind, set up their drone( which most of it could be done just by knowing which drone and set up for that specefic drone!!) and two they really do not know what does it means to be kind, and because of polotics and Greed these days we have all these problems that miljons of people can not do a simple job. Binding and go out and fly!!!? it really is a shame
Your flight controller looks like a HobbyWing XRotor F4. You've used RX3 & TX3 to connect your Crossfire, have you experienced any problems doing this? Some other users have had to use RX6 & TX6 to get the Crossfire to work properly, using RX3 & TX3 they say caused fail-safes?
Hi Kremmer, on 7:02 on your video, pointing the nano rx, you said that ground is the first on the left, but actually ground is the SQUARE one which is located on the right side. So the order is incorrect. I just followed your video and it did not turn on, and started to get very hot. I double check on TBS manual and it was backwards. Fortunately i change the cables possition and now it turns on. Hope nothing is damage. Could you check that? Thanks and great video
Hi buddy. Please pay attention that they changed the layout. Look for "Versions" inside the user manual and you will be able to see the layout of my old receiver and the new one - which is the one you've got.
Hi do you if both nano and micro can use same fw ? I just installed a nano and had to use fw 2.25 now my micro rx on another build is now not paired and i cant seem to update the fw to the same as the nano.. any ideas ??
GREAT video Gal!!! You’re always so thorough, and that’s what sets you above many of the other RUclipsrs! Thanks buddy for all your help and hard work! Much appreciated. Best ✌🏼
@@KremerFPV Okay nice thank you :D But finally I solved the problem... I connected the TX V2 with the PC and went into bindmode on the PC and then it worked without any problems, that is very strange but I am happy that its working now ;D
Hello !prompt please here at me on Crossfire GPS data from the menu of Taranis does not appear I choose detection of new sensors it about nine finds but among them there is no GPS data. but also for some reason telemetry in lua script inav on the remote also does not go though 3D fixation eventually occurs but for some reason the data from the controller flight most likely do not reach the remote in General I do not know what the problem is. you can tell on Crossfire behind on the remote control should be the last menu item displayed GPS data here I do not have them. in the configuration settings of the flight controller, inav has checked the data telemetry feed.What can be done .Where to find the answer that can suggest the ?!prior to that, the lua Script was working fine through the port F which was flying Nicky. Thanks in advance !
Very Nice video. But i need to update my taranis.. i have LBT version so can i upgrade the same like you without getting the inter version? Otherwise my quads wont bind any more.. does this have something to do with that or am i safe? Please help
Because I am not really sure, I suggest that you should email frsky support: sales4tech@gmail.com They respond pretty fast and will give you the most accurate answer. Please keep me posted when you have th answer.
Gal Kremer yes it did work without losing your LBT or Non LBT firmware so that is a relief. But i got another problem.. i did flashed the firmware and now when i go to longpr3ss menu and then version it says "version 2.2.1" wich is good. But when i go to bootloader mode i still see 1.6 or something... and very old version. I also have problems with going to the model and trying to chose CRSF.. the option isnt there.. please help me
Gal Kremer i dont see open tx when i press firmware. I did copy the file to USB device G: Thats what is says on my pc.. is there any way contact each other faster if you have some time tomorrow.... rude question sorry
Gal Kremer well my model is on crossfire and the light is showing Orange and when i press it its getting green. But the i only see when i press firmware something like this [...] and read me wich says you can put files in here
Im swapping my r9m system to crossfire micro but i have a Qx7. If i mod my Qx7 to accept a lower baudrate using the small pcb, will i still be able to use my 2.4ghz to fly my xm+ quads?
When I try to execute the LUA script on my X9D+(latest version of opentx + 2.2.1 bootloader) it doesnt find the Crossfire TX in the module bay and just shows "waiting for crossfire devices...". The light on the XF module is pulsing orange/yellowish so there should be a proper connection to the Taranis. Couldnt find anything online that solves my problem yet..
Did you update the Crossfire TX? Also - make sure that all the pins are properly connected. It might power up without being properly connected to your Taranis.
So am i deleting all the files in the No name directory then copying and pasting the new downloaded contents into the directory? I keep getting Warding SD card expected version 2.3.15 (which is the latest version
@@KremerFPV I seen they have 2.4.1, I guess it helps with slow lua, script, have you updated your crossfire yet, I haven't yet just waiting on some reviews on it.
hey man, ive pretty much done all these things .. and i still get the message when trying to run the crossfire.lua script "waiting for crossfire devices" .. do you have any idea how i can fix this ? i'd be most grateful for any advice ! cheers..
@@KremerFPV I think that you are probably losing a lot of possible subscribers as i think... like me... I gave up... because i found it difficult to follow your otherwise excellent tutorial. No offence meant or intended.. as like i said you certainly know your subject and many of us newbies would benefit from your videos. Regards. Mick.
Cool review. I have a similar setup but with one annoying issue. When I arm my quad, telemetry stops working. Any idea what might be wrong? Video for reference: ruclips.net/video/0t1QcLj2VzU/видео.html
You need to do a mod in order to get the telemetry data working properly. I don't have the Q X7 so I recommend searching for "Crossfire Q X7 mod" in order to see how it's done.
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
► Please Consider Supporting Me On Patreon: www.patreon.com/GalKremer
I swear I watched like 10 guides before this one and none of them fully walked through this! Thanks so much!!
My pleasure Joshua!
This was one of the clearest and easily explained videos for setting up CF! Made my life super easy.
The best thing and also one of the most secret things about TBS, they have rates for how long you can power up their products without antennas. It’s like insane amount of time. So don’t think you burnt it out if you make that mistake. :) Just one of the many reasons I love them so much.
You made it very easy to understand! Thank you!
My pleasure Ryan. Enjoy your Crossfire!
This video helped me set up my tbs tracer. Its pretty much the same process
That's great!
first thing first your content absolutely clear enough & show every step which i totally understand till the end. after watching few videos i personally think you the one who give complete guide. you deserved my subs 💯
I got 1 question brother. have you try this setup ( TBS Crossfire Micro Tx + Diamond antena ) fly for few kilometres away??
I am glad I could help you out.
You should be able to go for miles using this setup. My record is only 3 Kilometres (VTX limitation, not RX).
Gal Kremer thank you so much brother 💯🙏🏻
Thank you so much. Concise, easy to understand, and informative.
Thanks buddy!
There is a selection when buying crossfire micro 915mhz and 865 MHz which one i need to choose btw thanks for the video very helpfull
It's the same product - you select the frequency using your radio controller / TBS Agent X and it depends on your country.
This is a great video on explaining things. But my receiver just has a solid green light and will not flash when I push the button on it. My lua scripts in my radio also don't do anything. It says they're there, but clicking on them acts just like I'm not clicking on them.
Thanks. Did you get it sorted?
@@KremerFPV Yeah. It's a bad receiver and TBS is sending me a new one from Hong Kong.
Cool remote and great post!!! Info is always needed!
thanks bud. you're always a good reference source.
Thanks for watching my videos :-)
Sorry for asking, but should we NEVER EVER turn on the TX without the Antenna? By that mean also by plugging in the USB port on the CF TX?
USB is fine.
Hey Gal, great video and description. I have a quick question, I have the Tbs crossfire Micro TX installed on my Taranis x9d plus for my freestyle quad. But I’m buying the iflight MegaBee that comes with a Tbs crossfire nano receiver, the MegaBee is a bind and fly quad. Do I still have to update the Taranis, Tbs Micro and MegaBee to the latest versions? Or can I just bind and fly?
After binding the RX it will be updated if needed. I don't think that you'll need to update your TX or the module.
Great video very informative!!
.
Thanks!
Mr Gal .. I know that the crossfire will give long range but the question is .. what about the goggles? does it give me the same range? with a clear video? or should i use special items for the goggles? ... by the way my goggles (Fatshark Attitude v5) ... thank yoooou my friend
Hi there. Well it depends on your FPV system (VTX and VRX).
Quick question, I'm not using the small reciver that you used in the video that came with the crossfire, I'm using the micro reciever v2 for the crossfire, how do I bind it, and where does it soldier to?
Binding is identical. I am away and I don't have this RX next to me, so try to look it up in the user manual.
Fantastic. Bardwell needs to take a lesson on how to make comprehensive and to the point youtube video.
Thanks pal, I appreciate your compliment. I do think though that JB has a different style of videos, full of comprehensive information.
Hi Gal, great video. Just wondering if this would be exactly the same if i was to do it on a Taranis Qx7?
Thanks. It will be similar, but you have to do a small mod in order to get it to work properly.
Very informative and straightforward Video!
Thanks Carmine!
To get RSSI in osd ,do I need to set RSSI channel to aux 8 in config tab ?
You can it to any aux channel but actually as fars as I heard on latest BF version you don't need to use an aux channel at all. I have to check it out.
Great video but i have a question can many quads with crossfire be bound to one model number?? Because everytime a new receiver is bound to the crossfire we still need to do setup with the unit.
Thanks you. AFAIK - the answer is yes. I will be able to confirm it only next week though.
Sweet. Cheers buddy excellent description, very helpful. Respect.
My pleasure buddy
What benefits are there to updating the FRSKY firmware?
which frequency should we use 868 or 915?
Very nice review :) Someday I'll get something like this. Hopefully, other options become available also.
Thanks buddy. You should definitely give it a try. I don't think that there is a reliable long range solution at a similar price currently.
Very good video! Thanks a lot! As I heard there is a Update firmware for the MicroTX that enables 500mw output - do I need to update my receivers as well when I update my TX?
No, just the tx.
Hi Sir, whats the voltage range of the crossfire nano rx? Can I put solder the 5v rx wire to a battery positive on my mobula6 board?
Only 5v as far as I know.
Question. I updated to latest firmware on Micro TX and Nano RX and could not bind via LUA in the Tarranis. I bound the RX by pressing button on Micro TX. The bind was successful, it appears to have updated, and I have flown it. The Nano RX is not appearing on the CRSF LUA. I am running OpenTX 2.2.4 and Bootloader 2.2.4. This was the case on two different models. Do you have any suggestions? Thank you for your videos and information.
My pleasure buddy. That's a strange issue.
Do you have another receiver to test it with?
@@KremerFPV I updated to the latest OpenTx and it fixed the issue.
@@bkudell Great!
Uh, where did he get the crossfire.lua from? What did I miss?
If you own an OpenTX radio, Crossfire LUA should be in the files folder of your transmitter.
Ive X9D+ SE 2019 and Jumper T18 and they're both in the transmitters file folder.
Best ✌🏼
Good Job, Step by Step....Thank you Bro
My pleasure buddy
Thank you, very helpful
I am a old programmer. Not in these fields but in machine language and then databases and .Net invierment. One of the first thing we learned in our time was to make things as easy as possible for the Customer. There are two possobilities. One duming down people has really worked. Because these programmers has to just make it easy for people to bind, set up their drone( which most of it could be done just by knowing which drone and set up for that specefic drone!!) and two they really do not know what does it means to be kind, and because of polotics and Greed these days we have all these problems that miljons of people can not do a simple job. Binding and go out and fly!!!? it really is a shame
Thank you Gal! I hope this will work as easy as you described it, waiting for my Xfire to arrive! ;)
Subbed :)
I'm sure it will. Let me know if you have any issues. Enjoy your new RC!
Your flight controller looks like a HobbyWing XRotor F4. You've used RX3 & TX3 to connect your Crossfire, have you experienced any problems doing this? Some other users have had to use RX6 & TX6 to get the Crossfire to work properly, using RX3 & TX3 they say caused fail-safes?
I only used it on the bench. I didn't use this flight controller on a build eventually, as this stack does not support 6s.
Yes it was useful thanks for sharing
You're welcome.
Hi Kremmer, on 7:02 on your video, pointing the nano rx, you said that ground is the first on the left, but actually ground is the SQUARE one which is located on the right side. So the order is incorrect. I just followed your video and it did not turn on, and started to get very hot. I double check on TBS manual and it was backwards. Fortunately i change the cables possition and now it turns on. Hope nothing is damage.
Could you check that?
Thanks and great video
Here the manual where i found that it was backwards. www.team-blacksheep.com/tbs-crossfire-nano-quickstart.pdf
Hi buddy. Please pay attention that they changed the layout. Look for "Versions" inside the user manual and you will be able to see the layout of my old receiver and the new one - which is the one you've got.
It is kind of crazy that channel 2 is a square that is normally gnd on the old version.
They fixed this issue in the new RX version.
Would this work the same way on the newer 2019 radios?
Yep.
Hi do you if both nano and micro can use same fw ? I just installed a nano and had to use fw 2.25 now my micro rx on another build is now not paired and i cant seem to update the fw to the same as the nano.. any ideas ??
Hi, I am not sure. Open a ticket on TBS. I'm sure they can help.
Great job bro.
I need to buy this.
Is there any way to bind the taranis to the Nano RX without the Crossfire Micro TX?
No
GREAT video Gal!!!
You’re always so thorough, and that’s what sets you above many of the other RUclipsrs!
Thanks buddy for all your help and hard work! Much appreciated.
Best ✌🏼
Thanks you very much, I appreciate it!
Micro TX V2 review is coming up soon ;-)
@@KremerFPV great and looking forward to it, as I have that coming to me as well for my backup radio Jumper T18.
Best ✌🏼
Hi Gal, can you make a video using jumper t16 radio. Thanks
Thanks for the suggestion, I will consider it.
thanks so much!
Thanks heaps, great guide.
Your'e welcome buddy!
My new Crossfire Micro Tx V2 wont bind with the reciever :( please help me
I did all like you showed...
I am making a new video soon, hopefully it will help you out.
@@KremerFPV Okay nice thank you :D But finally I solved the problem... I connected the TX V2 with the PC and went into bindmode on the PC and then it worked without any problems, that is very strange but I am happy that its working now ;D
Fantastic thank you
My pleasure Stuart, I'm glad I could help you out.
Hello !prompt please here at me on Crossfire GPS data from the menu of Taranis does not appear I choose detection of new sensors it about nine finds but among them there is no GPS data. but also for some reason telemetry in lua script inav on the remote also does not go though 3D fixation eventually occurs but for some reason the data from the controller flight most likely do not reach the remote in General I do not know what the problem is. you can tell on Crossfire behind on the remote control should be the last menu item displayed GPS data here I do not have them. in the configuration settings of the flight controller, inav has checked the data telemetry feed.What can be done .Where to find the answer that can suggest the ?!prior to that, the lua Script was working fine through the port F which was flying Nicky. Thanks in advance !
Thank you!
You're welcome :-)
Do these need tuning like the 2.4ghz system?
No.
Very Nice video. But i need to update my taranis.. i have LBT version so can i upgrade the same like you without getting the inter version? Otherwise my quads wont bind any more.. does this have something to do with that or am i safe? Please help
Because I am not really sure, I suggest that you should email frsky support: sales4tech@gmail.com
They respond pretty fast and will give you the most accurate answer. Please keep me posted when you have th answer.
Gal Kremer yes it did work without losing your LBT or Non LBT firmware so that is a relief. But i got another problem.. i did flashed the firmware and now when i go to longpr3ss menu and then version it says "version 2.2.1" wich is good. But when i go to bootloader mode i still see 1.6 or something... and very old version. I also have problems with going to the model and trying to chose CRSF.. the option isnt there.. please help me
You need to update the bootloader as well. Please see 3:00
Gal Kremer i dont see open tx when i press firmware. I did copy the file to USB device G: Thats what is says on my pc.. is there any way contact each other faster if you have some time tomorrow.... rude question sorry
Gal Kremer well my model is on crossfire and the light is showing Orange and when i press it its getting green. But the i only see when i press firmware something like this [...] and read me wich says you can put files in here
Great Show bruh but that is not the reciever I got with mine I got a tiny chip with no antenna connector no button just soldier tabs
Thanks. It's probably not a receiver then...
True no way for it to recieve
Im swapping my r9m system to crossfire micro but i have a Qx7. If i mod my Qx7 to accept a lower baudrate using the small pcb, will i still be able to use my 2.4ghz to fly my xm+ quads?
Yes
How if i used falcox system not beta flight ? Possible running ??
Yes, it should work.
Hello
Will I have problems if I install x9d without updating this tbs module
It's better to update both units to the latest available version in order to avoid issues.
@@KremerFPV thank you so much.I follow your videos with pleasure 👍
When I try to execute the LUA script on my X9D+(latest version of opentx + 2.2.1 bootloader) it doesnt find the Crossfire TX in the module bay and just shows "waiting for crossfire devices...".
The light on the XF module is pulsing orange/yellowish so there should be a proper connection to the Taranis.
Couldnt find anything online that solves my problem yet..
Did you update the Crossfire TX?
Also - make sure that all the pins are properly connected. It might power up without being properly connected to your Taranis.
nice and short !
So am i deleting all the files in the No name directory then copying and pasting the new downloaded contents into the directory? I keep getting Warding SD card expected version 2.3.15 (which is the latest version
Sorry for the late response. Do you still need help with this issue?
@@KremerFPV got it to work but lost the ability to use the radio for sims. Got a tbs tango 2 now and problem free lol. Thanks tho
@@NsXy Enjoy it!
Have you tried the new 2.4 firmware update for 250mw.
Not yet, but I plan to upgrade it soon.
@@KremerFPV nice maybe make a review on it.
@@KremerFPV I seen they have 2.4.1, I guess it helps with slow lua, script, have you updated your crossfire yet, I haven't yet just waiting on some reviews on it.
hey man, ive pretty much done all these things .. and i still get the message when trying to run the crossfire.lua script "waiting for crossfire devices" .. do you have any idea how i can fix this ? i'd be most grateful for any advice ! cheers..
Does the module power up?
I'm having the same problem and I see that my module does not power up, however I was able to update it on the PC.
Problem solved here ruclips.net/video/xd5lO7SqGrs/видео.html
I had a similar issue. Make sure that the pins in the module bay are property aligned when inserting the TX module.
Tip if nothing works. Download agent x, update TX. Replug, Start agent x, klick on bind, update rx. Fly
Thanks!
THX BRO~!
You're welcome :-)
did you say 40km?!?
Yep
In your dreams man...No way 40km..
it was tested.... by tbs.
You know your stuff... But you need to slow down a little for those of us that don't.. and are trying to follow your.. "how to"
Thanks Michael. I have slowed down my speech and improved the quality of my videos since posting this review (IMHO).
@@KremerFPV I think that you are probably losing a lot of possible subscribers as i think... like me... I gave up... because i found it difficult to follow your otherwise excellent tutorial.
No offence meant or intended.. as like i said you certainly know your subject and many of us newbies would benefit from your videos.
Regards. Mick.
No offense taken bud. I know that I speak too fast and have been working on this subject since posting up this tutorial.
Cool review. I have a similar setup but with one annoying issue. When I arm my quad, telemetry stops working. Any idea what might be wrong? Video for reference: ruclips.net/video/0t1QcLj2VzU/видео.html
just a tip....slow down. remember, some of are new and have no idea what we are doing yet.
Thanks Todd. I totally agree and I've put a lot of efforts into improving my videos since this one.
Diamond antenna is a Scam
Why do you think so?
Do I use the same parts and process with the QX7?
You need to do a mod in order to get the telemetry data working properly. I don't have the Q X7 so I recommend searching for "Crossfire Q X7 mod" in order to see how it's done.