Recently discovered you guys through searching yz 125 builds, as I have a yz 125 2001 that I’m currently resto factory modding from the ground up. Great content can’t wait to see more.
Hey Joey! Thanks for the feedback. We grew appreciate you hanging with us. It’s fixing to get mental. Well it’s always been mental. So I guess more mental 😂. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS
Sorry guys! I had to chime in at 2:30 mins. All the Cr's are not like that Yammi hub. Cr's have a small casting protrusion that guys like me file/Sand off. Yes i can put it in the lathe, but that might get one in trouble if the cast is off center. Great job, Love your channel. I have a "like" new 2002cr250r and several frames and 3 centrifical PV Motors. P.s. dont tell the yammi guys to turn down those massive splines, they will weaken those hubs. 👍🍺
Awesome, fine-tuned information, specific to the CR. Thanks for adding some value to the channel for everyone! What are the odds we had some form of an example right there on the bench? On our YZ hubs- just like you said.. exactly why they are still there on our YZ 125 giveaway bike 😍 Thanks for watching, dude!
Bummer… I don’t do TikTok or the ‘gram…. or any other social media for that matter. Don’t like being data-mined by the ChiComs or that 2nd gen synth, Phuckerberg
The best tag-team in motocross right here 👏 I cannot wait to watch each video !! Running late today as I am getting ready for a few days down in Millville ❤ braaaaaaaap
S7 nozzle 6chy5-79 # yamaha part number Fix for the TMX 01 to 03 Crf 2002 2008 450 coil All the Honda needles are discontinued. If you have the 2005 to 2007 Needle # stock is a 65. To lean. 6chy5-79 work good on both 125 and the 250 in 2001 to 2007 TMX The crf coil is a hotter coil, better power curve and adds 1 to 1.8 HP The 2004 to 2007 TMX carb has more mid and top end. I've try both carbs on same bike.
Love it. I can say I knew most of your “steps” being a long time (40 year) two stroke guy but I always learn something from you two. Keep the video coming and I’ll keep watching. Great chemistry and love the banter. Cheers!
Thank you for the feedback Stefan! It is greatly appreciated. Makes me happy to hear you’ve learned something. That’s the best part. Also, If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS
C&T! You guys are the best so funny and knowledgeable this should be a sick build. I totally wished y’all we’re closer to me to hang out haha keep it twisted bros
@@MXSkillShack oh hell yeah we could yell Bob saget as loud as shit anytime somthing went off the wall! hahah hope all is well with you guys and the families 😉
Recently discovered you guys through searching yz 125 builds, as I have a yz 125 2001 that I’m currently resto factory modding from the ground up. Great content can’t wait to see more.
Hey Joey! Thanks for the feedback. We grew appreciate you hanging with us. It’s fixing to get mental. Well it’s always been mental. So I guess more mental 😂.
If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information.
Tony // MXSS
Sorry guys! I had to chime in at 2:30 mins. All the Cr's are not like that Yammi hub. Cr's have a small casting protrusion that guys like me file/Sand off. Yes i can put it in the lathe, but that might get one in trouble if the cast is off center. Great job, Love your channel. I have a "like" new 2002cr250r and several frames and 3 centrifical PV Motors. P.s. dont tell the yammi guys to turn down those massive splines, they will weaken those hubs. 👍🍺
Awesome, fine-tuned information, specific to the CR. Thanks for adding some value to the channel for everyone!
What are the odds we had some form of an example right there on the bench?
On our YZ hubs- just like you said.. exactly why they are still there on our YZ 125 giveaway bike 😍
Thanks for watching, dude!
Bummer… I don’t do TikTok or the ‘gram…. or any other social media for that matter. Don’t like being data-mined by the ChiComs or that 2nd gen synth, Phuckerberg
Good thing we still have the 03 to build here with you!
The best tag-team in motocross right here 👏 I cannot wait to watch each video !! Running late today as I am getting ready for a few days down in Millville ❤ braaaaaaaap
We appreciate you, Mikey!
Mike, you are the man. Also MN rules! That’s my homeland.
Tony // MXSS
S7 nozzle
6chy5-79 # yamaha part number
Fix for the TMX 01 to 03
Crf 2002 2008 450 coil
All the Honda needles are discontinued.
If you have the 2005 to 2007
Needle # stock is a 65. To lean.
6chy5-79 work good on both
125 and the 250 in 2001 to 2007 TMX
The crf coil is a hotter coil, better power curve and adds 1 to 1.8 HP
The 2004 to 2007 TMX carb has more mid and top end.
I've try both carbs on same bike.
SUPER valuable first hand experience by the sound of the detail. Thanks for sharing!
Tony // MXSS
Love it. I can say I knew most of your “steps” being a long time (40 year) two stroke guy but I always learn something from you two. Keep the video coming and I’ll keep watching.
Great chemistry and love the banter. Cheers!
Thank you for the feedback Stefan! It is greatly appreciated. Makes me happy to hear you’ve learned something. That’s the best part.
Also, If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information.
Tony // MXSS
I could be wrong but I feel like I’ve seen this video on another channel already awhile ago
This one’s fresh! A few of our YZ 125 videos were posted on this channel, and our other channel. (hope you win it!)
First off, no you tube series? Come on.
Second, electric start?
Not to worry! We still have the YZ125, and 03 CR250 series happening right here. And you can win both of them!
tune in for uncle tonystooltime! keep it up bros
CoOlToOlFeAtUrE!!! 😍
C&T! You guys are the best so funny and knowledgeable this should be a sick build. I totally wished y’all we’re closer to me to hang out haha keep it twisted bros
Thanks for being an OG, Ty!
You rule Tyler! I second that. We could yell Bob Saget all the time.
Tony
@@MXSkillShack thanks for the bad ass builds posts and vids bud!!!
@@MXSkillShack oh hell yeah we could yell Bob saget as loud as shit anytime somthing went off the wall! hahah hope all is well with you guys and the families 😉
Sickest channel!
You RULE Shelby!
Tony // MXSS
Do u guys fit your own condors
We don’t own any giant birds… and we don’t use those other things either 🤣
First an great job guys
Winner, winner! Thanks for hanging with us!
Why communist tic tac?
No idea what that means, but we’re intrigued 😂
Loving it!!!!!!!!!!
Going down, brother!!
Another great video!!!
Thanks for being there, Joel!
Thank you Joel!
Tony