You cleaned the parts excellent. But after refitting the mainspring in the barrel, the lid has been dirty. It could have been cleaned with rodico before the assembly.
I have this movement, but no longer works. Mainspring work, click and reduction and crown wheel works, and can be wound. But stuck at train wheel and escape wheel.
@@magicofwheels how many times you picked up a watch part with a pair of tweezers and it goes flying into the watch part abyss and you cannot find it for nothing before you know it you're on your hands and knees with a magnet you can't find it for nothing my life has been hell lolz 😂🙄 I hate my life... 😂😂
@@donnyalvarez7 Hahaha, I remember once the cap jewel flew off my tweezers and I spent more than an hour finding. I was so frustrated because normally I would hear something dropped and that was how I knew where about to look for. That case I heard nothing. I was about to give up and I ran my hands across my hair facing down my workbench feeing despair. The jewel dropped from my hair. 😀
ruclips.net/video/m8-kcDW7XFs/видео.html ruclips.net/video/T03FZ_VrhuM/видео.html Ebay can be a very good source. This steps 1 Search for the dial and hands that fit the movement (important to mention the movement series such as Miyota 2805) 2 search for the case mention the movement too. (normally comes with crystal and gasket). Important to see the case that fits the diameter of the dial. It should be stated on the item description.
I notice the way you oil the balance jewel is different than usual. And when installing the balance cap jewel we have to slide it in and rotate it, I wonder would that disturb the oil?
thank you for your video! It helped me service the same movement! But i have a question, my power reserve cant seem to last more than 10 minutes, i can't seem to find the issue, i need your help please!
there are many possibilities. If you can show me video that would help a lot. however you need to check 1. Mainspring, if it is in good condition. Can it be wound up? 2. pallet fork. Check if the staff still good. 3. balance wheel, check if the staff still good, impluse jewel is centered. hope those points help. :)
@@magicofwheels thank you for your help, my parts arrived. changed the parts you mentioned and my watch works like a gem now. thank you sir, your videos are very good
i have a question for you sir! When i turn my crown to quick set a date, the date change mechanism doesnt seem to latch on and it changes very slowly instead of the "jump" that we usually get.
@@magicofwheels Thank you! I checked the moebious oil chart and according to it u can oil an entire movement with just d5 and 8000. i just ordered those two. Do you think that's fine? i also bought those 2 only since i wont even use up them before they expire so it feels kind of wasteful to buy like 6 oils
@@alfredenglund To me, the answer is yes for better performance because each wheels has difference torque or pressure. For example, metal rubbing with rubby, metal rubbing with metal in circular motion and linear motion, each oil or grease has it own density which suitable for each specific area. Also, yes it is a waste for a hobbyist like me, I never use up all the oils. However, I think the feeling of doing this hobby to the highest standard that I could reach and perfirmance of the watch after service trade that off. Apart from quality tools, now we all know why the cost of service is skyhigh.
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Thank you for naming all of the parts as you reassemble the movement. Very few will do that.
Great job! That main plate didn’t give you any trouble at all. You demonstrate great skill at this!
Thank you for your compliment. Still a lot more to learn. :)
Done on the highest professional level, respect!
thank yoi
Excellent work be safe and thank you
Thank you very much.
There is a tool that winds the mainspring cleanly. You can get that.
Your voice is so comfortable, nice
Thank you
i wish i could sent my Miyota to you. excellent videos
Thank you. The shipping cost wouldn't worth it. :)
You cleaned the parts excellent. But after refitting the mainspring in the barrel, the lid has been dirty. It could have been cleaned with rodico before the assembly.
Thank you very much. I will take your advice. 😀😀
I have this movement, but no longer works. Mainspring work, click and reduction and crown wheel works, and can be wound. But stuck at train wheel and escape wheel.
you want to check the staff of each wheel specially balance wheel and pallet fork.
You are not a hobbyist you are a professional
Thank you for your compliment. I am glad you like my videos.
@@magicofwheels how many times you picked up a watch part with a pair of tweezers and it goes flying into the watch part abyss and you cannot find it for nothing before you know it you're on your hands and knees with a magnet you can't find it for nothing my life has been hell lolz 😂🙄 I hate my life... 😂😂
@@donnyalvarez7 Hahaha, I remember once the cap jewel flew off my tweezers and I spent more than an hour finding. I was so frustrated because normally I would hear something dropped and that was how I knew where about to look for. That case I heard nothing. I was about to give up and I ran my hands across my hair facing down my workbench feeing despair. The jewel dropped from my hair. 😀
@@magicofwheels 😂😂😂
Nice job. Can you suggest a case, cristal, gaskets, etc? Kit for this movement, please?
ruclips.net/video/m8-kcDW7XFs/видео.html
ruclips.net/video/T03FZ_VrhuM/видео.html
Ebay can be a very good source.
This steps
1 Search for the dial and hands that fit the movement (important to mention the movement series such as Miyota 2805)
2 search for the case mention the movement too. (normally comes with crystal and gasket). Important to see the case that fits the diameter of the dial. It should be stated on the item description.
try seller by the name: raffles-time
I notice the way you oil the balance jewel is different than usual. And when installing the balance cap jewel we have to slide it in and rotate it, I wonder would that disturb the oil?
Thank you for your comment. I will look more into that. 🙂🙂
thank you for your video! It helped me service the same movement! But i have a question, my power reserve cant seem to last more than 10 minutes, i can't seem to find the issue, i need your help please!
there are many possibilities. If you can show me video that would help a lot. however you need to check
1. Mainspring, if it is in good condition. Can it be wound up?
2. pallet fork. Check if the staff still good.
3. balance wheel, check if the staff still good, impluse jewel is centered.
hope those points help. :)
@@magicofwheels thank you for your help, my parts arrived.
changed the parts you mentioned and my watch works like a gem now. thank you sir, your videos are very good
You are most welcome and I am glad my videos and my comments help.
Great!
Miyota 82 is a realiable movement, however the second hand hesitation problem always happene when shaking the watch
true but it doesn't effect time keeping though.
i have a question for you sir! When i turn my crown to quick set a date, the date change mechanism doesnt seem to latch on and it changes very slowly instead of the "jump" that we usually get.
You might wat to check jumper spring and corrector wheel. Hope, that helps.
Nice movie
Thank you
Sir namaste
🙏 namaste 🙏
How long does this lubrication last in a brand new watch ?
at 5th year the lubribation starts to degrade at 10th year you should notice some abnormality.
Is there a reason for the calendar wheels to be made of plastic?
I beleave it's costwise. :D
@@magicofwheels UNBELIEABLE.
Wow
😁
can i have a list of all the oils u used?
Yes, here they are,
Moebius 8212
Moebius 8200
Moebius 9010
Moebius D5
Moebius 9415
Moebius 9504
@@magicofwheels Thank you! I checked the moebious oil chart and according to it u can oil an entire movement with just d5 and 8000. i just ordered those two. Do you think that's fine? i also bought those 2 only since i wont even use up them before they expire so it feels kind of wasteful to buy like 6 oils
@@alfredenglund
To me, the answer is yes for better performance because each wheels has difference torque or pressure. For example, metal rubbing with rubby, metal rubbing with metal in circular motion and linear motion, each oil or grease has it own density which suitable for each specific area.
Also, yes it is a waste for a hobbyist like me, I never use up all the oils. However, I think the feeling of doing this hobby to the highest standard that I could reach and perfirmance of the watch after service trade that off.
Apart from quality tools, now we all know why the cost of service is skyhigh.
@@magicofwheels Hahahha yeah.
i like you how you treating your jope
Thank you.