Placing your hands on a belt sander and applying 200 lbs of pressure is what a road crash feels like on your hands. But that’s not the worse part. At the hospital, they have to remove all the gravel embedded in your open flesh with a little plastic scrub brush to prevent infection. If you’re like me, you have to find out for yourself. Bike sounds great.
Just get a cheap pair with palm sliders for now from cycle gear or something Anything is better than nothing though. You'll get used to it in no time and will feel naked if you don't have them on. Your bike sounds awesome. I miss that sound I got rid of my R1 in 2019.
I love the sound of that cross plane 4. There are a couple R1s running around my neighborhood and I hear them late at night hitting the on ramp to the interstate running through the gears. It's music.
I’ve been loving your MT10 SP content bro. Waiting on mine to be delivered next week or the week after and cannot wait. Do you know if the 2016-2021 MT10 exhausts fit on the new 2022? Also, did you get the bike tuned yet for the exhaust?
Look man i ride like a squid all the time but gloves are a 100% must. You come off even at 30 and your hand will literally come off. Scrapes and broken bones can mend and leave no lasting impact. But losing a hand is life changing.
@@Builtmoto My man! I wan't to take videos like this! I have a gopro hero 7 black. I assume you are using a chin mounted gopro. I've looked up settings and got it pretty much set up. I was wondering two things though, what is this video captured in? (16:9/4:3, superview/wide) And I noticed the wind noise isn't bad at all, do you just have the wind mic setting on or do you have some sort of foam over the microphones?
Am i the only one who loves the cp4's howling mid range noise? I wish they could put this on a muscle cruiser. With higher displacement, more torque and lower rev range to maximize that sweet noise. Not everyone likes their engine screaming all the time. It's not good for gas mileage too.
Yeah they do sound Amazing, even in stock format. Just did my first thousand kilometer oil change so now it's time to rip. I'll have to try and find somebody local in Ontario Canada to do the ECU Flash. I'll have to reach out to Hindle they're only about 45 minutes from me, I had their full system on my 2006 and 2010 FZ1. Enjoy the Ride, I do!
I am 6’1 or 185cm and 210 lbs or 95kg and the MT09 fit me well but the MT10 offers me a little more wind cover. Both bikes have more than enough power to move me around
The cross plane R1 engine is absolutely music to my ears! The fact the basically the same engine is on an upright bike… job well done Yamaha! Sucker sounds beautiful my man! 👍🤘👏 Is the quick shifter factory?
Nice bike, mine is plane, black. I love the SP paint scheme. Great job filimg, I roll with Hero8 and the 360. Are you able to figure out the GoPro 360 edit process, to post here on YT?
damn that sounds amazing, no tune yet? Im getting mine flashed/tuned this week, I might just have to get me one of those AR exhausts the note sounds way better than mine even though I do still think the Akra link pipe with stock can sounds just fine this one just sounds insane
mine is getting a tune done next weekend and man the AR can is insanely loud! I feel bad for any houses that I pass in the morning because even being above the 5k rpm range it gets insane!
@@Builtmoto hell yea its going to feel so much better once its un restricted im excited and yea I know what you mean its going to be a little bit to get used to having it so loud, when I had my 2017 zx10r I rocked the Brocks alien head and it was the loudest exhaust ive had eventually I got used to it and didn't bother me I love hearing the engine scream, mine ran half way decent when I put link pipe on but definitely is lean you can tell when trying to cruise just feels a little harsh on off throttle and it runs way hotter I believe they can change the fan temp to come on sooner which it didn't really run hot before putting link pipe on so I think with proper air fuels its fine but nice to have fan kick on sooner anyway keep it as cool as possible
Just got mine as a gift from the gf, I was watching your vids and never knew mine was coming. Hahaha still deciding on some protection bits before riding. Are the s22 tires on the stock ones same as aftermarket s22 or no?
so the stock S22 and the new S22 are totally different from my experience on my 2021 Mt-09 and the replacement tyres will last around 1000-1500 miles more
How do you not giggle the whole time with that exhaust? Almost all of my neighbors would hate me. The guy who rides would probably come over to check it out.
attack performance or Dallas super bikes. I am waiting to hear back from attack but I do know that Dallas super bikes can get me in and let me film dyne pulls and dyne tuning!
Awesome bike and awesome-er sound. Now for the love of God put some Gloves on. Crazy story. Been riding long ass time. I’ve only not wore gloves on one ride in my entire life 20+ years. Well had a Tank slapped that day. I forgot my gloves cause I was driving my car to where my bike was at the time realized it. And refused to turn around to “save time” 5 years later my right hand and thumb is still fucked. ain’t worth it . Don’t care how hot it is . Don’t care how I’m comfortable it is. Trust me. The result of no gloves and a crash is much much more uncomfortable
@@Builtmoto thanks for replying. These two bikes im looking into because they dont sounds like ever other inline 4. which did you find for riding around town to be more comfy?
I preferred the MT because the V2 got very hot for most low speed and around town riding, my calves were very uncomfortable after a 30 min ride through downtown Dallas
@@Builtmoto so MT it is then. I looked at exhaust and seen that the MT is more Affordable which is probably the same with maintenance I would guess. Plan to make more MT vids like this?
Everything is cheaper on the MT even the tuning, and I keep planning to but my new job and kids make it a little more complicated to go out and film and then sit down and edit. But I will try for sure!
Did you do AIS block off? I'm having mine flashed and putting on a black widow mid pipe this week but the folks at 2WDW say the 2022 is different than the Gen 1 and that the AIS system is in an default open position so it'll pop like crazy what has been your experience?
It does pop quite a lot! And they are very loud and aggressive pops. I am getting a tune done within the next month to see if it can be cleaned up, because it is running super rich
That was a issue for a little while but as soon as I got the bike tuned that all went away. It was restricted in the original tuning of the bike as to keep the front wheel on the ground
@@midnightt6991 mine is currently tuned by Dallas superbikes but I am looking at sending my ecu off to 2wheeldynoworks for a less aggressive tune because the bike currently is running very rich and pops and bangs on decel
@@Builtmoto that’s who mine is flashed by and I still have this “dead zone” in the throttle. I can’t even cruise because bike either falls flat on its face or it wants to accelerate.
The bike is installed with a quick shifter so after I get into 1st gear the bike will do the rev matching and auto rev blipping for me as I push down or pull up on the shifter
it has happened a few times already but I am trying to find a set of gloves that offer protection and do not pull my fingers outward to the point that they start cramping
Do they have decent air flow? A leather glove is nice until it is stuck on your hand from 100 degree weather causing the glove to shrink and your hand to sweat lol
the bike has a quick shifter installed that allows me to up and downshift without using the clutch. I only have to use the clutch when leaving a stop in 1st gear
I do a lot of highway riding back and forth to work so having one of if not the loudest system on the market makes me far less likely to get merged into.
1) I have yet to see ANY MT-10 with a pipe/cat change that DOESN'T spit, pop and burble, even the ones supposedly "re-flashed". 2) No gloves? Hurts when you crash. 3) I would hate to own a bike like this in a place with no hills.
Sadly Texas roads are pretty flat and straight but luckily there are a few race tracks around that I can get to pretty quickly and ride the bike like it is designed to be ridden!
Yep, the bike is installed with a factory quick shifter up and down. So after first gear I do not have to use the clutch to up shift and when downshifting the bike will auto blip as well. It is super cool technology that has made its way down to most large CC naked bikes now
Uppdate how this fake "800 dollars" china Austin Racing is holding upp. Maybe I will go for this also but not paying more then what they are sold for wich is around 200 dollars.
Placing your hands on a belt sander and applying 200 lbs of pressure is what a road crash feels like on your hands. But that’s not the worse part. At the hospital, they have to remove all the gravel embedded in your open flesh with a little plastic scrub brush to prevent infection. If you’re like me, you have to find out for yourself. Bike sounds great.
I am still trying to find a set of gloves that I like that do not end up hurting my fingers after any sort of long ride
@@Builtmoto gotta break gloves in if they are leather
Just get a cheap pair with palm sliders for now from cycle gear or something Anything is better than nothing though. You'll get used to it in no time and will feel naked if you don't have them on. Your bike sounds awesome. I miss that sound I got rid of my R1 in 2019.
@@Builtmoto five are doing great gloves you can't even feel they are on
Let the people wear or not wear what they want
I love the sound of that cross plane 4. There are a couple R1s running around my neighborhood and I hear them late at night hitting the on ramp to the interstate running through the gears. It's music.
Damn this bike is no joke. Just music to the ears. Makes sense because Yamaha makes amazing instruments.
Praise be for Yamaha and those CP engines. All 3 CP offerings are amazing
I loved my 21 MT-09 and this MT-10 SP is simply perfect!
@@Builtmoto how do you compare handling? I believe 10 has much better feel ( prev gens experience).
Which is the 3rd? 700? I know about the 9&10.
@@jasongaudreau2075 Necro kinda but yeah the mt7 has the cp2. Parallel twin and easily my favorite sounding parallel twin.
Sounds better than my buddy's RSV4. I thought my AR on S1KRR was loud. Sounds like a GP bike. Ride safe!
It is VERY loud. I was never a rider to use ear plugs when I rode until I got this exhaust setup lol. But thank you!
I’ve been loving your MT10 SP content bro. Waiting on mine to be delivered next week or the week after and cannot wait. Do you know if the 2016-2021 MT10 exhausts fit on the new 2022? Also, did you get the bike tuned yet for the exhaust?
The exhaust fitment is the same and I am getting it tuned next week
Love the sound of this bike.
Bike looks and sounds amazing!
Thank you!
FINALLY SOMEONE POSTING A AUSTIN RACING FULL SYSTEM ON A CP4!!!
sorry but I got a bhone hearing the cp4 through Austin racing lol
I love how at high RPMs it starts to sound like an I4 screamer.
Look man i ride like a squid all the time but gloves are a 100% must. You come off even at 30 and your hand will literally come off. Scrapes and broken bones can mend and leave no lasting impact. But losing a hand is life changing.
Beautiful exhaust by a awesome company. Phenomenal.
thank you!
@@Builtmoto My man! I wan't to take videos like this! I have a gopro hero 7 black. I assume you are using a chin mounted gopro. I've looked up settings and got it pretty much set up. I was wondering two things though, what is this video captured in? (16:9/4:3, superview/wide) And I noticed the wind noise isn't bad at all, do you just have the wind mic setting on or do you have some sort of foam over the microphones?
5:27 oml that sound 😩
it is truly a intoxicating sound!
Am i the only one who loves the cp4's howling mid range noise? I wish they could put this on a muscle cruiser. With higher displacement, more torque and lower rev range to maximize that sweet noise. Not everyone likes their engine screaming all the time. It's not good for gas mileage too.
it sure is an amazing noise though!
Love that sound. ❤
Lam really went from average 1k views to 20k+
Proof that we unite no matter what.
Great video, nice SP music to my ears🔥👍
Thank you!
Awesome sound!
Watch out for those hands. Scrapey, Scrapey 😢
Yeah they do sound Amazing, even in stock format. Just did my first thousand kilometer oil change so now it's time to rip. I'll have to try and find somebody local in Ontario Canada to do the ECU Flash. I'll have to reach out to Hindle they're only about 45 minutes from me, I had their full system on my 2006 and 2010 FZ1. Enjoy the Ride, I do!
I will be sending mine out for tuning within the next month just due to how rich the bike is running right now!
Sounds like a beast 👍,I love your Mt 10.
I’ve seen one for the first time Thursday at (orange julep) Montreal, canada and all I could say is wow.
Thank you! Lot of people have expressed their dislike for the front end but I personally think that in person it looks much better!
@@Builtmoto that’s what they said about the 2021 mt 09.
Can you really hear the pressure from the two air intakes on the tank? Or is it just for decoration?
When I had the stock exhaust you could actually hear it, now that I have the Akra system on it I have to lean down in order to hear it.
@@Builtmoto Losing a good sound for an even better sound is probably worth it 🤪
@@genco8915 I would say it was very worth it
Got a new Mt09 since the mt10 felt a little too large for me, but dang man that bike sounds and looks so good.
You messed up
@@landoflakes92mt09 is great too
What size u are? I am 177 and 74kg. Idk to buy 09 sp or mt10
I am 6’1 or 185cm and 210 lbs or 95kg and the MT09 fit me well but the MT10 offers me a little more wind cover. Both bikes have more than enough power to move me around
@@Builtmoto i am aftaid the mt10 is to big for me but mt09 will be ok. I move from 600rr 08y. Have enough 600cc... engines
This bike is filthy🔥
The cross plane R1 engine is absolutely music to my ears!
The fact the basically the same engine is on an upright bike… job well done Yamaha!
Sucker sounds beautiful my man! 👍🤘👏
Is the quick shifter factory?
Miss the uploads, where’ve you been man!
Sounds good!
Thank you!
Do you have a link for the exhaust you bought? I see a different option for the 2022-2023 models but some people say the 15+ fits as well.
Probably the best sounding exhaust for this bike cant wait to get mine
*R1 sound on race PTSD*
Story is I was at a racetrack for 2 days and at night i'm hearing CP4 in my ears while i'm trying to sleep.
Amazing vid, Amazing Bike and sound!! But Where are your Gloves mate?😩
Nice sound wich brand are you gloves?
the day i get my hands on an MT is the day ill stop being depressed
Nice bike, mine is plane, black. I love the SP paint scheme.
Great job filimg, I roll with Hero8 and the 360. Are you able to figure out the GoPro 360 edit process, to post here on YT?
Great machines 👍
Yes they are!
Sounds amazing man make more videos please! Lol
When you change for full exhaust no choice go on dyno to tune bike no?
Is that copy of AR ? I know that pipe. I use to run that before my spark arrived. For the price... They sounds really good.
saw a girl on a hd get "de gloved" about 20 years ago , worn gloves ever since . on a brighter note this sounds almost as good as a speed triple 😊
Lovley sound. Why so slowley?
damn that sounds amazing, no tune yet? Im getting mine flashed/tuned this week, I might just have to get me one of those AR exhausts the note sounds way better than mine even though I do still think the Akra link pipe with stock can sounds just fine this one just sounds insane
mine is getting a tune done next weekend and man the AR can is insanely loud! I feel bad for any houses that I pass in the morning because even being above the 5k rpm range it gets insane!
@@Builtmoto hell yea its going to feel so much better once its un restricted im excited and yea I know what you mean its going to be a little bit to get used to having it so loud, when I had my 2017 zx10r I rocked the Brocks alien head and it was the loudest exhaust ive had eventually I got used to it and didn't bother me I love hearing the engine scream, mine ran half way decent when I put link pipe on but definitely is lean you can tell when trying to cruise just feels a little harsh on off throttle and it runs way hotter I believe they can change the fan temp to come on sooner which it didn't really run hot before putting link pipe on so I think with proper air fuels its fine but nice to have fan kick on sooner anyway keep it as cool as possible
@@psyfertech ㅏ
Just got mine as a gift from the gf, I was watching your vids and never knew mine was coming. Hahaha still deciding on some protection bits before riding. Are the s22 tires on the stock ones same as aftermarket s22 or no?
so the stock S22 and the new S22 are totally different from my experience on my 2021 Mt-09 and the replacement tyres will last around 1000-1500 miles more
I can’t find a tune 😅😅where did you get yours
This is in my neck of the woods.
Sounds like a high revving mini V8
How do you not giggle the whole time with that exhaust? Almost all of my neighbors would hate me. The guy who rides would probably come over to check it out.
It is awesome and yes I am sure that all my neighbors in my apartment complex love me when I leave for work every morning lol
Powershifting?? Damn bro the clutch right there
The bike has a quick shifter haha. Clutch less up and down shifts and the bike rev matches
She purrs like a Beast….❤️❤️❤️
she sure does!
I can't believe there are people who ride without gloves.
only sometimes lol
Love the content. I have my AR exhaust in the fabrication queue as we speak. Who are you doing your tune through?
attack performance or Dallas super bikes. I am waiting to hear back from attack but I do know that Dallas super bikes can get me in and let me film dyne pulls and dyne tuning!
@@Builtmoto awesome! I'll be checking out black widow here in San Antonio
mine is also in the fabrication queue. When did you order yours?
@@jbnissa626 I believe it was on 8/9
@@RealCrispCreations i ordered mine 10 days before you so we should get it around the same time. Can't wait, the bike is way too quiet currently
What can you really plug into the DC cigarette plug? Curious. It only has a 1 AMP rating.
I typically only ever plug in my GoPro 360 to keep it charged up as I’m riding. But I have never had the fuse blow
Did you do mapping?
gloves mate, you'll thank yourself afterwards!
Awesome bike and awesome-er sound. Now for the love of God put some Gloves on. Crazy story. Been riding long ass time. I’ve only not wore gloves on one ride in my entire life 20+ years. Well had a Tank slapped that day. I forgot my gloves cause I was driving my car to where my bike was at the time realized it. And refused to turn around to “save time” 5 years later my right hand and thumb is still fucked. ain’t worth it . Don’t care how hot it is . Don’t care how I’m comfortable it is. Trust me. The result of no gloves and a crash is much much more uncomfortable
which did you find faster in a straight line, the V2 or the MT10?
The MT takes off quicker and will get to 80-100 quicker then the V2 comes around
@@Builtmoto thanks for replying. These two bikes im looking into because they dont sounds like ever other inline 4. which did you find for riding around town to be more comfy?
I preferred the MT because the V2 got very hot for most low speed and around town riding, my calves were very uncomfortable after a 30 min ride through downtown Dallas
@@Builtmoto so MT it is then. I looked at exhaust and seen that the MT is more Affordable which is probably the same with maintenance I would guess. Plan to make more MT vids like this?
Everything is cheaper on the MT even the tuning, and I keep planning to but my new job and kids make it a little more complicated to go out and film and then sit down and edit. But I will try for sure!
This bike only have 2 problems imo: the price and the dashboard still the same of my 20179 tracer900 gt...
Did you do AIS block off? I'm having mine flashed and putting on a black widow mid pipe this week but the folks at 2WDW say the 2022 is different than the Gen 1 and that the AIS system is in an default open position so it'll pop like crazy what has been your experience?
It does pop quite a lot! And they are very loud and aggressive pops. I am getting a tune done within the next month to see if it can be cleaned up, because it is running super rich
@@Builtmoto got my black widow mid pipe installed....ECU is out with 2WDW right now
@@xdjosh1980 does 2WDW have tunes for our bikes? I have looked at almost every other company and nobody has full exhaust tubes for them yet!
That sounds crazy loud. Do you wear ear plugs?
I didn't before even with my MT-09 and a full akra system but I do now!
Hey man, did you have any issues with the throttle being delayed or not responsiveness up to a certain point then it kind of kicks in?
That was a issue for a little while but as soon as I got the bike tuned that all went away. It was restricted in the original tuning of the bike as to keep the front wheel on the ground
@@Builtmoto who did you get yours tuned by?
@@midnightt6991 mine is currently tuned by Dallas superbikes but I am looking at sending my ecu off to 2wheeldynoworks for a less aggressive tune because the bike currently is running very rich and pops and bangs on decel
@@Builtmoto that’s who mine is flashed by and I still have this “dead zone” in the throttle. I can’t even cruise because bike either falls flat on its face or it wants to accelerate.
@@midnightt6991 are you running premium gasoline? I have noticed that if I put anything lower that 93 octane in mine it hesitates between 4-7k rpm
Insana volta de yamaha MT-10
Obrigado!
Be honest, is it too loud? Everyone in my mt10 page on Facebook says it’s just too damn loud.
I’m a new rider myself but how is he switching gears without pulling in the clutch?
The bike is installed with a quick shifter so after I get into 1st gear the bike will do the rev matching and auto rev blipping for me as I push down or pull up on the shifter
Sound is epic. Put some gloves on bro please. 😢
Would you mind dropping a link for the exhaust? Thank you
How much did it cost? And did you get it tuned?
it was $700 for the exhaust and I have not got the bike tuned yet but the computer will be going out for a flash within the next 2 weeks
@@Builtmoto somebody fooled you man. you can get this fake Austin for under 200 dollars😁
Aye your in Dallas!?
Hell yea!
Full system?
Leave the guy alone about the gloves.
U pay ur money, u take ur chances.
U do u bro.
Founder's Plaza :P i ride here too.
Don't tell me, that's in one of those states in America that doesn't allow Lane filtering....but you can own an assault rifle 😜
Is this DFW area?
Yes north Dfw area
GLOVES?????
Gp1, gp2 or v3?
ebay special. looks alot like the gp1 but is stainless instead of titanium
I got a mt10 2022 and i want an austin but im in europe :(
get some bloody gloves on!!
haha alright I will make sure I have gloves on next time!
Only one little wheelie on this ( safe ) wheelie machine? But nice motorways you have out there 👍🏻 I enjoyed the road layout
haha I still had wheelie control turned on quite high as I learned the engine. I do wheelies a little more but still have wheelie control turned on.
No gloves all good until a 18 wheeler propels a rock into your knuckles.
it has happened a few times already but I am trying to find a set of gloves that offer protection and do not pull my fingers outward to the point that they start cramping
@@Builtmoto Knox are also doing great gloves with perfect protection
Do they have decent air flow? A leather glove is nice until it is stuck on your hand from 100 degree weather causing the glove to shrink and your hand to sweat lol
Alpine stars "chrome", and you can thank me later lol. I went through 4 sets before finding my perfect lightly armored but comfortable street glove.
Ho you switching gears without the clutch
the bike has a quick shifter installed that allows me to up and downshift without using the clutch. I only have to use the clutch when leaving a stop in 1st gear
Love the bike love the sound but riding without gloves? that i dont love.
Fair enough! i do not do it often!
Pas de gants 😮
What made you choose the Austin exhaust for this bike?
I do a lot of highway riding back and forth to work so having one of if not the loudest system on the market makes me far less likely to get merged into.
Understandable. I put an order on the mt-10sp to add to my garage got the 15 R1. Definitely got to order that exhaust then.
Have you had a chance to hear a Toce exhaust? if so, which in your opinion is louder?
He has jacket👍many in US only t-shirt and gloves😩
Nice exhaust mod - but riding without proper leather gloves 🤔🤔
Why are you not wearing gloves?
1) I have yet to see ANY MT-10 with a pipe/cat change that DOESN'T spit, pop and burble, even the ones supposedly "re-flashed". 2) No gloves? Hurts when you crash. 3) I would hate to own a bike like this in a place with no hills.
Sadly Texas roads are pretty flat and straight but luckily there are a few race tracks around that I can get to pretty quickly and ride the bike like it is designed to be ridden!
Wtf are you downshifting with out the clutch.
Yep, the bike is installed with a factory quick shifter up and down. So after first gear I do not have to use the clutch to up shift and when downshifting the bike will auto blip as well. It is super cool technology that has made its way down to most large CC naked bikes now
spend all that money on a bike/exhaust and dont wear gloves!!!!
Agree
I mean, gloves aren't expensive 😢 just plain crazy.
Guy must not like having hands
Sounds like a lady screaming😂😂
bruh wheres the gloves...
Why aren't you wearing gloves?
all the gear but no gloves doesnt make sense
I guanti 🧤
Eargasm
Who needs gloves?
haha I am trying to find a set that offer protection and don't cause my fingers to cramp after a longer ride!
Uppdate how this fake "800 dollars" china Austin Racing is holding upp. Maybe I will go for this also but not paying more then what they are sold for wich is around 200 dollars.
It sucks yamaha had to put the ugliest front end on the best bike ever made
Put some gloves on!
It sounds so good but damn it’s an ugly bike. Why are all of Yamahas super sports so good looking but their nakeds are hideous??
it is not the best-looking bike but the fact that I sit behind the headlight and the performance that the bike offers make up for that
I love the looks of these bikes hands down
No gloves, yuck.