Fuel Pump Upgrade| fuel pump replacement | Walbro 255 | 1jz Supra
HTML-код
- Опубликовано: 12 сен 2024
- Please watch: "Garage Life Hack!"
• Garage Life Hack! Pene...
~-~~-~~~-~~-~
Get the products used in this video and support PMM by shopping through our store: astore.amazon.c...
The guys at PMM show you how easy it is to install an aftermarket fuel pump, and even show you how to fix broken fuel lines if you happen to brake a fuel line like they did!
Get a Walbro fuel pump here: www.amazon.com/...
/ pmmods
/ poormanmods
www.pmmods.com
Thanks for checking us out! Apparently there is a Forum Built directly for this style supra where everyone just bashes on it. I personally don't mind wrenching on this model, there were a few questionable problems and you would sit back and ask what was Toyota thinking.. but that quickly passes. lol
For others that may be doing this in the future. If you are doing this for performance you most likely will have an aftermarket rail and injectors anyways. My 91 alltrac was in about the same shape as this or worse. Cut off feed line from the pump assembly and used a stepper drill bit to increase the whole size to accept a 90 degree 6an bulk head fitting with a barb on the bottom end. Then just did SS line up to inline fuel filter and then up to rail. Super easy and removes all the other old hard lines or rubber between. My return I just left the stock hard lines and replaced the end rubber. Thanks for the upload
thanks for the tip! going to try this out soon!
Very valid point, yes we used shrink tubing around our connections.
You can use a MKIV Fuel pump in a pinch. Just for the people who can't find a Walbro. Good video!
We didn't "wash" out the tank per say. Freddy put a product called HEAT in the tank when he first bought it to loosen up any loose rust/bad gas and we swished it around within the tank and drained it appropriately.
honestly im not sure, the pumps may be different lengths for different cars but i honestly can no say for sure. your best bet is to try to find one that says its for your car if you can
Nice episode guys. I'd like to say to Imran, it is safe because the only difference between an electric fuel pump and an electric water pump is the fluid being transferred and that water's safe to stand in with out being zapped. That and fuel needs a spark to ignite. Now with that said, I sure hope you boys used shrink tubing on those butt connectors because tharts a potential source for spark in your main fuel source.
doesnt a stock supra power the pump with 9v at idle and 12v at WOT? and a walbro uses 12v at all times, how did you guys remedy this
Pause the video at 8:07 and look at them closely. The screws did not have socket heads on them. They were simply circular. Aside from that, this technique is helpful to know how to do anyway, agreed?
yup! Walbro is the brand
3:15 to 4:15 is the best clip y'all have ever done! Can you do an ep. where y'all only use the voices you used in this ep.
man that was a Kool intertaining video great instructions and funny as hell at the same time.Hope you guys keep the videos coming. I have a 89 supra that I will be doing a fuel pump on. Keep the videos coming. have a good one guys. Kenny
Thank you very much, we really appreciate it! We have over 50 install videos on our supra, make sure you check them out :D
Why not use a wrench on the screws??? They have 8-10mm heads on them...
Thank you very much! We have a lot more to show
Forest gumo installed MK3 fuel pump, helped me with my install
Theres no need to add are relay for the walbro 255 ?
Do you had to do the 12v fuel pump mod ? :)
Nice video guys! I'm glad to see your sharing some detailed info on RUclips for the MKIII. Fun to watch too. Haha. Thx. ;-)
I just ordered a P2M 340lph FP and the P2M FPR for my s13 with an sr20det. I have 740cc FI.
hahah thanks! i think to do that we would need a pretty large vote from out audience to give us the "OK" to do that, we dont want to annoy anyone :D
Hi, did you guys remember to put the locking washer on the strainer?
Keep up the great vids! :)
If I switch to 1 of these pumps and don't change anything else
Will my fuel pressure rise?
thats how it was designed, ive never heard of it being unsafe
Well done on another great video.
My fuel pump was bent right in the same spot on the hard line went to take it off and it snapped looks like I’m flaring too, I’ve never done it wish me luck
so much easier in an sc300 :D thank god
Thank you very much!
2001 model audi a4 1.8t 200hp and 300 torque tool that my audi fuel pump malfunctioned. High-pressure fuel pump Walbro gss342 bought. But the master said; 'Fuel pressure of the rich fuel mixture begins to occur with higher performance than the original pump and motor are lost,' 'he said What is your thought on this issue and to recommend?
Hi do you have to remove the staps off completely cause I didn't see you guys remove the two sets of the bolts that holds the other end of them two straps I think their 14mm in size ?
thanks! And sure they could! But we know a few people that just run 2 255's :D
I. E. X,,,,,65,,5,, is bc
Can’t wait o
Did you remove the J tube on the block that raises fuel pressure?
What’s the name tool you used for the metal line you twisted?
Nice video keep it up!
What's the rest of the part number for that walbro 255.
And any walbro will work with any car if it has the general layout?
I have a Datsun 81 280zx turbo and I don't quite know which fuel pump I should get for it. Anyone have any advice on it? I also can't seem to find the strainer that goes inside the tank on the pick up line. The car has an external pump.
which wire is the positive and which is negative?
ha pmm how come the fule pump +&- ends are in the tank? is that safe?
What's a Walbro? A brand? I really don't know.
hm, i didnt know that.
thanks! :D
Just found your channel. Nice work. I wish I had more time to do some stuff like you have been. Check out my stuff, its kinda the same. I work in the oil and gas industry so I'm usually never home, but when I am, I do similar stuff. Thanks for helping out the community.
Not to be disrespectful but why does the big guy in the green shirt speak funny? Does he have a speech impairment?
+zombiecheef he is joking. its intentional. he is the same guy who was explaining the drill with the hammer effect.
You guys located in PA?
Yup!
touché.
what's the difference between a buffalo and a bison. Answer, You can't wash your hands in a buffalo.
I would just cut the floor
Not me