I did the same mod except the timing advance. At top speed it feels like 40mph! I know because I have two Taco 100b's they will do 45mph stock zero mods! Excellent video! Thank you for helping the mini bike community and its viewers out!
You what I'd like to see? A direct comparison between a HF 79cc and the GPS 98cc. They are rated the same but one is 20cc's more. Maybe run them on the same bike? Will a steel 79cc cam fit in a 98cc? will an aluminum 79cc fly wheel fit on a 98cc? etc
@@DiegoHernandez-pu6ps I don't know how fast a stock one is, I never used the 98cc engine, dropped a 212cc Predator in it, geared @ 12/60 it does 41 mph with the governor still in it and a 210 lb rider.
I have a 98cc on my Mega Moto... Could not really find any serious aftermarket support aside from a factory cam that gets reground along with a little head work. I bet if the aftermarket support is there these little 98cc motors could hit 7-8hp @ 9000 rpm. I would seriously build one. Be nice to see billet rods, stroker kits, big bore options etc...
cant wait to see more of this build! i have a 79cc i already took off the governor and added a slide carb. have a coleman 3.0 as well and wondering which one should stay on the mini bike for my 7 year old.
The ghost 212 head and Lifan 7.5 from the mega moto 212 both have "ported" heads from the factory. Would you please test the heads back to back to see if there is any performance differences?
I have a Mega Moto 80 with a 98cc engine, and I'm looking to remove the governor. However, I can't seem to find a flywheel that fits. It seems like billet flywheels aren't available for 98cc engines. I understand that it's recommended to replace the flywheel when removing the governor to prevent the stock flywheel from exploding at high RPMs.
That was the stock cast flywheel in this video. it now has a billet flywheel in other videos. Always recommend a billet flywheel if you're gonna spin the engine past the governed speed.
I've noticed you did put an upgraded flywheel on or a rod. I know for the 212 or larger you have to upgrade the internals (at least I did), but maybe not for this engine? It sounds and rides nice.
in 75 my AMF harley davidson sportster had a Teflon tensioner on the primary chain. and my remington nylon 66 rifle had a nylon plastic bolt carrier. in the 60s. they have been using these white plastics a long time. wonder why they dont make them black like metal
is it okay to add performances parts without doing this step? like removing the governor? i really want to do this to my rascal but i’m afraid cus i’m new to this
do you remember if that black washer that we under the pin on the governor arm shaft was rubber or nylon? I am trying to help with a neighbor kids gokart. Its leaking oil out of the top where that shaft is.
Recently did the governor delete on 3hp ct100u and noticed the initial take off decreased maybe top ended increased but nothing too noticeable (never did any time runs). Now question did I do something wrong or was I expecting too much ? Sorry I’m fairly new
I have a mini bike but don’t know how to do governor bypass it’s a nz mini bike the engine looks similar but different looking governor be sick if you make a vid on the it the engine name is the (sc152f)
@@Black66 were did u get the cam? i was thinking its the same as the 79cc just metal...id have to measure the lobe hieght n duration first to compare them
There are quit a few videos on the channel with the Tillotson 212 electric start . I also swapped on a Tillotson 212 onto this bike. Check out the playlists
@@Black66 I have the 98cc on my bicycle and the 100cc kit for my daughters bicycle both 4 stroke. 212 is to much I think. we use them for beach cruisers. Not trying to go faster just have power for lighting.
i have this same gopowersports 98cc and its bogging when i give it some throttle like its a lean bog and it dies out. Any idea how i can fix this ? thanks
A long time. I have another bike that I have been running for a couple years now, Check out the micro bike playlist ruclips.net/video/DIAP9ncWEEk/видео.html
Can i ask, i see sometimes u put the cluth on, one way, and turn it around the other way? They go both way's? Cluth faceing either way? Does it turn diff,directions?
It works in either direction. It's just a centrifugal mechanism that expands out to make contact. Put it on whichever way g Lines up best to for the chain
2nd again. Mr Black 66 can you give me a pin pleas
Mr black 66 coming in clutch again
I will be ready again on your next video.
I did the same mod except the timing advance. At top speed it feels like 40mph! I know because I have two Taco 100b's they will do 45mph stock zero mods! Excellent video! Thank you for helping the mini bike community and its viewers out!
Thanks! Have you checked out the other rascal lite videos? I added a billet flywheel and cam to the 98cc ruclips.net/video/TASIlWl5K8k/видео.html
You what I'd like to see? A direct comparison between a HF 79cc and the GPS 98cc. They are rated the same but one is 20cc's more. Maybe run them on the same bike? Will a steel 79cc cam fit in a 98cc? will an aluminum 79cc fly wheel fit on a 98cc? etc
That thing would fly with a 80lb kid on it LMAO! Love it
Ordered my Rascal Lite, should be here Saturday, thanx for the heads up on that deal 66 you are Thee Man. 👊🏼
Hey I just order one how do u like it?
How fast is it stock and how can I make it faster plz. I just order on Monday
@@DiegoHernandez-pu6ps I don't know how fast a stock one is, I never used the 98cc engine, dropped a 212cc Predator in it, geared @ 12/60 it does 41 mph with the governor still in it and a 210 lb rider.
Damn that made a big difference, can’t wait to see what you come up with next.
That made a way bigger difference then i thought it would! Im still waiting for mine to get delivered, along with your brake bracket bolts lol…
I have a 98cc on my Mega Moto... Could not really find any serious aftermarket support aside from a factory cam that gets reground along with a little head work. I bet if the aftermarket support is there these little 98cc motors could hit 7-8hp @ 9000 rpm. I would seriously build one.
Be nice to see billet rods, stroker kits, big bore options etc...
You're the king of mini bike, ur a genius
cant wait to see more of this build! i have a 79cc i already took off the governor and added a slide carb. have a coleman 3.0 as well and wondering which one should stay on the mini bike for my 7 year old.
I have a lot more content on this bike coming soon!
@@Black66 can't wait!
Thanks for the video I like what you done there 👍🏻
The amount of times you pull side covers off you should get one of those vacuum oil drainers, they are awesome.
Thats why i love your channal, helps me so much❤
The ghost 212 head and Lifan 7.5 from the mega moto 212 both have "ported" heads from the factory. Would you please test the heads back to back to see if there is any performance differences?
I have tested the Ghost head against many other heads. Check out the ghost playlist ruclips.net/video/ONJbFaEecQM/видео.html
2 hours late but never absent❕
This was a video I was definitely looking up to see thanks for the good content and paying attention to your fans🤙🏻🦾
be cool to see how much just rocker arms with a higher ratio (cheap cam swap) would gain over stock, before you add a cam and stronger springs.
Check out the other 98cc videos on the channel . ruclips.net/video/TASIlWl5K8k/видео.html
I have a Mega Moto 80 with a 98cc engine, and I'm looking to remove the governor. However, I can't seem to find a flywheel that fits. It seems like billet flywheels aren't available for 98cc engines. I understand that it's recommended to replace the flywheel when removing the governor to prevent the stock flywheel from exploding at high RPMs.
79 cc predator billet fly wheel will work
Dave, was that a cast iron flywheel, or aluminum? Any chance it'll break at higher rpm?
That was the stock cast flywheel in this video. it now has a billet flywheel in other videos. Always recommend a billet flywheel if you're gonna spin the engine past the governed speed.
Nice Job...Thanks for sharing...What app are you using?
I've noticed you did put an upgraded flywheel on or a rod. I know for the 212 or larger you have to upgrade the internals (at least I did), but maybe not for this engine? It sounds and rides nice.
Throttle linkage is cool!
I'm excited abt the volts updates
I have more videos on that coming out.
in 75 my AMF harley davidson sportster had a Teflon tensioner on the primary chain. and my remington nylon 66 rifle had a nylon plastic bolt carrier. in the 60s. they have been using these white plastics a long time. wonder why they dont make them black like metal
I have the same engine, just removed the governor linkage, it’s going 42. Hopefully it won’t blow on me.
Check out the other videos in the series. I added a cam ,billet flywheel and a milled head
I am a begenner, mechanic! But always have loved it❤ 60, and off the couch🎉😊
is it okay to add performances parts without doing this step? like removing the governor? i really want to do this to my rascal but i’m afraid cus i’m new to this
Hey man quick question, how much do you weigh? And do u think I would go just as fast if I weigh 150?
do you remember if that black washer that we under the pin on the governor arm shaft was rubber or nylon? I am trying to help with a neighbor kids gokart. Its leaking oil out of the top where that shaft is.
Recently did the governor delete on 3hp ct100u and noticed the initial take off decreased maybe top ended increased but nothing too noticeable (never did any time runs). Now question did I do something wrong or was I expecting too much ? Sorry I’m fairly new
What’s the difference between the Rascal Lite and Rascal?
The lite come with the 98cc and a smaller brake. There are so many options for these bikes.Its a great starter bike to build up.
I wish I lived near black 66 I would pay him to make me a personalized bike.
I have a mini bike but don’t know how to do governor bypass it’s a nz mini bike the engine looks similar but different looking governor be sick if you make a vid on the it the engine name is the (sc152f)
kohler engines run smoothest best for walk behind mowers mini bikes also
Check out the playlist for many different brands of engines . ruclips.net/video/SaxCCoqJ0RU/видео.html
No re jet on carb? Up one size should make a noticeable difference.
More videos to come with a cam, re-jet, and billet flywheel.
the 79cc billet flywheel works on the 98cc
Video coming with an after market cam and billet flywheel.
@@Black66 were did u get the cam? i was thinking its the same as the 79cc just metal...id have to measure the lobe hieght n duration first to compare them
@@Black66 because you replied i subscribed!
Is their a way to ad a battery and electric start?? Or just power for lights? If so what parts?
There are quit a few videos on the channel with the Tillotson 212 electric start . I also swapped on a Tillotson 212 onto this bike. Check out the playlists
@@Black66 Thank you.. will do!
@@Black66 I have the 98cc on my bicycle and the 100cc kit for my daughters bicycle both 4 stroke. 212 is to much I think. we use them for beach cruisers. Not trying to go faster just have power for lighting.
@@markrsg If you only want lighting , check out the lighting videos on the channel.
i have this same gopowersports 98cc and its bogging when i give it some throttle like its a lean bog and it dies out. Any idea how i can fix this ? thanks
Hello if you can/please answer how did you cut and make that throttle linkage?
this guys is the best
What size bolts did you put in the governor holes
Not sure about the flywheel bolt, but he used quarter inch self tapping bolt.
I wonder how long a nylon cam lobe lasts.
A long time. I have another bike that I have been running for a couple years now, Check out the micro bike playlist ruclips.net/video/DIAP9ncWEEk/видео.html
Port and polish the heads and take 50 mills off of it. Might be near impossible to find a camshaft!
I know a shop that will grind the cam for me. They do cams for the 79cc
Agk makes custom cams for these. Predator 79cc engine cams fit in these as well.
@@ElijahMiniBikes Yes, that is where im getting the cam.
could i just remove the external govenor and get the same results. seems to me i did a predator 212 and just left the clip on??
Can i ask, i see sometimes u put the cluth on, one way, and turn it around the other way? They go both way's? Cluth faceing either way? Does it turn diff,directions?
It works in either direction. It's just a centrifugal mechanism that expands out to make contact. Put it on whichever way g
Lines up best to for the chain
@@rachelbradleyharris8748 thank you 😊
I have one these bikes can some send me the part for the throttle directly to the carburetor parts
What frame is that ? I like it......
Rascal. Here is the build video ruclips.net/video/8fpRk96yag4/видео.html
I just got my lil rascal lite how do you mount the seat to the frame
Check out the build video. I show it on that video
Changing the timing, how does it make it “faster” and can you do this to other engines small engines?
Just curious what the torque spec on the fly wheel was?
🤠👍 Get rid of the Governor it always slows things down
Not always.
@@Deucealive75 OK most of the time
How fast was the 98cc before taking the governor off?
35mph!
Does anyone have a link to the spark plug i need for this engine
Black 66 i really need your help i don't know what size the long gas tank bolt is, and my tank is rattling please help??😂✊️🔥✌️💚
Can this engine fit in an rb100 or rt100 model?
Mine barely hits 25 😢
How can i get my mbx10 to get more top speed running a non hemi predator 212 gov delete vm22 75 tooth rear sprocket 12 tooth clutch #35 chain ?
Also got exhausted header hitting just under 40 mph
Where do you have to live to ride this in the streets legally?
How much do you weigh?
Plastic cam is crazy that looks very unreliable
Oil spill time
how much of the speed increase do you think was the timing advance vs gov removal
I have videos on that in the micro bike playlist
Lol perfect
I have a sp170 subaru want can i do make it fast..also i dont know what frame i have ? Help