How To Program Transponder Chip key for 1998-2002 Honda Accord & 2001-2002 Civic Autel MaxiSys Elite
HTML-код
- Опубликовано: 17 мар 2019
- How To Program Transponder Chip key for 2001-2002 Honda Civic & 1998-2002 Honda Accord Using autel maxisys elite
Key Chip ID - Megamos Fixed 13
Strattec 692246
Ilco HD106PT
Bianchi BHD106PT
Hata HD106HPT
Jet HD106PHT
A-1 HD106PT
JMA TP05VHOND21P
OEM Part #
35113-SZ3-A01
35113-S6M-A00
Key Programming Process and Same Key Chip can be used for the following Vehicles as well
Acura
CL 1998-2003
Integra 2000-2001
MDX 2000-2006
NSX 1997-2005
RSX 2002-2006
RL 1996-2004
TL 1999-2003
Honda
Accord 1998-2002
Civic 2001-2002
Insight 2000-2006
Odyssey 1998-2002
Prelude 1997-2002
S2000 2000-2003 
Авто/Мото
Very helpful. Thanks
You remind me of my best friend from Lebanon. We were mechanics together many moons ago.
Helpful video 👍🏼
Glad you found it helpfull . Thanks
Was unsure if it needed to be programed but now I'm sure it does. Unfortunately now the problem is the immobilizer is having issues programing keys might have to swap it.
You will need to reprogram the key to work with the new immobilizer
Hello use blade key hon58r ?
Replacing the immobilizer module on my 2000 Accord. Can I use my old key ? I'm trying to figure out the easiest & cheapest way to go
You will need to reprogram your key to work with the new module
Where is the immo module located at
Can i use a different brand scanner?
Yes if it programs Honda keys
Hello I’m having a problem with my 99 Honda Accord I had a guy come out and he said he had programmed the new key but I still can’t turn on the car and I still have the green blinking key
Still a key problem. If the light is blinking it is still a key problem
I think 🤔 I have same problem with my car and the key 🗝️ on no longer sensitive to start the car. Honda 99 model
Hello, where is the obd port of this car? We could not find that
What year is your accord
Can't the security chip be removed from the damaged key and then transferred over to the replacement key?
How would you do that
It requires some heavy tools to dissemble the plastic around it & you’d be able to place it in another area in the new key fob
@@devaughn1994 does not require "heavy tool" all you have to do is split the plastic/rubber casing thats surrounding the key and inside that you will find the chip. once you have the chip you then place it into the new key and there ya go. i guess heavy is relative to your idea of what heavy tools are but to me, yu do not need "heavy tools"
It should i removed my chip from my ford focus key and glued the chip the ignition once i found the correct spot that it reconized it every time i turned the key, that way i could just uae a key without a chip
I think this might be the issue with my car. Sometimes it does start but sometimes it doesn't. Can I take my car/key into the dealership to have this done? My Honda Accord is old, 2001, so the key is old. Any idea of cost?
You probably need a new ecm like me
Any tips on cheaper diagnostic tool options that work with honda accord 2000 lol.... Not trying to spend 5K$
Any mechanic with similar tool should be able to scan the code for you for cheap just to find out the code and problem . if you were local I would scan it for you for FREE.
How to contact you? free headlight assembly test.
what do you need help with ?
What kind of transponder did you use?
I didn't use any transponder, I replaced the part in the video.
Miles so low give me that car 😂
Will it work with the 2008 Honda Accord?
I dont believe so
G
I don't have anykeys with a chip. I've been driving this car 2 months and it just started randomly not cranking. I have to wait 30/40 min and it'll finally crank.I don't ever get the green flashing light. Help!!!😲
Have a mechanic check the crank angle sensor or do a full diagnostic. Your issue is not key related. Hope that helps.
Where does the sacnner is coneccted to the car?
ODB port under the steering wheel
Did you have to use the jbox on this?
No
Will it work on a 2006 honda civic
If you are getting the same code most likely it will work
Did it work bro ?
Can you program a key without that expensive machine?
No
How mm li nju BLM xh bbn c um
This is not something people have laying around the house to do. Thanks for nothing
For sure...lol
Speak for yourself m8
literally a 3000$ dollar scanner, all this video did is confirm that you MUST take it to the dealership or competent shop.
@@millerrain4025 I'm in westchester ny and I have an autel im608 key programming and all system diagnostic, I'm not a shop or dealer I do it for friends and anybody nearby and I don't charge those ridiculous prices dealer or locksmith do, That's what got me into doing this when a dealer wanted almost $700 for 2 keys I said no and spent over $3000 to do my own keys so now I just do it to pis of dealers 😛😛😛😛😛 and to help people but you have to bring your own new key, I can cut and program them.
Go back and step on your skateboard that way when you misplaced or break the key you do not have to come here crying like a sinlgle mom only child about this video finding a solution to a problem.
Great video!