How To SHORTEN A LONG T-Shirt
HTML-код
- Опубликовано: 8 фев 2025
- One of the most annoying things is finding a shirt that's just straight up TOO LONG! This is especially true for shorter guys. In this video I'm going to show you how you can quickly and easily shorten a shirt at home with a sewing machine.
I got this shirt at Target on clearance like I do a lot of my shirts, but it's SUPER long. You can shorten it with keeping the factory hem, but this shirt needs to be shortened so much that we have to get rid of it. We are taking 7 inches off of this shirt!
The first thing you want to do is iron it down so that it's nice and flat. Next, measure and put a pin one inch from the bottom of your shirt. You're going to put one straight stitch across the bottom, and then a second one right below it a quarter of an inch down.
What was good about this video is there were some problems and mistakes that I made. I didn't properly check my stitch tension, so I ended up with some skipped stitches that made my shirt look bad. These things can happen to you, so make sure you check your settings! All in all, mistakes happen and you're going to mess up. We are all human. Practice and practice some more, and you will MASTER IT!
BTW, to anyone reading this, you guys leave me some awesome comments and send me cool messages on IG and I just wanted to say thank you. As random as it sounds most of the time it puts a smile on my face and makes me feel good, so thank you!
---------------------------------------------------------------------------------------------------------
🔴 Beginner's course and DIY tailoring tutorials 🔴
stylishdtailor...
📣 Say THANK YOU with a donation, it's greatly appreciated! 📣
ko-fi.com/styl...
Twitter - @Stylishdtailors
Insta - @Stylishdtailors
🔴 Business inquires ONLY 🔴
Business@Stylishdtailors.com
---------------------------------------------------------------------------------------------------------
DISCLAIMER: As an Amazon Associate I earn from qualifying purchases
👊🏾GREAT All Around Beginners Sewing Machine - amzn.to/3WF2mIG
👊🏾DIY Hand Sewing Kit - amzn.to/3fGx39G
---------------------------------------------------------------------------------------------------------
Brush patterns and shapes were provided by www.brusheezy.com
Stick around until the end of the video because you're gonna learn a valuable lesson, check your sewing machine settings. No ones perfect, you're gonna mess up a lot of clothes, and mistakes are gonna happen. That's life, might as well get used to it huh? Only thing you can do is learn and move on, like everything else in life.
Thanks for subscribing and don't forget to share this on your *SEWCIAL MEDIA!* I crack myself up sometimes...
ruclips.net/video/dxHedIOsf7g/видео.html - 🔴 How To Taper Jeans (EVERY STEP 2 Minutes) 🔴
ruclips.net/video/T6nRUr_YzUM/видео.html - 🔴 Sweatpants To Slim Fit Joggers (EASY) 🔴
Stylish Dad super dope channel are you on ig love to connect possibly villain on a video. Dm me on IG tshirtsidehustle
@astylishdad
I’ve been really down lately while being stuck in a crappy job and a crappy state while not being able to pursue my actual goals all while my 20s have passed by without any real accomplishments. Then I heard what you said at the end of the video and realized that all things considered I should stop staring morosely out the window at my current situation and get my head back into the game
Great video; thank you
Sorry for your losses. Subscribed and loved how you make video
I'm so sorry to hear about your mother and your daughter's mother. I can't imagine your pain. Thank you for providing such upbeat, interesting, and easy-to-follow tutorials. You're an inspiration, and your daughter is incredibly lucky to have a father like you.
You broke my damn heart at the end of this one, man. I'm sorry to hear about your losses. They're all with us in memory.
Thank you for sharing your knowledge with all of us!
You need to get yourself a magnetic seam guide! Makes sewing straight lines so much easier. $4.99. And, raise your table with bed risers $10 or so. Much easier on your back and easier to see your stitching. Love your videos, motivating me to alter my tees.
if you have a couple steel plates and some magnets you dont even have to order it
I have no real experience sewing but the whole time watching I was thinking Wonder if they make a plate guide cause I am not going to be about to hold that line. THANK YOU! PS. Can you explain why removing more than 3 inches you CAN'T keep the original hem? if the shirt is a true tube and precisely the same width would that be the exception?
Your comment about not having your mom to ask questions and using her machine really struck a chord with me. My mom passed earlier this year, and I've been teaching myself to sew in honor of my mom. She created many pieces of clothing, pillows, quilting, biker pajamas for me, etc. I was so proud of myself for recently fixing a broken patio umbrella rod pocket seam the other day. Finesse didn't matter since no one would see it, but i got it done on my mom's old sewing machine! Thanks for your videos (and Patriotism), I'm looking forward to tailoring some of my potato sack t-shirts.
Ahh man I'm so sorry for your loss, you're only a few months out so I totally know how you feel. It's such a hard place to be in, but coming from someone who didn't think it would get better let me tell you, it does. She's watching you and is proud that you're putting that machine to good use!
Thank you so much for your channel. I tell all my friends about you. I am an elderly grandmother who makes quilts. BUT never figured out tailoring. I ran across your videos and voila! I tell my friends your videos are so easy to follow. I love how you break it down into super basic steps that even non-sewers can follow.
I also love your philosophy that the inside doesn't have to look professional (my prior hangup) as long as the outside does! That has made a radical shift in my thinking. I have lost ALOT of weight and am now pulling out some of my favorites from 1-2 sizes ago, not ready for the 3-4 sizes ago yet and making them fit! Yea! Thank you so much.
This old lady has learned so much from you, I'm passing the word to other grannies who just do basic pattern sewing like me and are afraid to tailor.
You are not just speaking to men, (but that is what makes you great and sets you apart from others on youtube, I chuckle at your comments for guys so don't stop!). The best part is your assumption that your viewer doesn't even know what a pinking sheer is! That makes your videos the easiest to follow directions on youtube, when it comes to tailoring.
My husband is very involved in a ministry to released prisoners who have no where to go and no money. They have housing for them and a guaranteed job at a factory. I go to bargain bin (basically amazon returns) stores and buy NEW, NICE mens clothes in multiple sizes. I have recently told the director to have them watch your videos so they can tailor the items they like to fit. Don't know if they have done it or not, probably need to find a machine for them. But I am encouraging them to try and do it, all because of you!
Hey there, just want to let you know that I appreciate what you are doing, and everything from your advice on sewing to your more personal videos seem genuine and really carry weight. Appreciate what you are doing, keep it real man.
Hey thank you so much! I watch a lot of RUclips and one thing I hate watching are people that seem fake or like they're trying to be someone they aren't. Super frustrating...
@@StylishDTailors Well said. We can, see right through that nonsense. Thanks for keeping it real.
I just found your channel yesterday and watched a bunch. I borrowed my mom's sweing machine and tailored my first ever shirt all by myself. I get the point of messing up clothes, the part I struggled the most was shortening the length of the shirt.
I love your realness! Its so inspirational. And that you aren't afraid to show your mistakes and embrace them! Most tailor channels strive for perfection....but they miss the human element! You nailed it!
Thank you so much!!
I recommend using a twin needle for stretch fabrics if you don’t have a serger. It will space the two straight stitches perfectly and the back side will be a zig zag so the seam will stretch with the fabric so no more wavy nonsense
YES twin needles are so much easier then sewing 2 lines 1/8" apart!
@@toodlerue New to this thing called sewing...what is this wizardry of twin needles? Eureka this could help this newbie greatly! THANKS!
@@b.walker5955 Twin needles use 2 different spools of thread threaded through the machine together & then into a twin needle (2 needles on one shank). It makes parallel stitches that are evenly spaced with a zigzag on the underside. Perfect for hemming knits!
@@toodlerue Oh THANK YOU! I can see and understand fully after watching the video the difference. In this tshirt I have before me, that twin needle is more likely how this hem was formed. Is has that zig zaggity thing under neath and on top the dual stitches are synced and calming my ocd. No offense to our host, but his technique has me shaking and quivering. I was wondering how the stitches could mirror one another with a single needle the answer is they can't. Do keep in mind, I have no idea how to turn on a sewing machine, how to load or wind a bobbin, nor what thread to use ... so he is leaps and bounds beyond me and my "expertise". But I am twin spin all the way, when I do learn. thanks again!
Dude!!! I just tailored my suit!!! It fits!!! Thank you!!! Thank you so much!!! It was very frustrating, but that’s the process of learning.
Dude you have no idea how awesome that is to hear!! Will you shoot me a message on IG? I have a few questions for you. Now that I think about it I think that was you and I talking on Facebook, and if it was then FB works too!
Stylish Dad no, it wasn’t me on FB. Lol
I been sewing for years and still make all the mistakes you listed I was not even aware of that sewing line on the machine . I would have washed it before seeing just to get the shrinkage . Not for nothing but I learned a lot. You earned a sub.
Yep, we all make mistakes. I didn't wash it because it was a practice shirt for this tutorial but you're right I should have mentioned that.
Thanks for this great video. I used it to shorten three t-shirts. They came out fine. I like that your videos stick to the key points, present the info in sequence and clearly - without distracting irrelevant bits.
Thank you so much for this! I'm a 5'5 manlet so you know it's gonna come in handy.
You're welcome bro!
Right there with you my dude. Gonna be referencing this video a lot over the next week!
I think you mean that you're a 5'5" KING.
@@Kindhamster KING
I’m 5,3
You are so refreshing! I love that you show your mistakes, it really helps me understand when things go wrong....thank you for being real
Thanks! Yeah mistakes can and will happen. It's important to know beforehand.
Wow! An informative video on tailoring as well as solid life advice. I’m glad to see you persevere and share your knowledge and positivity online.
I hope for your continued success!
yo I love the way this dude included a little lesson on life towards the end and even let us see his mistakes to get his point across. reminds me of that quote, "it's entirely possible to make no mistakes and still lose. that's not weakness, that's life"
Aye I just found this channel and I have to say you are the man. Thanks for this and sorry about the moms
Bro keep up your great work!!! I started to stitch half a year ago and found today your videos. You seem like a great guy and thanks for all your tutorials!!
How to shorten a shirt *RUB TIEGE HANLEY ON IT*
Oh wait wrong channel
Lol! "Gentlemen!---oh my bad..."
Stylish Dad 😂😂😂
WOW. Your journey sounds like mine. Only my kid wanted to sew and I grabbed my Mom's sewing machine as my siblings didn't want it. Now I'm sewing and the kid is on to something else. Lol. I've made hats that turned out pretty good. Now I'm gonna try to fix shirts that have always bugged me in the way they fit. You and I look the same in every way so your info is very helpful. Have you done a video on making a button up shirt shorter? Mine are always too long and going untucked never works well for me. Lemme know. Great vids. Thx again
I found this chanel all randomly like 3days ago, i cant stop watching your videos,great job, amazing anergy! U got a fan here!
Thanks Romeo, glad to have you here!
First video I watched of yours and I’m already loving your energy haha, oh almost forgot to thank you for the video....THANK YOU 👌🏻🔥
No thank you! I appreciate the awesome comment!
Okay,, your videos and style are so good I must, subscribe now! Boop! Keep up the great work.
Just subscribed to your channel because as a petite short woman I have to shorten everything. I was getting ready to use a good fitting pair of pants to use as a template then I found your channel. 😜
One of my brothers sews as does my son who would literally even take in his jeans and leather jackets as a teen...he sews better than I do on the machine... :) This was such a joy to watch after a trying day...Thank you....
Hope your day is better tomorrow!
Stylish D love from India my brother 🇮🇳 I totally relate to what you said... We have nothing in our hands we just need to buckle up and be humble and move on with our lives no matter what life throws at us🔥!
You’re channel is super!
You’re have a great voice and wonderful personality, you make me laugh.
I now know how to fix my hubby’s shirts and pants thanks to you. 👍🏽🙏🏼
I love the way you explain things. It makes it so easy! Thank you!
Thank you for watching!
Love your attitude! Great tutorials.
Thanks! This method worked perfectly!
Glad it helped!
You are TERIFFIC!! I love your style and your energy. Your lessons are spot on and I am learning a ton from your honest tutorials, mistakes happen and we all have to keep going. I'm sorry for your losses. Stay strong and keep giving us these wonderful lessons. I hit the subscribe almost immediately.
This is just what I was thinking, love ya SD! Thanks
You're welcome bro, have a good day!
Thank you so much for your time and precision. This is a great video as I am learning from you ! So much appreciation !!
I have to buy xxl here in UK 'cause I'm stocky .(would be xl in US) This is why I've learnt to sew over the years. Same goes for tapering trousers. So thanks for the tip. Basic sewing has saved me money for a good fit.
hey Stylish D! thanks for this! I have a shirt that i really want to look good on me and this video is exactly what I needed. I don't know the first thing about sewing until this video so I'm a little scared, but i'm more scared of forever having the shirts i like look wack on me.
Great video! I would absolutely change your needle from and all purpose to a ball point when you’re working with knots or stretch fabric. 🥰
I never thought I would be watching a funny guy teach me how to hem a t shirt. But here we are, and I really enjoyed you!!
Lol! Funny how that works huh?
I lost my father when I was 8, my first child 33 years ago when she was 7 months of age and my mother at 96 a few years ago....I am truly sorry for the loss you and your daughter had to endure as well. One can clearly see how you are surely such an inspiration and joy to her and those of us who have just discovered you... Thank you...
Thank you for the comment and I'm sorry for your loss :(. As you know it doesn't get easier you just get more used to it...
Have you ever done a double-needle stitch for this purpose? If so did it work? I saw amazon selling double needles and discovered they work in most sewing machines.
No but it would make it a thousand times easier!!
@@StylishDTailors I just got some in the mail today, I'm about to try them out, hoping I don't break them!
Love your attitude, man. Great stuff!
Thanks for the video, I actually enjoyed a sewing video. TBH, I didn’t expect that!
Crazy isn't it?
Sd, you are the best dude. You are very genuine. God bless you.
Thanks for the awesome comment, I appreciate the kind words!
Ok, so you need to use a stretch stitch for tee shirts, otherwise the thread will eventually break from just putting it on and taking it off. Pull on the original hems of any of your tee shirts, in the direction of the stitch. Then, in the same way, pull on one that you've sewn without a stretch stitch, and you'll see what I mean.
Also, there are double needles for your machine that do that stitch a quarter inch apart in one pass. They can be a pain, though.
There's also a quarter inch double-sided tape for hemming called "Dritz Wonder Tape". It goes inside the fold of the seam and adheres the fabric together. It really helps to keep the hem in place, and it prevents the fabric from stretching while you're sewing. The tape is not permanent--the adhesive dissolves when you launder your shirt.
Finally, a walking foot, instead of a regular presser foot, really helps to advance the top fabric of the hem at the same rate as the lower fabric during sewing.
So you see, hemming a tee shirt properly isn't exactly an easy prospect if you don't have some experience sewing.
Keep practising, though. That's what sewing is all about. Good luck.
Thanks for sharing your tips! I sort of agree with you on the stretch needle, but I've sewed dozens of tees with a regular universal needle and haven't had any issues with blown seams or anything like that at all. You obviously want to be careful taking it off and putting it on, but that goes without saying. I also know there are double needles and special presser feet that make jobs like this easier. I like to make my videos for the guy who wants to buy the minimal amount of accessories to go with his machine. Would a double needle make this easier? Absolutely, but it isn't NEEDED though either.
One thing I definitely agree with is the fact that yes, sewing gets easier with practice. It's taken me years to get everything down, and as you know mistakes can still happen, but it's life.
@@StylishDTailors Stretch stitch, SD, not stretch needle. It's an adjustment on your sewing machine. So, you can make a regular straight stitch a stretch stitch by just turning the dial on your machine. Make sure you do some practice stitches on the scrap tee shirt fabric that you've cut off, so that you can see if the stitch length and thread tension are ok.
Really sorry about your mom and daughter's mom. I lost my mom and my daughter. I know the pain of loss. With that said, I love your sense your humor and you make sewing more interesting! And no offense, but I haven't seen a man use a sewing machine... like... never!! lmao!! you're awesome!
I'm so sorry for YOUR loss! That has to be the worst...I hate when people say things like that because it's like "yeah it is...thanks for reminding me..."
I appreciate the kind words, and thank you! I try to take something that most people think is boring and make it enjoyable!
Love your attitude. Keep the videos coming.
Obrigado pelas dicas, cara.
I wish I knew how to use a sewing machine. As a slim guy, I am sick of shirts off the rack having way too much fabric with my correct size. I am not into the blousey look. Even "slim fit" shirts usually still have too much. having all my shirts tailored gets too expensive. I wish also manufacturers made shirts with waist sizes, just like pants.
Curt Randall it’s surprisingly easy if you have a good machine. Try the Singer Stylist 7258, toooons of different stitch settings and veeeery user friendly. I’m kind of trying to figure it out on my own and let mistakes happen so I am really learn and see what’s wrong, my first mistake, not ironing before, I was wondering why it came out wonky and wasn’t flat enough. 😬
Go for it Curt! There are so many fine videos on youtube, and as there are no explosives (just a hot iron) involved, what can go wrong? (Just keep an eye on where you put your finger!)
Am I the only one who loves when he says “ stupid”!!!! 😂😂😂😂😂
Nope, I do too :)
That was fun to watch. Thanks for your help. I'm 4'11 and ALL my t-shirts are too long. What tension should I put my machine on? I have an old Singer with no fancy stuff on it. It was my grandmothers :)
Have you tried laying masking tape on the fabric at the 1” and then sewing right next to it to keep a straight sewing line?
No but that's a brilliant idea
SD pick up a 6 mm twin needle and do both stitch lines at the same time. I have recently shortened some t shirts and used a 4 mm, it was a bit close. HTH.
Thought about it, but I like to teach from a perspective of using what you already have, then adding accessories later as you need them and learn and get better. Twin needles DEFINITELY make it easier though.
Would love to see a video on how to tailor french cuff sleeves!
The multi-cam setup is really helpful!
Thanks! Put my cellphone to use lol.
Agreed!!
Great video, great explanation on the philosophy on life as well.
Wow, first training video that actually shows how not to do something. Thanks!
Lol right??
I know this videos a year old but I’m really sorry for your losses man. This is the only video of yours that i have watched so I don’t really know who you are but I hope that you are holding up well, especially with what’s happened this year, I seriously mean it. Thank you for the help
Regardless of how old this video is I truly appreciate you taking the time to leave this comment, thank you!
Hi SD!
Loved your stitching videos and I became a big fan and started to watch ALL of them. However, I got two questions that were not answered by watching your videos. Or it could be: you have, but I just missed them. 1, How to downsize T-shirt shoulder to make them fit? 2. How to downsize Jean’s waist? Thank you! Keep the good work.
Hello there! Thank you for the comment! Shoulders are hard...like not worth it hard.
But resizing jeans is coming soon!
My mom passed 5 yrs ago from cancer when I use her old singer sewing machine, I can hear her giggling as I am horrible and she could sew. she made my wedding dress . My deepest sympathies for the loss of your mom. And your daughters mom.
Aww, I'm so sorry to hear about your loss as well, but when you said you can still hear her giggling honestly warmed my heart!
Hey SD sorry to hear about your mother and wife.
I do enjoy your channel so keep it coming
Thanks Michael!
Subscriber # 59,915! Keep it up. That whole mom and wife thing really f’ed me up but ur attitude of perseverance is infectious! Thank u and keep doin u bro! Tony
Boom!
Another great video! Thanks
Glad you enjoyed it!
This isn't even really what I was looking for but you good sir are hilarious. I am subscribed lol
You have probably shared this in other videos but I’m new to your channel 😊 Who taught you your awesome skills or how did you get started sewing?!!
I just taught myself actually! A lot of trial and error really!
this is dope! Been binging since i found your channel. Id love to see a video shortening a shirt but keeping that U shape at the bottom. This shirt had a cool shape to the bottom and id love to see how you can make that shape on a shirt. Hope that made sense lol
Coming soon Jordan! We're gonna shorten a dress shirt that has a U shape!
Thanks so much for this video!
Hey, man... another great video! I sense that doing this channel is a sort of therapy/meditation for you? Keep up the good work. Just a matter of time before this channel explodes!! (No doubt in my mind.)
P.S. LOL'd at the Ellen joke.
Thanks! And yes, this is very therapeutic and has helped me SO MUCH though so many rough spots in life.
@@StylishDTailors Time and pressure is how they make diamonds. Keep it up!!
Dude...I'm totally using that, thank you!!
Thanks so much for this. It is the first really useful method I've seen. I would like to know though, what exactly would you have done to the tension? By how much would you loosen it?
Definitely juggle around with the tension and see what works best for your garment.
You have a great sense of humor! :)
Thank you!
My new favourite channel! I got a problem though... I watched the hoodie video, and i was planning to fix an anorak with a waterproof zipper from the bottom of the anorak to the armpit on the right side of it. Its made out of ventile cotton and i really do not want to mess it up.. You think its possbible to reattach the zipper after i made the anorak slimmer? It should be as easy as an hoodie other than that zipper on the side of it
Hmm, I would say yes but do you wanna shoot me a pic of it on IG?
@@StylishDTailors I decided not to do anything with it, its to risky and expensive haha, thx anyway! :)
Dude you're hilarious, thanks for making me wanna take up sewing
Use twin needles and you only have to sew around once. Great video.
Agree. They are designed for making stretchy hems. Any machine that boasts a zigzag stitch can handle them;
First time the RUclips recommendations worked !!
Great work Bro !
What a great video. You have a new subscriber!!
do you have to do a zig-zag stitch on the inside when you are done??
Yes
S. D. Your inspiring! Keep it up and thank you.
How to easily shorten a long t-shirt:
Put in wash, wash on high heat
Aaaaaand that's why I don't make videos
Lol!
Won't they go back to original after ironing them?
Won't what go back to normal the new hem? No because you're making it permanent by sewing it in.
That's shrinking not shortening
@@schplergen6630 thats shortening by shrinking actually
can you make a video bout shorten sleeves and smallen the width of a sleeve?
Yep, coming soon!
Sorry for your loss :(
And thanks for explaining things like I'm 5 lol. Honestly that helps.
Just curious though... does the shirt need to be turned inside out? Or did I miss that part?
Thanks!
And yes turn the shirt inside out first
Actually SD you shouldn't treat your garments before you sew if you value your machines. Starch and other chemicals will be pushed into your machine with your needles. Same principle as hemming jeans with dirt in the hem. It builds up.
You can press before you sew if you want but putting pins in and hemming it and then pressing it is just as good. A lot of times the edge you press rolls and your hem is a little off. And I've taken up original hems as long as 14 inches. It works. Like your vids. 😊
I need someone like you in my life
Realize I am commenting 3 years after you left yours...but are YOU saying you can keep the original TSHIRT hem if longer than 3 inches? I have over 40 tshirts I need to do for my husband. They are all a good weight 6, 8 or 10 ounce pima cotton. And 4 to 7" too long. Really want that factory hem as I am just learning. Most of his Tshirts are the TUBE style. No side seams. Any advice, much appreciated. Thank you!
@@b.walker5955 Yes you can do the original hem on t shirts any length
First measure how much you want to shorten it.
Divide that measure in half. As in if the total you want to shorten it is 4” you’re going to use 2”
Turn it inside out and make a fold 2” NOT including the original hem. It should be about 1”
Pin your hem to the fold making sure your total being folded up isn’t more than 3” because you need 2” folded
Sew a seam very close to the original stitches but not on them about an 1/8 of an inch
Then trim off your 2” folded fabric to about 1/4 inch
Press down your new hem with your excess all pressed up
Now sew a seam on top 1/8 inch away from your seam
You will have 3 seams showing the two original and your new top stitch but if you match it close to the color it kinda goes away
Hope I gave good instructions 😊😊😊
It’s the same principle as in original Jean hems
I saw the hoodie video and I thought it was a one time subject. For my surprise you're a tailor master.
I wouldn't say "master'...More like 1 step above a novice haha
I like the new video format!
Thank you! It was more experimental than anything.
If you use a straight stitch surely it won't stretch enough and can easily break when you take the tshirt off?
Nope it's solid
@@StylishDTailors Thanks for your reply, I tried it and that's what happened to me with my straight stitch. Around my waist, the back stitch didn't stretch and when broke taking it off haha 🤦♂️ Maybe need to try some different tensions.
What kind of thread did you use?
@@StylishDTailors I bought some polyester thread, has a little bit of stretch in it but not much. Might try nylon next to compare.
“This shirt is too long” has a shirt the same length on lmao
Great sharing
Thank you!
You’re welcome, watch the updated version for an actual video!
@@StylishDTailors, thank you but somehow I did see the video. Love your way of explaining this hem and your wonderful attitude toward loss and moving on. You DO sound like the best dad, keep it up!
So what number should the tension be on for tshirts?
I would go for around 3-5 depending on the type of t-shirt (I.e. stretchy or not).
I notice you sew the seams with the shirt inside out or on what they call the “wrong side.” That would put the bobbin thread on the outside of the shirt. I guess it doesn’t matter if you use the same thread on the bobbin. I was taught that if you are doing a visible stitch it should be done on the fabric’s “right side.” Does it really matter?
Doesn't matter really, but I would strongly suggest sewing on the inside for sure
I’m new to sewing and have been doing mostly plain seams where the stitching isn’t visible from the “right side.” Since it isn’t visible, I’m lazy and don’t change my bobbin to match the threads. Time to take it to the next level. You’ve inspired me.
Hi SD.
Thanks for creating all these vids.
Would you consider making a video that shortens a polo? but these polos have that "v" shaped notch on the sides?
Lol, bought a polo for that exact reason, coming soon!
You may never see this but I have to make a hoodie shorter and I would be soooo appreciative if u could do a video on that.
Why wouldn't I see it? Shoot me a DM on IG @astylishdad.
Hey, no Haters here? So far so good!
wow, great channel, you are amazing
Just the video I needed! But I think I'm gonna buy a lot of practice shirts because this looks scary 😂
Definitely practice!
Paul Hudson Bargain practice clothes from Goodwill FTW! Just saying’
Hahaha, you crack me up!!! Love this kind of wholesome content.
Informative and entertaining.
When you finally started sewing did you remove all the pins first ? I didn't see you removing pins as you sewed. I tried sewing with all the pins still in but there were always pins under the material that also had to be removed as I sewed.
Yes, you remove the pins as you go along instead of sewing over them,
@@StylishDTailors Thanks man, I tailored my first tee yesterday following your video and even took shoulder pads out of a blazer and sewed it back up lol. This is fun!
At a boy! Fun and ADDICTING!
Umm... Yeah, your a good guy. Keep up tje good work and Great video also.
Wow this is awesome! I just found your channel today!
Welcome to the fam!
Thank you for this!!!!!!
SD just wanna ask, have you ever tried tailoring stretch fabric like spandex? Think I can source moisture wicking shirts for cheap, but their all off size😂 TIA
Definitely, I'm going to release a video on tailoring a jacket, then deep dive into jean alterations, then I wanted to touch on tailoring work out clothes as there is an art to it for sure.
@@StylishDTailors ikr. I compared the stitching w/ my tech fits. The cheap ones were like regular straight stitch and comes loose real easy. Be looking forward to that. TIA👍👍👍