Это видео недоступно.
Сожалеем об этом.
Samsung Tab A7 SM-T500 T505 Charger Port Replacement
HTML-код
- Опубликовано: 11 дек 2022
- In this video I'm doing a charger port replacement on a Samsung Galaxy Tab A7 SM-T505
Do be very careful getting the screen out!, even if you dont damage the glass you might damage the oled display under it
================================================
================================================
Tools that i use frequently that are Ali-express Affiliate linked
Sunshine S-918E Heatpad: s.click.aliexp...
Previously i had a CPB Heatpad, but that died late 2022, so i am now using
The Sunshine S-918E
B7000 Frame Adhesvie: s.click.aliexp...
my go to glue for almost everything now days!
Thin Metal Pry Tool: s.click.aliexp...
Used to open ipad and remove glued back covers on phones
Heat Resistant Tape: s.click.aliexpr...
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpr...
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpr...
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpr...
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexp...
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexp...
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexp...
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexp...
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexp...
The Black Tweezers i use in my videos
Large Metal Pry Tool: s.click.aliexpr...
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpr...
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexp...
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpr...
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools are out is:
Wozniak Store: s.click.aliexpr...
Great video, thanks. Saved myself a solid $100 doing it myself. Wasn't that hard and I'm a novice. Ended up using a heat gun to softnen the glue around the screen. And used a scalpel type tool instead of that flimsy alfoil thing. And no need to use any of that liquid you had. Talk about overkill
Its not overkill. It's about efficiency. They got more devices awaiting to be repair, so less time needed if doing it efficiently. For diy user, of course its overkill to buy those equipment
Dear fellow human. Thank you for this video. I've purchased a heating pad and a replacement port for less than repair place wanted for labor alone. My 5 year old can have his tablet back. All fixed. Thank you!
Glad it helped
This video was helpful but also cost me $50. When he cut across the top it killed the screen. I'm sure thats why the video did not show the tablet turned back on. I did the same only slightly cutting into that area, but it disabled the screen. Was able to get a new screen and tablet and charging port works. Be very gentle when going across the short width of the screen.
U always have to be gentle, don't blame the movie if u can't repair or leave it to the professionals.
@a.j.r6275 Will thank you, captain obvious I was very gentle. But at no point does it suggest not using a tool up there. And at no point does it show the screen working after putting back together. I had to do this on another tablet for my other kid, this time I used no tools in that area and had 100% success. My comment is not to complain, but rather to help other youtubers be successful... without having to find out the hard way. It doesn't matter how gentle you are. You will most likely slice into the ribbon cable if you put any tool into that area. It's not blame, it's help.
You were obviously being too rough. This is delicate electrical components. I'm a beginner and successfully achieved the transplant by being careful and patient.
I really wasn't. Why are you upset with my advice to help others from making the same mistake? Like I said I kept that in mind on the 2nd one and no issues. My advice is helping others.
Thank you for the heads up. I'm worried I'm gonna break it.
I uswe this video to change my port. Very easy
Only problem is now, i have these lines going from charging port to top of screen
My last comment was deleted, because,
although I was polite, I mentioned, this video cost me $50 buying a new screen on Amazon,
because you can not put a tool across the inside top, and have your screen live.
So I mentioned this video should be redone.
Sorry to hear you have damaged your screen during the swap
I wouldn't recommend leaving any tools on the device you are working on
@@rickstechrepairs no tools were left on the device. Rather, as @mrhook mentioned, hidden, inside the device, at the top, there is something you must not poke in more than 2mm with an opening tool, during the opening process, or else it destroys the screen. This video should help; it mentions not going in more than 3mm: ruclips.net/video/hI_1sffXMI8/видео.html
Great video. Tjanx for the help
Cheers
Thank you , it helped
Glad it helped
thank you for this vid.
Your welcome
What if you didn't disconnect the battery for replacing the charging port?
risk of frying the display or mainboard
@@rickstechrepairs I could hear it the noise it makes when you plug it in but nothing on the screen😮💨
Is a kit available?
No idea
هذه الشاشة اصلا فتحت بسهولة
Do you need a heating pad? I have a back heating pad I hope it works. 😂
Heating pad is convenience. You can also use heat gun
How about I just send it to you
if you are in Australia that could be arranged
I also made that regretful mistake 😢
bugger
..
...