Well done, Tamiya. Well done! The Hornet was my first ever serious RC car and this is a proper update. I love how you kept the classic look but did an outstanding job updating the suspension. Cars like this will get me back into the hobby!
I guess we wait for pricing on this? They missed the boat on this being what everyone was waiting for imo. I have a grasshopper that I've converted using 3D printed parts. I don't see society spending a lot for something we already have had for a few years now. The front design is straight out of the free website imo.
I just picked uo the candy green Grasshopper at Suoer Rajikon on a work trip plus a ton of hop ups for multiple cars and buggies. I wish this was out when I was there I will now have to wait to its available where I live as it needs to be added to the collection.
I would have felt better about this update if the rear suspension were trailing arms, not unlike the Falcon. It would preserve the diversity of design Tamiya was/is known for. The Trailing arms would not change but be an enhancement over the OG Hornet's SLA. I mean, how many Tamiya Buggies have double wish bone Rear suspensions already?
@@CraigOverend Does not look like it. Not without significant modification. Frankly, I would LOVE if someone reissued the old MRC buggies. The Pro-110, Pro-110 Stage two and the Pro-410 Shotgun. Also, from what I gathered, the Pro-110 and Pro-110 stage 2 could have their transmissions reversed from rear to rear mid motor placement. No mods. Just a screwdriver.
@@DocWolph It looks like a DT-03 gearbox is used which has a symmetric bolt pattern like the Pro-110, so it could be reversed with some grinding for the offset bulge. Might require a lot of grinding and custom fabrication. :)
Do you remember: The rear suspension of the Falcon has short travel, but the dogbones fall out very often. That is very bad design. Its worse than the Striker suspension.
Ha oui comme ça il n'a plus rien à voir avec une Nikko Thunder Bolt F10 ou une Traxxas The Cat :) / Oh yes, like that it has nothing more to do with a Nikko Thunder Bolt F10 or a Traxxas The Cat :)
小学生の頃ファミコンが流行る中ラジコンが欲しくてお年玉を貯めてホーネットを買いました。ホーネットEVO良いですね。
Well done, Tamiya. Well done! The Hornet was my first ever serious RC car and this is a proper update. I love how you kept the classic look but did an outstanding job updating the suspension. Cars like this will get me back into the hobby!
これは欲しすぎる。
Me too!
I have been waiting for 40 years for this one!!!!
Me too!
厳しいと思いますが、求めやすいお値段で発売されると良いなぁ😅などと思います。こりゃ、RCおかえりなさい組がまた増えますなぁ。(笑)嬉しい限りです。
小学生のころ技術がなくて改造できずにがっかりしていたサスが全部盛りになってる!!!
Great update! 🙌❤️😊
Wow I love this new Hornet ❤💯🔥
昔タミヤRCカーグランプリでお便りのコーナーでホーネットにダブルウィッシュボーンサスに改造出来ないか?と言うのがあって当時は滝博士も難しい!と言ってましたが。現在の技術になると現実的になったのが凄いですね!
ホーネットが愛されるのはとにかく組み立てや走りが楽しいがあると思います!
ホーネットエボが出たら買います!
🎉タミヤの開発部の皆さんありがとうございます!!ついに純正4独の発売ですね✨
Oh yeah, looking forward to this.
Awesome !! Cannot wait to get this
ダブルウィッシュボーンになっても外観がほぼそのままってところが良いですね!
BBXと迷います・・・
LOVE IT!
間違い無く買います。
AWESOME 👏 😮
😱 O my It's not HOPPING!!! Beauty! 👍👍
It's nice but showing £195 here that's a lot of a upgraded Hornet.
What do you think! I'd say 2025 SPEED RUN!!!!
Love it!can’t wait to get one or 2..
Awesome, very nice revisions. Looking forward to a falcon Evo 😊
The Falcon Evo would be similar to no. 58401 Neo Falcon DT-02.
何だろ cc01のバギーver みたいで面白いな!
小学生の頃、私がマイティフロッグを買って友達がホーネット買ってた、
で一緒に走らせてたらホーネットの方が断然速いし満充電の走行距離も長いんですよね・・・
そりゃそうだ、同じバッテリーとモーターなのに無駄に車重の重いマイティフロッグよりも
ホーネットの方が早いに決まってるやん・・・
子供心にショックだったなぁ・・・
私は、マイティフロッグの後にホーネットも買いましたが、
まっすぐは、ホーネットの方がやはり断然早かったです!
とにかくデフなど駆動系のロスが少なく、ベアリングなしでも、
片方のタイヤを回すと、反対側のタイヤが何の抵抗もなく
くるくる回るんですね。そりゃ早いわと思いました!
これは……スーパードラゴンボディを乗せるしかないっ!
シャーシ、ボディは変更無し、
リアギアボックス周りは流用部品が多そうですので、比較的リーズナブルになるかな?
早くでないかな~楽しみすぎる!!
I will buy this.
ミッションはDT02系?ホーネットはスタートダッシュでアクセル握るとモーターの反トルクでミッションが「ガコッ」って持ち上がってスタートが遅れてた。正当進化したおかげでスタートダッシュ決められるようになりましたね!あと走行中に跳ねてないw車高が低くて路面によく当たってたけど、ミッションが変わることで車高が上がってロードクリアランスも確保されるようになってますね。リリースを楽しみにしてます。
噂のホーネットEVOですね😊
とあるメンバーになってるRUclipsrの動画から知りました😊
店員さんも知りませんでしたよ😁
A machine to rival the superfly
I guess we wait for pricing on this? They missed the boat on this being what everyone was waiting for imo. I have a grasshopper that I've converted using 3D printed parts. I don't see society spending a lot for something we already have had for a few years now. The front design is straight out of the free website imo.
ノーマルのホーネットをぼろぼろになるまで走らせてまだ保管してあります。
買ったのはXBの方でスポチュンモーターとフルベア仕様で足回りを改造しようか
悩んでいてそのままにしてありましたがEvoが出るんじゃ買うしかないかな(笑)
Nice, but I just bought GrassHopper😂
Yep.. My Grashopper 2 is still in the box.😓
@@helixworld 😥
Well done, out of the ordinary. Spoiling the Tamiya fans out there 👍🏻
My Hornet has an Arrma Mega 15T in it. This will put that power down much more effectively with the suspension update
昭和のオッサンホイホイだよね。
日曜の朝にタミヤRCカーグランプリ見てた世代にはたまらないわ
Its going to be interesting to see how many Evos make it trackside. And how the Hornet crowd take to the new chassis.
I just picked uo the candy green Grasshopper at Suoer Rajikon on a work trip plus a ton of hop ups for multiple cars and buggies. I wish this was out when I was there I will now have to wait to its available where I live as it needs to be added to the collection.
買うよ!! 4台分買うからドラゴン系のボディーを再販してください。
お願いします!!
買うしかない!
グラホのボディも買っておこう!
これで魔改造文化が落ち着くかな。
The 3D print guys will need to go to next level-up to compete with this version!
When will it be available to buy?
変に大径タイヤにしてないところが良い。特にイジらず、このままで十分と思える仕様ですね。(ターンバックルルは無しで良いので安くして)
Hope they do the grasshopper I know u can probably put the body on it
make it RTR and KIT both with ball bearings included.
It says it comes with full ball bearings at 0m40s
@@CraigOverend thats good to hear, thanks.
タミヤさん、またこんなオッサンホイホイみたいなの作っちゃってぇ〜
引っかかるでしょうが〜
衝動買いスイッチ入っちゃった。
Thank you now please fix the grasshopper and the lunchbox😊
なつかしい😂
I want one
Wish they did something about the battery door.
they did its like the gh2 has a bodyclip to hold it
They put a little tab and a body clip. See 0:40 Its better than nothing!
Don't tell my wife...
初代パジェロに移植できるか…あるいはランチボ
蜂の一刺しでチクんとやられちゃった。
こっちもいいけど、そろそろGT300車両のボディも、ボディ単体で再販しません?
♬昔の名前で出ています♪
padu....
カッコいい(*´▽`*)✨️世代から、外れ気味ですがf(^_^;発売されたら買います🎵ベアリングにCVAにバッテリーホルダーの改善など善きですね(^^)💡先輩方の悩み解消してきて、スゴいですね✨️
I would have felt better about this update if the rear suspension were trailing arms, not unlike the Falcon. It would preserve the diversity of design Tamiya was/is known for. The Trailing arms would not change but be an enhancement over the OG Hornet's SLA. I mean, how many Tamiya Buggies have double wish bone Rear suspensions already?
Agreed, independent trailing arms with mid motor would have been my choice.
I'm wondering if the gearbox can be reversed for mid motor and BBX trailing arms adapted. :)
@@CraigOverend
Does not look like it. Not without significant modification.
Frankly, I would LOVE if someone reissued the old MRC buggies. The Pro-110, Pro-110 Stage two and the Pro-410 Shotgun.
Also, from what I gathered, the Pro-110 and Pro-110 stage 2 could have their transmissions reversed from rear to rear mid motor placement. No mods. Just a screwdriver.
@@DocWolph It looks like a DT-03 gearbox is used which has a symmetric bolt pattern like the Pro-110, so it could be reversed with some grinding for the offset bulge. Might require a lot of grinding and custom fabrication. :)
Do you remember: The rear suspension of the Falcon has short travel, but the dogbones fall out very often. That is very bad design. Its worse than the Striker suspension.
release date pls
フロントサスはいいとして・・・
リヤがなぁ〜
あのギヤボックスベースでMK17のようにダブルウイッシュボーン化できなかったものか・・・
そこだけ残念。
でも欲しい。
No brand new 1/16 RC Tank??😢
Ha oui comme ça il n'a plus rien à voir avec une Nikko Thunder Bolt F10 ou une Traxxas The Cat :) / Oh yes, like that it has nothing more to do with a Nikko Thunder Bolt F10 or a Traxxas The Cat :)
ステアリングもワイパー式にしてほしかった
動画をよく見てみましょう、ステアリングを切っているのにサーボセイバーホーンの位置にステアリングロッドがありませんね?つまりそういうことです
‼️あらまほんとですね
スライドラック式に見えますね
並販らしいが、大丈夫か。
フロントはいいけど、せめてモーターをオリジナルのミッド側で一見はわからない様にして欲しかったなぁ。。
リヤのやっつけ感が拭えない。。
リア周りが残念だなぁ・・・
ボディの後ろからモーターが大きくはみ出てるし
ギアボックスがボディに干渉するのでボディ右後ろがカットされてる。
元のギアボックスのホーシングをカットしてダブルウィッシュボーンにして欲しかったなぁ
企画の際に元のギアボックスの改造案もあったと予想できますが
DT02のギアボックスを使った方がコスト的に安かったのでしょうねぇ
どうせ品薄で買えないんだろw
うーん、、、ダンパーの位置と角度と長さが、、、カッコ悪いです😭
はじめて手にしたタミヤRCホーネットの想い出補正が強すぎるんかなー
リジットは残して欲しかった
これホーネットじゃない
いいえこれはホーネットです