This is one of the best videos on RUclips for windows server.....very practical and Precise explanation. I have been searching for videos like this on youtube for a long time please don't stop making videos for this series
Please continue this series....I am gaining real IT knowledge that is we use in the organisation...... No unnecessary theory, ❌ No any non related concepts..... Your videos are really amazing ❤️❤️🪈
Good tutorial east charmer . Every step explained clearly voice and good quality video. Thanks . I could refresh my knowledge of domain connection. Thanks again . Good work!
Beautiful contents, wish to see videos on Windows Server migration from 2012 to 2016/2019/2022 with details steps and procedure for the same, also wish to see videos on Windows Server troubleshooting, Active directory troubleshooting challenging and difficult scenario based videos.
Good tutorial. Please install VMWARE TOOLS to allow VMS to display their desktops in higher resolutions. The video captures are to small and centred due to low resolution of VMS.
Cool thanks! Ran into one hiccup with my setup (Windows server on hyper-v, physical client) : got an error when trying to join the client to the domain; solved by setting the DNS address on the client to the IP of the Windows Server.
I followed the steps for this, and my administrator account also blocked access to the Control Panel. When I checked your video, there was no easter.local inside the control restrict policy, while mine had both user and bishal.local inside the policy restriction. Where did I go wrong?
For some reason I can't join my client to the domain, I am also not getting any response when I ping the server on my client machine. I made sure to use the servers IP address for the clients DNS server IP.
I completed this but I can change the wallpaper In wallpaper name I put C:\Users ame\Desktop\1.jpg and nothing happens... It is just black. and yes I did force the update
Great video, but I can't get the client to join the domain. I have the adapter in NAT for both machines like you do, but when I type the domain name, it says that it wasn't found. I followed the instructions from your video. Any help?
Hello you have created Disable USB access policy.. suppose i need to allow some users to access pendrive then how we can give permission to access usb ... please let ne know
ok so you can create a security group to add users who needs access to USB devices. then edit the GPO for DIsable USB access. go to Delegation tab, add the SG (allow USB) and set permissions to deny. then create a new GPO to allow USB devices and link the new GPO
Please help, I followed your instructions to install windows server VM but for some reason It won't open settings app to set the DNS. The settings app opens and closes immediately when I click it.
I followed your video series verbatim but when I try to join the machine to the domain it gives me an error message that the domain can not be contacted. What can we do to troubleshoot the lab? It pings and shows the IP address perfectly but it keeps showing the servername as unknown
@@EastCharmer yes mam. everything is the same but no matter what I do it still wont accept it. I'm redoing your course for the 3rd time and its still not accepting it.
I wanna set my windows server static IP address, but I am unable to open network & internet like you showed in the video. It's saying contact you system administrator
Hi, for the homelabs, I don't really recommend using Win 11 at the moment because it requires atleast 64GB to install and that's a lot for a VM. For now, I recommend Win 10 coz it only requires 20GB
@@EastCharmer thank you I really learn a lot now and if you are in the IT you must be versatile or all around so that you can catch up on different knowledge you handle
After setting the server IP to static, I am unable to access the internet on my server. What could be the reason. I am getting the globe symbol on the taskbar.
I try nslookup my server, but it says unknown, while stating the ip address below, I can’t ping my server, what can I do to fix this, I have done everything correctly.
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
This is one of the best videos on RUclips for windows server.....very practical and Precise explanation. I have been searching for videos like this on youtube for a long time please don't stop making videos for this series
Wow! Thank you so much for the great feedback! I hope to make more videos on Windows Server
Very precise and informative. We appreciate you❤
You are so welcome! I appreciate the feedback. Thanks!
Please continue this series....I am gaining real IT knowledge that is we use in the organisation......
No unnecessary theory, ❌ No any non related concepts.....
Your videos are really amazing ❤️❤️🪈
Thank you!! Yes I want to keep doing this series and more homelab series soon!
Im glad you’re making these videos I dont think enough people know you dont need to know how to code to be in a fairly high paying tech job.
I agree! The tech industry is very broad and there's a lot of areas you can work in not just coding or software
Good tutorial east charmer . Every step explained clearly voice and good quality video. Thanks . I could refresh my knowledge of domain connection. Thanks again . Good work!
Thanks for the nice comment!! I'm doing my best to keep improving the quality of the videos! Glad it was helpful!!
Your style of explanation makes things seem easy and interesting. Thank you.
Thank you very much for your feedback!!!
thank you so much for making this playlist , love your explanations and way to teach
You're very welcome! I'm glad you liked the teaching method and content
Amazing videos about the active directives. i am waiting for more videos. thanks for such a informative videos.
you're very welcome! More videos to come!
This is awesome East Charmer!! Keep it going🔥🔥👏🏻👏🏻
Yay! Thank you! Hopefully more videos to come!
Thanks for this great course i am un ingineer informatics with 12 years of experience
oh wow that's a lot of work experience
what is un ginger? 😅
thankyou so muchhhh
You're very welcome!! 🥳🥳
Ang galing mo po 👏
Maraming Salamat!!!
Thanks for every thing that you doing 🎉
You're very welcome!!
Amazing video, keep chering
Thank you! Hopefully more videos to come
IT Support Queen ❤❤❤. Keep thriving!
Thank you very much!!! Appreciate it!!
Great to seeing you channel grow!
Thank you so much!!!
Beautiful contents, wish to see videos on Windows Server migration from 2012 to 2016/2019/2022 with details steps and procedure for the same, also wish to see videos on Windows Server troubleshooting, Active directory troubleshooting challenging and difficult scenario based videos.
Hello!! Thanm you! And will try to make that once I finished covering all the basics
Sweet!!
Thanks!
informative tutorial. Please make a video for software deployment using GPO
Thank you! Will try!
Idol ❤
Salamat
You are Amazing!!
Thanks!!!
I'm grateful. Could you please do a video on DNS?
You're very welcome! Yes I will make a video on DNS and DHCP too
GOOD DEMO.😃👍
Thanks a lot!
Good tutorial.
Please install VMWARE TOOLS to allow VMS to display their desktops in higher resolutions.
The video captures are to small and centred due to low resolution of VMS.
Thank you!! Sorry I was in a hurry to record the videos but will do that next time
👍👍👍
Cool thanks! Ran into one hiccup with my setup (Windows server on hyper-v, physical client) : got an error when trying to join the client to the domain; solved by setting the DNS address on the client to the IP of the Windows Server.
Yes!! That's why you set up the DNS of the server to point to itself so you can use the windows server as the dns server for the client. Goodjob!!!
Thanks for the useful video . would you please do MS exchange and how to config email accounts .
You're welcome!! I'll try next time!!
your excellent, please how to use PRTG Monitoring or How to monitor the whole network, thanks a lot
Thank you!! Will try!!
I followed the steps for this, and my administrator account also blocked access to the Control Panel. When I checked your video, there was no easter.local inside the control restrict policy, while mine had both user and bishal.local inside the policy restriction. Where did I go wrong?
You have to move the policy to the OU where you apply it and remove from under your domain name
For some reason I can't join my client to the domain, I am also not getting any response when I ping the server on my client machine. I made sure to use the servers IP address for the clients DNS server IP.
My windows server and windows enterprise VM seem to both have the same IP addresses, could this be a reason why?
I completed this but I can change the wallpaper
In wallpaper name I put C:\Users
ame\Desktop\1.jpg and nothing happens...
It is just black. and yes I did force the update
Sometimes it takes longer for the wallpaper to apply. I've experienced that before. Just make sure you have the correct path
Hi , I am unable to drag and drop the GPOs to the OUs. Is there anyother way this can be done?
Great video, but I can't get the client to join the domain. I have the adapter in NAT for both machines like you do, but when I type the domain name, it says that it wasn't found. I followed the instructions from your video. Any help?
@@Alexlopez04 can you ping your server from the client?
@@EastCharmer I ping the ip address and I get a response, but when I do nslookup from the client, it doesn't find it
@@Alexlopez04 same!!
Hello you have created Disable USB access policy.. suppose i need to allow some users to access pendrive then how we can give permission to access usb ... please let ne know
ok so you can create a security group to add users who needs access to USB devices. then edit the GPO for DIsable USB access. go to Delegation tab, add the SG (allow USB) and set permissions to deny. then create a new GPO to allow USB devices and link the new GPO
Does anyone know why my internet connection doesn’t work on the windows server? It does on the client VM session but not on the server VM.
What are the specs of your desktop build? Thanks.
Case - NZXT H510 - CA-H510B-W1 - Compact ATX Mid-Tower
CPU - Intel Core i7 10th Gen - Core i7-10700K
Motherboard - MSI MPG Z490 GAMING EDGE WIFI ATX Gaming Motherboard
SSD - I got 2 SSDs: SAMSUNG 970 EVO SSD 1TB - M.2 NVMe (for the OS) and SAMSUNG 970 EVO SSD 500GB- M.2 NVMe (for data)
RAM - Corsair Vengeance RGB PRO 32GB DDR4 3200
GPU - EVGA GeForce GTX 1660 SC Ultra Dual-Fan 6GB GDDR5
Cooler - be quiet! Dark Rock Pro 4 250W TDP CPU Cooler
PSU - CORSAIR RMx Series RM650x 2018 CP-9020178-NA 650 W ATX12V
Please help, I followed your instructions to install windows server VM but for some reason It won't open settings app to set the DNS. The settings app opens and closes immediately when I click it.
Don't worry, it works now after getting help from chatGPT
I think you have the GPO applied to all the computers on the domain including the server. you can remove the GPO that restricts settings
There is opportunity jobs it in your company?
I followed your video series verbatim but when I try to join the machine to the domain it gives me an error message that the domain can not be contacted. What can we do to troubleshoot the lab? It pings and shows the IP address perfectly but it keeps showing the servername as unknown
do you have the correct domain name? with the .local for example
@@EastCharmer yes mam. everything is the same but no matter what I do it still wont accept it. I'm redoing your course for the 3rd time and its still not accepting it.
I wanna set my windows server static IP address, but I am unable to open network & internet like you showed in the video.
It's saying contact you system administrator
Are you logged in as admin to the server?
@@EastCharmer yes I am
@@Varun_SB you might have a group policy object conflicting with this
@@King-ox1ef actually I restarted my system and it got solved 😀😀
Hi, could you please make videos to understand ENTERPRISE VPN related content
Hello!! That's a great video idea! I will try!
How did you get the 192?
Good day Miss
Do you have any link to download the window 11 pro iso? I can't see the link here in your video 🥺
Hi, for the homelabs, I don't really recommend using Win 11 at the moment because it requires atleast 64GB to install and that's a lot for a VM. For now, I recommend Win 10 coz it only requires 20GB
@@EastCharmer thank you I really learn a lot now and if you are in the IT you must be versatile or all around so that you can catch up on different knowledge you handle
After setting the server IP to static, I am unable to access the internet on my server. What could be the reason. I am getting the globe symbol on the taskbar.
What IP did you set it to? Is the gateway and DNS correct?
My GPOs are applying to my server computer as well, is that how they are to function or I did something wrong
@@yakanibosco6696 you can move them to the specific OU that you're using. Make sure they're not under your local domain anymore and just under the OUs
Do you work in in USA?
Yes
I try nslookup my server, but it says unknown, while stating the ip address below, I can’t ping my server, what can I do to fix this, I have done everything correctly.
Is you server on the same subnet as the client? And is it also named correctly? Also check your DNS settings if they're correct
@@EastCharmer yes it’s on the same subnet, it’s also named correctly and the settings in tcp/ipv4 is properly configured