*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Thanks bud! This worked for me too. Maybe worth mentioning that the phone doesn't give you any indication that it's charging when you do this. No beeps... no charging symbol... nada... which threw me at first - figured it wasn't working. You only find out it's worked when you switch the phone on again and look at the %.
Making use of the ruclips.net/user/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type
Works! Though I must admit I'm a scaredy cat. First I set up the phone and closed it in a drawer, then plugged it in (in case it exploded or something).
Charging port on phone was bad, thought that I had to get new one. I had watched some other how to videos, didn't work but this method did work. Thanks, got new life from this old phone.
Don't leave the phone unattended while charging in this manner and use a USB charger rated at 1A maximum to minimize chances of the battery overheating and catching fire. Connecting 5VDC power directly to the battery terminals bypasses safety features built into the phone to limit the charging rate.
You are exactly right! This is carzy for him to suggest to people to do this! Especially when he could have used the 2 pins right beside the battery!! And those are the wireless pins, the battery would reach 100% charge and then disconnect the power from the phone / battery.
It worked. My wife had a Galaxy 2 with a gallery she had not transferd to her laptop and then the cell would not charge. This worked great to fix the transfer of her photos at no tech cost. Thx.
Kelly N ...C/P...Good tutorial friend but I think it's not too smart to connect wires directly to battery... it can burn your battery or motherboard (even I can see here / you connect third "ground" wire too)...better and safe way is to connect red and black wires on your wirelles charging port connector wich is located as two visible pins down left (on left where is CE signature of your battery) to your battery using same method as yours. Left pin is + right pin is - , also this method works for every phone that has this wirelles charging connectors like S3, S4, S5...etc......stay safe. Cheers
I'm kind of confused. When you let us see an example of your phone at 20%, it was 12:34 am. When you let us see it being at 74% at the end, it was 12:29am. Did you pause the video and continue the next day, wait a whole day to charge it, or did you change the time? Maybe for an app like Candy Crush?
Caution, lithium batteries have controller logic to stop high current charging and discharging as well as overvoltage conditions. This logic is sometimes part of the battery but could be somewhere else (mainboard). If you use this technique you may bypass these safety measures and could cause battery fires or explosions. If you insist on doing this: 1) do not leave the device unattended, 2) check device or battery temperature frequently and stop if it gets unusually hot, and 3) learn the proper procedures to extinguish lithium battery fires. Note, just because it appears to work you must do the above every time because of the way lithium batteries age over time; improper charging accelerates this problem (search lithium battery dendrite).
This totally worked on my son’s Samsung J3... battery was charged in about 10 minutes and we were able to retrieve the pictures. BUT BE CAREFUL - the USB plug was HOT when I was done. Don’t leave it unattended.
Good tutorial friend but I think it's not too smart to connect wires directly to battery... it can burn your battery or motherboard (even I can see here / you connect third "ground" wire too)...better and safe way is to connect red and black wires on your wirelles charging port connector wich is located as two visible pins down left (on left where is CE signature of your battery) to your battery using same method as yours. Left pin is + right pin is - , also this method works for every phone that has this wirelles charging connectors like S3, S4, S5...etc......stay safe. Cheers
@@nollatoleranssi9177 it is literally connector to install 3rd party wireless charger (Samsung's later models are shipped with preinstalled wir.cha...and many people aren't aware of those connectors, find, for example, S5 motherboard components scheme on Google and you will know correct polarity places, unfortunately my S5 is kaput, can't test)
thanks a lot bro my phone was not charging for a year an it was a problem in the charging port so I decided to throw my phone out thanks bro u saved a new phone [Samsung galax.. note
One way to tell if your charger may be getting a charge is to attach it to a pc and check on settings. If your phone shows up in explorer you can see the battery status in its properties at least in Windows 7 +
Mark is asking about the the ports not the cables. Your vid is not clear on where the black and red should be wired to. Its looks as though you have the cables connected to all four pins cos you run the wires through them. Mark is asking should the red and black cables connect to all four gold pins or only the positive and negative gold pins.
Me with phone up to my ear:: What? What? What did you say? Brother needs subtitles or one of those circles in the corner with someone doing sign language.
*DO NOT DO THIS!!!* The voltage is all wrong, and Lithium batteries are NOT like other rechargeable batteries, they need special voltage and current limiting... He's lucky to still have a face! If you really want to do it like this, get a 4.2 volt charger for those rechargeable bicycle lights. It will handle all the adjusting needed. The charger has an LED to show when charging is complete. (Lithium cells show either 3.6/3.7/3.8 volts on the label, but they actually charge to near 4.2 volts when full.)
I needed to actually watch you put the red and black wires on. I tried to see exactly what you did but couldn't...did each wire wrap around one or 2 pins? you pulled the pins up? mine seem flat. maybe if you added a light to that area for us non-electronic engineers lol. My s3 is 4 years old. It has 2 batteries (a spare, none original) and a separate charging pad. I use it as backup while my s7 is charging lol and a backup morning alarm. Plus, I can't figure how to get my Samsung internet favorites file over into Chrome bookmarks (yuck).
I think I read all of the comments. This would be a great way to get your data off of the internal memory if you have to buy a new battery, but are afraid your phone is completely going out. However, we would have to use this method every single time we recharge, I guess? Until we get a new battery in? NOT being critical. Absolutely being sincere. I have no problem with using this method and I'm sure it has helpe a lot, as most below say.
fun fact ! those gold rf connector pins to the left also charge the device (they use them for wireless) and thats 5volts going directly into a battery rated for 3.3v . if u use the rf pins you wont risk damaging the battery capacity.
I'm currently in need of this solution due to my phone not charging with any cables. Could you explain a lilbit more what you mean by that? I want my battery to stay healthy, thx
It absolutely works I've been doing it about a week but here are some things to look out for. 1 the flat Chargers better because the wires are separated usually four. 2 they say the red wire but it could be pink or some other color I guess 3 I couldn't find the Plus or the minus until I looked at the battery itself 4 don't leave it unattended it gets hot so check it often and unplug until it cools down 5 take out your SD card before you charge it you don't want to fry anything I haven't taken out my SIM card but that might be an option then you got to reset everything I guess not sure 6 never ever ever ever ever connect it while it's plugged in and unplug it before turning it on to check the charge Yeah I'm a girl and not mechanically inclined but if I can do it you can surely do it!
oh and every cent counts to anyone who says something like "get a battery charger and some spare batteries for like 25 bucks" or something stupid like that i would if i wanted to
Hello, when i do this, i put the proper colors and everything in the right place, this makes my phone able to turn on, and it says the battery is at about 50% every time i do this (its actually dead). But it does not say its charging. I was wondering what is wrong?
I trying to do this with m LG v20 but I am using a USB-C cable and it does not come with a black cable. It has a green, white, red and silver threads that coat around.
use a voltemeter if you dont have black and red wires, but here is a good tip, a good USB wire will always have a black wire and that is always your negative, now all you have to do find the possitive out of the rest of wires
The microport on my phone is out so absolutely NO cord will work to charge my phone. Thought I could find useful videos on the web with successful methods. Tried this method b/c all of the others I found required that you plug the microcharger into the microport on the phone. Here's what I found: 1. The phone IS charging even though the battery symbol on the phone does not reflect that it is charging. 2. After about 10 minutes the battery symbol on my phone read "full". However, when unplugging the cord from the outlet the battery power reading showed only about 25% charged. 3. For every 25% that I wanted my battery to be charged I needed to leave the spliced cables connected to my + and - battery terminals and the other end plugged into an outlet for 20 to 30 minutes. 4. Check the battery to your phone about every 10 to 15 minutes to make sure it is not getting too warm. My battery never got too warm, only the same temperature (to the touch) that it gets when the phone is plugged in to an outlet as usual. 5. After staying plugged in for the necessary time my battery symbol did read 100%. 6. I have not had any issues with my phone since charging it this way.
this video helps me a lot i found my old phone i want to recover some of my photos in that phone and the problem is it wont charging maybe because of its age
Thank you for the video. It works but I assume it's quite dangerous Is there a charger for a battery like a camera charger, but for 3.7v for a specific battery model?
Hello @LowEndTech(MAD) in my redmi note2 , the Charging is felt at the terminal , where you showed that wire connection, but no charging happening, but when i charge it using universal charger seperately it charges, please help me to solve it
+Angel Martell I cut an old "usb" cable. But this can be done with a charger too but you will have to make sure that the charger works with your device and that you have an extra one just in case
I have a note 4 and I test the battery with my tongue and it has no shock in it so I guess the battery isn't working anymore... can this method be use for it to work??
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
Thx dude was able to bring my phone back from the dead
Glad I could help
Thanks bud! This worked for me too. Maybe worth mentioning that the phone doesn't give you any indication that it's charging when you do this. No beeps... no charging symbol... nada... which threw me at first - figured it wasn't working. You only find out it's worked when you switch the phone on again and look at the %.
One of the BEST LOOKING HANDS on RUclips
My goodness! You ain't lying! I was thinking the same thing too! That's nice! ;)
Hehehe
More than i need to know
Making use of the ruclips.net/user/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type
Works! Though I must admit I'm a scaredy cat. First I set up the phone and closed it in a drawer, then plugged it in (in case it exploded or something).
haha that so funny lol but yeah be careful when doing this
Lol
Charging port on phone was bad, thought that I had to get new one. I had watched some other how to videos, didn't work but this method did work. Thanks, got new life from this old phone.
Holy smokes. It took 3 minutes and works! my phone was left dead for 2 months, omg than you so much. I was planning on a new phone! fee. Made my day!!
Great to hear. Also if you have issues with your batteries I recommend buying an external battery charger Like the one I have
LowEndTech (MAD) Hey get back to me asap, WHAT external battery charger do you have ? I've been looking for something like this.
thnx dude.... it really worked for my android device.... in jst 10 mins it got charged from 0-48%.....
Don't leave the phone unattended while charging in this manner and use a USB charger rated at 1A maximum to minimize chances of the battery overheating and catching fire. Connecting 5VDC power directly to the battery terminals bypasses safety features built into the phone to limit the charging rate.
Milosz Ostrow and also that the chargers need to have a constant current and voltage to change the battery properly
that is true but im doing that and my dad said that there's something that changes voltage NOT a resister
You are exactly right! This is carzy for him to suggest to people to do this! Especially when he could have used the 2 pins right beside the battery!! And those are the wireless pins, the battery would reach 100% charge and then disconnect the power from the phone / battery.
It worked. My wife had a Galaxy 2 with a gallery she had not transferd to her laptop and then the cell would not charge. This worked great to fix the transfer of her photos at no tech cost.
Thx.
String Rock loo
Reply if your house is not on fire
Thank you forever to ever aap ki vajah se mera mobile chalu ho gaya
It went from 2% to 67 % thanks bro
My wires only have 3 colors: green, pink/red, and white. Unfortunately, no black wire. Which is positive and which is negative?
For God's sake, man, STOP WHISPERING!
Jay Igaboo
J. Igaboo
Jay Igaboo what if be wants to whisper huh his it your problem he's helping and your being all rude
dont you hear somebody sleeping in the background
Crimson Chin lmaoooooo
Let me show you how to revive ANY dead cell phone battery in 5 Simple Steps!>> t.co/3ycayBV4e1?MRT53df456vert56
could be dangerous this as your bypassing the charging circuit and could over charge your battery resulting in explosion or fire
Yes, thats my point too...but there is still very safe workaround with same method...find my comment in section ;) cheers
It still indicate that % on your phone... You if it over charge... If it goes 98% then unplug it....
@@Silvio_Jadranic how
Kelly N ...C/P...Good tutorial friend but I think it's not too smart to connect wires directly to battery... it can burn your battery or motherboard (even I can see here / you connect third "ground" wire too)...better and safe way is to connect red and black wires on your wirelles charging port connector wich is located as two visible pins down left (on left where is CE signature of your battery) to your battery using same method as yours. Left pin is + right pin is - , also this method works for every phone that has this wirelles charging connectors like S3, S4, S5...etc......stay safe. Cheers
I'm kind of confused. When you let us see an example of your phone at 20%, it was 12:34 am. When you let us see it being at 74% at the end, it was 12:29am. Did you pause the video and continue the next day, wait a whole day to charge it, or did you change the time? Maybe for an app like Candy Crush?
Lune Foxx I honestly don’t know why that happened but this is legitimate.
Caution, lithium batteries have controller logic to stop high current charging and discharging as well as overvoltage conditions. This logic is sometimes part of the battery but could be somewhere else (mainboard). If you use this technique you may bypass these safety measures and could cause battery fires or explosions. If you insist on doing this: 1) do not leave the device unattended, 2) check device or battery temperature frequently and stop if it gets unusually hot, and 3) learn the proper procedures to extinguish lithium battery fires. Note, just because it appears to work you must do the above every time because of the way lithium batteries age over time; improper charging accelerates this problem (search lithium battery dendrite).
short and simple, THANKS!!!! 👍
Oh shit. My S3 bn out fr nearly 3 years. This shit worked. Thnx bro. Subbed
westsideAUKILANI I'm gonna test on my old GT1080-F left for 5 years lol
This totally worked on my son’s Samsung J3... battery was charged in about 10 minutes and we were able to retrieve the pictures. BUT BE CAREFUL - the USB plug was HOT when I was done. Don’t leave it unattended.
What about a non removable battery?
Its 2018 and this method is still useful.
Good tutorial friend but I think it's not too smart to connect wires directly to battery... it can burn your battery or motherboard (even I can see here / you connect third "ground" wire too)...better and safe way is to connect red and black wires on your wirelles charging port connector wich is located as two visible pins down left (on left where is CE signature of your battery) to your battery using same method as yours. Left pin is + right pin is - , also this method works for every phone that has this wirelles charging connectors like S3, S4, S5...etc......stay safe. Cheers
Silvio Jadranic It work only if have nfc on? Other way not work? I have problem get Also this working. 1 is plus and 4 is gnd?
@@nollatoleranssi9177 it is literally connector to install 3rd party wireless charger (Samsung's later models are shipped with preinstalled wir.cha...and many people aren't aware of those connectors, find, for example, S5 motherboard components scheme on Google and you will know correct polarity places, unfortunately my S5 is kaput, can't test)
thanks a lot bro my phone was not charging for a year an it was a problem in the charging port so I decided to throw my phone out thanks bro u saved a new phone [Samsung galax.. note
Gamer4life glad I could help man. Be careful tho and make sure to not over charge
LowEndTech (MAD) ok bro 😉
One way to tell if your charger may be getting a charge is to attach it to a pc and check on settings. If your phone shows up in explorer you can see the battery status in its properties at least in Windows 7 +
Yo!!! Thank u. I fixed my charging issue with this method. now I can use my phone until I get the port replacement.
is it onlt the end left port and end right port? or do u have to run the wires thru all 4 ports?
the middle 2 also? i know left is black neg . and right is red pos
No, just use the red and black cables
Mark is asking about the the ports not the cables. Your vid is not clear on where the black and red should be wired to. Its looks as though you have the cables connected to all four pins cos you run the wires through them. Mark is asking should the red and black cables connect to all four gold pins or only the positive and negative gold pins.
Me with phone up to my ear:: What? What? What did you say? Brother needs subtitles or one of those circles in the corner with someone doing sign language.
*DO NOT DO THIS!!!*
The voltage is all wrong, and Lithium batteries are NOT like other rechargeable batteries, they need special voltage and current limiting... He's lucky to still have a face!
If you really want to do it like this, get a 4.2 volt charger for those rechargeable bicycle lights. It will handle all the adjusting needed. The charger has an LED to show when charging is complete.
(Lithium cells show either 3.6/3.7/3.8 volts on the label, but they actually charge to near 4.2 volts when full.)
Cheers for the help but you need to speak up a bit. Good video.
Thanks for the comment. Yeah I do need to speak up I working on that lol
but how..
That right
LowEndTech (MAD) hi bro
Seany Chapc
Sir this can be use also to mobile n7100 samsung..no problem for this charging system
does it work for blu ?
Do u have 2 have all 4 prongs hooked up
I needed to actually watch you put the red and black wires on. I tried to see exactly what you did but couldn't...did each wire wrap around one or 2 pins? you pulled the pins up? mine seem flat. maybe if you added a light to that area for us non-electronic engineers lol. My s3 is 4 years old. It has 2 batteries (a spare, none original) and a separate charging pad. I use it as backup while my s7 is charging lol and a backup morning alarm. Plus, I can't figure how to get my Samsung internet favorites file over into Chrome bookmarks (yuck).
I did not use phone and I charge same battery as yours with 5v output chrger and is it safe?
It’s not “safe” either way but it’s better to do it with the phone so that you don’t over charge your battery
It is not showing the charging light does that still means it is charging ?
Yeah, you should notice that the battery percentage increases. If not you can disconnect and restart your phone
IT WORKED!!! Thank you man, my phone had been dead for months
I think I read all of the comments. This would be a great way to get your data off of the internal memory if you have to buy a new battery, but are afraid your phone is completely going out. However, we would have to use this method every single time we recharge, I guess? Until we get a new battery in? NOT being critical. Absolutely being sincere. I have no problem with using this method and I'm sure it has helpe a lot, as most below say.
If anyone has read a poem, "For The Want Of A Nail" will understand what it means to charge a phone this way. LOL
someone is sleeping snoring in the room?
It charged my phone very fast but every minute I lost about 4 % battery
Your battery is toast
plz tel me white and green wire where use?
@@hassanjaved6530 You don't need them
fun fact ! those gold rf connector pins to the left also charge the device (they use them for wireless) and thats 5volts going directly into a battery rated for 3.3v . if u use the rf pins you wont risk damaging the battery capacity.
I'm currently in need of this solution due to my phone not charging with any cables. Could you explain a lilbit more what you mean by that? I want my battery to stay healthy, thx
I have a green, white and red colored cable, which one should I use white or green? Is green kind of the ground?
Is it gonna work for LG mobile?
It absolutely works I've been doing it about a week but here are some things to look out for.
1 the flat Chargers better because the wires are separated usually four.
2 they say the red wire but it could be pink or some other color I guess
3 I couldn't find the Plus or the minus until I looked at the battery itself
4 don't leave it unattended it gets hot so check it often and unplug until it cools down
5 take out your SD card before you charge it you don't want to fry anything I haven't taken out my SIM card but that might be an option then you got to reset everything I guess not sure
6 never ever ever ever ever connect it while it's plugged in and unplug it before turning it on to check the charge
Yeah I'm a girl and not mechanically inclined but if I can do it you can surely do it!
Weird question.
You said it works my phone is currently at 0% if I was to do it would it be dangerous if I touched the wires?
How did you remove the insulation on the red and black wires? The copper inside keeps snapping
CrocBrow with a lighter.
Omg thanks actually works u da best
OMG! You're a genius! Thank you 😊❤️😘
Is there any way to make portable charger though with the battery
Does the wires have to be black and red I have only red white and green
It works for me perfectly. Thank you so much bro
Does the cords have to be black and red
its working i followed the instructions and thank you because you have done me and my fiance a great service by helping me save money for her ring :D
oh and every cent counts to anyone who says something like "get a battery charger and some spare batteries for like 25 bucks" or something stupid like that i would if i wanted to
Thanks for the help. It works! And you have lovely hands too. :). J
Hello, when i do this, i put the proper colors and everything in the right place, this makes my phone able to turn on, and it says the battery is at about 50% every time i do this (its actually dead). But it does not say its charging. I was wondering what is wrong?
can you use a white usb wire?
It works thx i really needed my phone
Can you do this with a alcatel A30 fierce its a non removable battery but i have the back removed so i can get to the battery if i needed to.
can I get my pictures off the phone without the SD card
Mine Has red white and green wires which wire should I use
Thank you! You helped me so much! Can't believe it worked!
I trying to do this with m LG v20 but I am using a USB-C cable and it does not come with a black cable. It has a green, white, red and silver threads that coat around.
What if the wires are red white and green? Which is positive and which is negative in that case? No black wire for me.
Would this work on my Samsung mega
will this trick for any Samsung?? because l have a galaxy express, please reply
How would we know, without buying a new battery, whether not seeing the screen is the battery or the screen (led?) has gone out?
in that case I recommend getting an battery charger and try charging your battery directly. it cost about 5 dollars on ebay
it really work's!!!, thanks
use a voltemeter if you dont have black and red wires, but here is a good tip, a good USB wire will always have a black wire and that is always your negative, now all you have to do find the possitive out of the rest of wires
The microport on my phone is out so absolutely NO cord will work to charge my phone. Thought I could find useful videos on the web with successful methods. Tried this method b/c all of the others I found required that you plug the microcharger into the microport on the phone. Here's what I found:
1. The phone IS charging even though the battery symbol on the phone does not reflect that it is charging.
2. After about 10 minutes the battery symbol on my phone read "full". However, when unplugging the cord from the outlet the battery power reading showed only about 25% charged.
3. For every 25% that I wanted my battery to be charged I needed to leave the spliced cables connected to my + and - battery terminals and the other end plugged into an outlet for 20 to 30 minutes.
4. Check the battery to your phone about every 10 to 15 minutes to make sure it is not getting too warm. My battery never got too warm, only the same temperature (to the touch) that it gets when the phone is plugged in to an outlet as usual.
5. After staying plugged in for the necessary time my battery symbol did read 100%.
6. I have not had any issues with my phone since charging it this way.
you are a life saver thankyou so much omg it working yeah
this video helps me a lot i found my old phone i want to recover some of my photos in that phone and the problem is it wont charging maybe because of its age
Thank you for the video.
It works but I assume it's quite dangerous
Is there a charger for a battery like a camera charger, but for 3.7v for a specific battery model?
does this work with blu vivo xl
what was the voltage rating of the battery?
okay, its 3.8VDC. USB is 5V, is this safe?
which wire to connect in which point?
it worked .......... THANK U SOOO MUCH
some boi sleepin in the background
How to get that cord with cut with wires?
Yeah you will have to cut the cord. It’s best if you have a spare
I'm watching this at 21% hope this works.
Does it matter if the wires are touching?
yeah. It wont work if its touching
My old s3 has been dead for like 2 years because of the charging port. I'm struggling to get this to work lol
Shouldn't the black wire only attach to the 2nd ring?
Show me how to shop charge on DS
Yep worked for me :) Thanks bud!! 24% in 10mins!!
No black wire I have white silver red and green??
for how long can i charge my phone like this in minutes or hours ?
How many hour to charge the phone 🤔🤔
this is on older model Android?...
This is for any version that allows you to open your phone back and remove batteries
Dose it work for the iPhone 7 headphone jack😂
AndyCat yes
Hello @LowEndTech(MAD) in my redmi note2 , the Charging is felt at the terminal , where you showed that wire connection, but no charging happening, but when i charge it using universal charger seperately it charges, please help me to solve it
Useful idea dude
it works on my phone..i just did it and thank you so muchhh..
How about black and white wires only
Does it work on colors x80
i have red and white and green wire what can i do please reply
Thanks...your video just sorted me out
it works , what i do not know though is how long do i charge so do not damage the phone
Bro it sounds like you are whispering lol
you help me a lot with rooting my phone with kingroot
+Narzee Bro that's great bro! I'm glad I could help u!! :)... if you have any ideas for future videos let me know
+LowEndTech (MAD) OK
+LowEndTech (MAD) does it work with all galaxys phones the thing u did in the video
+LowEndTech (MAD) and did u use a charger to put that thing in there
+Angel Martell I cut an old "usb" cable. But this can be done with a charger too but you will have to make sure that the charger works with your device and that you have an extra one just in case
May i ask why when i plug in it, there is a weird sounds like a tickling time bomb? Does anybody know what it is?
Is it from the wires or your phone? If it’s the wire you need to make sure the wire is in direct contact
@@MADProductionsAH the wires and they are on the right contact
I have a note 4 and I test the battery with my tongue and it has no shock in it so I guess the battery isn't working anymore... can this method be use for it to work??