I’m not sure servo connector cables used to power booster will let enough current flow to fully power boosters. Should have used balance port of battery to power them. This way they probably working at dropped voltage and very low current thus not desired effect. Peace
Um Im confused. Isnt one of the antennas 5.8 as the Disco can be manually put into 2.4 or 5.8 so therefore you are actually causing massive interference if set to auto select?
Hi Fpvcrew ! Chris Walker pointed me back towards you to show this wifi booster install in the Disco. Great job Man ! Dod you fly it yet and what were the results please ? Thanks. Phil
EagleClip Aerials Hello again!!! I had a problen with one of the boosters and I'm waiting for a new one to come from China. It will take another 10 days before it arrives. I will post a video ones I do the tast with the boosters. Some onefrom another forum tolled me that it will not work, I did not undestand the technical part of why it will not work.
"Some onefrom another forum tolled me that it will not work, I did not undestand the technical part of why it will not work." What did he say exactly ?
EagleClip Aerials Thisis what he wrote: nice mod with the booster, but sorry to say you make it worse rather than making an improvement :( 1st you need to know that chuck power radio output was 32dBm, there is max input for the booster it self maybe just 19dBm max, more than that can fried the booster 2nd let say booster can handle big input, but with big input makes a bid noise, you should know law of the wireless, if you push the power but noise is high then it will useless resolve: you need lower chuck radio power to 15-16dBm maybe makes a different result, or unplug your booster and just mod the antenna it self i'm sorry just being honest review :)
Right. And what do you think ? If the boosters wouldn't work, would a couple of high gain antennas help ? To replace the Disco antennas ? Like these : www.banggood.com/2_4GHz-10dbi-RP-SMA-High-Gain-WiFi-Wireless-Booster-Antenna-p-970788.html?rmmds=search
This is the lates mod and it fly just fine. I also use 3s3p 18650 batteries 10,500mAh ruclips.net/video/AbQTR7QQzDM/видео.html Check the other videos on my chennel.
ordered the following boosters to try. www.ebay.com/itm/SUNHANS-eSunRC-3000mW-UAV-WiFi-Signal-Booster-2-4Ghz-35dBm-WiFi-Signal-F1-G0/112507300521?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D41375%26meid%3D852257d4c5f64927af7aa420097add81%26pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D122346119761&_trksid=p2047675.c100005.m1851 should have them by next week. Stay touned.
I’m not sure servo connector cables used to power booster will let enough current flow to fully power boosters. Should have used balance port of battery to power them. This way they probably working at dropped voltage and very low current thus not desired effect. Peace
have you thought about 4g mod. dustin dunhill and others are getting 25km plus
Yes sir! Thanks for posting awesome mod. Got me subscribing!
ahem....... you switch network to USA and you get 3000m..... it all depends what country you declare in network settings....Greece has 800M.....
Thanks for sharing this video it was a great help to me I'm about to buy one thank you
Scotty tomcat
This mod did not work .
Look at this video ruclips.net/video/aCcO_sDvuy4/видео.html
where your left servo man?
Looking forward to the results
Sorry everyone still waiting for the booster to arrive from China.
Um Im confused. Isnt one of the antennas 5.8 as the Disco can be manually put into 2.4 or 5.8 so therefore you are actually causing massive interference if set to auto select?
Angus Whitehouse
This mod is not working check this one out:
ruclips.net/video/aCcO_sDvuy4/видео.html
Ok thanks, i can have RUclips link edit second part, have you modified the remote control too?
This mod is not working look at this video ruclips.net/video/aCcO_sDvuy4/видео.html
qual o link desses amplificadores?
Hi Fpvcrew ! Chris Walker pointed me back towards you to show this wifi booster install in the Disco. Great job Man ! Dod you fly it yet and what were the results please ? Thanks. Phil
EagleClip Aerials
Hello again!!!
I had a problen with one of the boosters and I'm waiting for a new one to come from China. It will take another 10 days before it arrives. I will post a video ones I do the tast with the boosters.
Some onefrom another forum tolled me that it will not work, I did not undestand the technical part of why it will not work.
"Some onefrom another forum tolled me that it will not work, I did not undestand the technical part of why it will not work."
What did he say exactly ?
EagleClip Aerials
Thisis what he wrote:
nice mod with the booster, but sorry to say you make it worse rather than making an improvement :(
1st you need to know that chuck power radio output was 32dBm, there is max input for the booster it self maybe just 19dBm max, more than that can fried the booster
2nd let say booster can handle big input, but with big input makes a bid noise, you should know law of the wireless, if you push the power but noise is high then it will useless
resolve:
you need lower chuck radio power to 15-16dBm maybe makes a different result, or unplug your booster and just mod the antenna it self
i'm sorry just being honest review :)
Right. And what do you think ? If the boosters wouldn't work, would a couple of high gain antennas help ? To replace the Disco antennas ? Like these : www.banggood.com/2_4GHz-10dbi-RP-SMA-High-Gain-WiFi-Wireless-Booster-Antenna-p-970788.html?rmmds=search
And another thing, if this guy was right, is there a possibility to add something (a device) to bring down this 32dbm to 15 dbm CHUCK output ?
Nice mod, but I’m worried about the added weight.
This is the lates mod and it fly just fine. I also use 3s3p 18650 batteries 10,500mAh
ruclips.net/video/AbQTR7QQzDM/видео.html
Check the other videos on my chennel.
.....anyone have a new/used Parrot Disco out there they want to sell me?
Thanks in advance!
Hi. Can you add a sequoia camera in this drone. thank you.
yes you can but dont do the above. One antenna is for 5.8.
Where are the link to the boosters?
Helderhugo
These boosters don't work I have changed the mod. Look at this video ruclips.net/video/aCcO_sDvuy4/видео.html
I made the same change but the disk parrot did not get the commands from the remote control I had to disassemble everything
Would you have any idea how to power these boosters on a bebop 2 drone?
L J
sorry do not know
Excuse can you have links where you bought the tag?
Giacomo Matteoni
banggood.app.link/B63FK33BME
hello but then it works with 2 booster dragon link thanks
news?
ordered the following boosters to try.
www.ebay.com/itm/SUNHANS-eSunRC-3000mW-UAV-WiFi-Signal-Booster-2-4Ghz-35dBm-WiFi-Signal-F1-G0/112507300521?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D41375%26meid%3D852257d4c5f64927af7aa420097add81%26pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D122346119761&_trksid=p2047675.c100005.m1851
should have them by next week.
Stay touned.
Don Gauchos
Lokk at this video
ruclips.net/video/aCcO_sDvuy4/видео.html