TEDGUM TED31041 engine beam bushing puller for VAG vehicles
HTML-код
- Опубликовано: 9 окт 2019
- Replacing the engine beam bushes on VAG cars is a real challenge and often it is only half-done due to an unusual solution. The set consists of 2 bushings (lower and upper) between which the rear engine mount is mounted. For proper repair, the bushings have to be aligned evenly. This is crucial for trouble-free mounting of the engine mount. In addition, the hole for the engine mount should be blocked so that the new bushings are not damaged when they are pressed in, as they have a plastic outer lining and much larger than the diameter than the socket. Without a specialized tool, it is easy to damage the newly pressed bushings, which further complicates the replacement process.
The new TED31041 puller from TEDGUM comes to the rescue in this situation. Thanks to the solutions used, the process runs smoothly without having to remove the beam from the car. The repair can be carried out by one person. Efficient exchange is much faster generating large savings. The raw material used, plain bearings and triangular thread make the puller an extremely durable tool. The puller is used in 20 models of extremely popular cars.
Applications:
AUDI: A3, Q3, TT
SEAT: Alhambra, Altea, Leon, Toledo
SKODA: Octavia, Superb, Yeti
VW: Caddy, Eos, Golf, Jetta Passat, Passat CC, Scirocco, Sharan, Tiguan, Touran
Product catalog number: TED31041
For more information, please visit our website: www.tedgum.pl 
Авто/Мото
Hello , I would love to have this tool for my Passat B6! How much does it cost please? Thanks
I have one if you want, contact me on my email
The "Where to buy" list is on our website at: www.tedgum.pl/en/where-to-buy/
Will this work on a 2019 VW Atlas 3.6l awd ? If not do you have any suggestions.
We do not have the knowledge regarding the car you mentioned, but if the engine suspension is based on the same components as in cars mentioned in our catalogue, then it should also be applicable. The full list of applications can be found in the "USED IN VEHICLES" list under the product picture in our catalogue at: katalog.tedgum.pl/items/VEdfW1QtODg5Nl1URUQzMTA0MQ-tedgum-ejector-control-arm-bushing-ted31041
Nushki duguri (means thank you in Polish)
Replacing these bushing is a real pain if you don't have the right tool and the tools are usually very expensive and they are not universal for all VAG. I don't know why German engineers did not design a bushing system that can be held in place with a plate with bolts. there are many ways to make that nightmare a sweet dream. :/
Curva drecks arbeit
can it be used for Caddy 2k? It has the steel/metal front subframe.
According to our knowledge, the puller is compatible with VW Caddy III, but we do the knowledge regarding Caddy 2k, but if the engine suspension is based on the same components as in cars mentioned in our catalogue, then it should also be applicable. The full list of applications can be found in the "USED IN VEHICLES" list under the product picture in our catalogue at: katalog.tedgum.pl/items/VEdfW1QtODg5Nl1URUQzMTA0MQ-tedgum-ejector-control-arm-bushing-ted31041
@@TEDGUMtv A bit late, I walready purchased the product and tried, it failed. I modified the tool and put something in bewtween the plates and barely managed to push the bushings in.
@@autoh2039 Thank you for the information. If you would like to share with us your experience in this matter, perhaps we could make additional modifications to help to support this model, too. We will be pleased to receive the feedback at support@tedgum.pl
@@TEDGUMtv no big mods needed. You can just copy example from others. I will try and mail you some photos with my mods. THX!