HOW TO REPLACE FUEL PUMP ON HYUNDAI ELANTRA 2011 2012 2013 2014 2015 2016
HTML-код
- Опубликовано: 9 сен 2024
- HOW TO REPLACE FUEL PUMP ON HYUNDAI ELANTRA 2011 2012 2013 2014 2015 2016
► Our Website: mechaniclifesty...
In this video, we will demonstrate how to remove and replace the fuel pump on Hyundai Elantra fifth generation. We demonstrated on a 2013 Hyundai Elantra GLS fuel pump replacement. It is recommended to replace the whole fuel pump assembly. Some models and years might differ.
This video might be helpful on:
2010 Hyundai Elantra Fuel Pump Replacement Removal Location
2011 Hyundai Elantra Fuel Pump Replacement Removal Location
2012 Hyundai Elantra Fuel Pump Replacement Removal Location
2013 Hyundai Elantra Fuel Pump Replacement Removal Location
2014 Hyundai Elantra Fuel Pump Replacement Removal Location
2015 Hyundai Elantra Fuel Pump Replacement Removal Location
2016 Hyundai Elantra Fuel Pump Replacement Removal Location
Products used in the video:
► Screwdriver Set: amzn.to/2C6r3Sh
► White Grease: amzn.to/2Cs9jE8
► Makita Impact: amzn.to/2DJ59EP
► Socket set: amzn.to/2CudOho
► Hammer: amzn.to/2ClQHGz
► Shop Towel: amzn.to/2AkYLll
► Mechanics Gloves: amzn.to/2CS2VUE
► Protective Eye Glasses: amzn.to/2EPsnux
► 3/8 Extension: amzn.to/2CBxUq0
► Fuel pump: amzn.to/2qgaPV9
► 2ND Channel Subscribe: bit.ly/2a86p9Z
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► Ford Fiesta ST BUILD bit.ly/2a59UKp
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300
amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch
amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser
amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable
amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310
amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405
amzn.to/2jk8nqB
•GoPro HERO5 Black
amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510
amzn.to/2ktOuB7
►Social Media
Instagram: / worldmechanics
FACEBOOK PAGE: / worldmechanicsofficial...
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
World Mechanics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCJ9xpq0qUZevSEdBSFqO2ow
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thanks a ton for this video. I did this 2 years ago on my Elantra, and now I need to do it again. There is something fundamentally wrong with the design. I hope Hyundai is taking notes.
The floaty thing lol, ....also know as the 'float' or fuel level sending unit... lol. Good video, this helped me alot
Outstanding video! Thanks for showing us step by step and providing high quality video (HD). Got mine out and reinstalled with new assembly in under an hour thanks to your expertise and for sharing your knowledge. Many many thanks! Keep up the great work. I liked and subscribed.
No need to remove that valve when you are taking out/putting back in the pump assembly. The cutout in the metal floorboard is actually wider towards the back, so just turn the valve towards the back of the car and you can get it through.
Thank you for the update. I will be changing the fuel assembly in my elantra gt and that is ons less step to do.
Nice video, there are not many videos that show you how to specifically work on a newer model for the Elantra. Keep it up my friends!!! Can you make a video on how to replace the lever assembly?
ذذذذط
Thank you for the help, my dad and I changed the fuel pump yesterday in my elantra and it was just what my car needed!
Do you recommend pulling the fuse for the fuel pump, starting the car and letting it stall in order to relieve fuel pressure? I don't think I saw that mentioned in the video.
Yes ive seen another shop video recommend that. You would have to reconnect the battery, start the car and let it die. and then disconnect the battery again. But im not a mechanic and if your fuel pump isnt working it might not matter..
Why does his voice sound like jean girard from talladega nights but thanks for the help I got the job done
Easy way to get to seat bolts is from back with ratcheting wrench, just disconect back seat drop it forward and unscrew bolts. Btw on my 1.6 elantra its not so tight fit.
Thanks a lot (merci), I appreciate this work
My Elantra 13 has really bad fuel economy. I am getting like 19mpg. I don't know if too much fuel is going into the engine or what exactly is going on.
thank you for this video!!!!!!
67k mile and fuel pump broken.. what a quality. Mine got replaced too around that number
Great instructions! I have a limited model so the rear seats are heated. I am unable to remove the rear seat entirely.
Did it make the job a lot harder, or were you able to swap your fuel pump without too much trouble? I have a limited as well and will probably need to change the pump soon.
Instructions worked perfectly. Only issue i had was the ring was a pain to get off. There is a tool for that (rock auto carries it) in case your ring gets stuck
Know what the tool was called?
@@korkee1111 PERFORMANCE TOOL W80668, or LISLE 63000
Awesome video. I noticed this was released 4 years ago . Does anyone know if this works with a 2017 model ?
very likely
Use a brass punch or the special tool to remove the ring .
NO SPARKS
So i currently have 2 fuel pumps in my tank because i couldn't get the first one out......all you used was a flat head??? The fit is extremely tight as you said and now i have to do this job again....not looking forward to it
great video!...much thanks
does the same apply on a 2013 coupe? i know the back seats are different so idk if that’d make a difference or not. thank you
You need a fire extinguisher ready. Dang dude! Oh and that's the fuel filter not an emissions part. At Oreilly's you get the whole assembly without having to install rubber bushings or taking off the and using the OLD sensor.
😂😂
I saw your assembly didn't come with a new pressure sensor. Is it good to use the old sensor since the car is used to that? Or should you use the new one?
Also, when you buy a new assembly, does it come with a new fuel filter? Or do you have to buy that separate?
And I love you guys! 🙌 You taught me how to replace my alternator as well. Keep up with the wonderful videos!! 🙏
Mine came with the filter, I didn't change the sensor
Good job
Great 👍🏽 video
Perfect , thamks a lot
What is that sensor that you have to unplug to move the black cover completely out of the way called?
Is that the thing that throws a p0453 to an OBDII reader? if so, i need to replace that, and the dealership told me it was inside the gas tank and 500 dollars to repair...
Thanks.
When I need to replace fuel pump? and can I replace the filter only?
Badr Basrah they have a video about just replacing the filter if your arent hearing a whiny noise when accelerating but do have a lack of power and possible rough idle or stalling chances are you dont need to replace the pump and can get away with the filter
Would this be same for 2018?
where is fuel filter on a 2007 hyundai accent se?, also how is back seat removed?
Thank you in advance
Thank you
I close my eyes and listen to you and I swear I see Chewbacca speaking english
Exelente
Is this the issue I’ve been reading about with cold starts. I read it’s a bad fuel pump then when it warms up it’s fine.
What exactly have you read about? I've had an issue with mine that's really strange for years now and it's never thrown a check engine light. Hyundai dealership said they wouldn't do anything until the light came on. I've tried a few different things myself, but no dice. When it drives, it's smooth as silk... No missing or anything. But sometimes when I start it up after it's sat for a while it takes at least two or three, maybe even four, seconds to catch. Also sounds a little strange. Haven't wanted to let someone just throw parts at it without a concrete answer so I've just dealt with it. It's never refused to start up, just kinda concerning and I'd love to have it fixed.
Trever Booth I don’t know if it’s the same issue but when I replaced my fuel pump which was very easy to do it fires instantly every time now and runs very smooth.
@@tampametal might be worth giving it a shot then. Certainly can't hurt. Thanks for the reply
@@tampametal should've asked, did you get the OEM Hyundai pump or an after market?
Trever Booth carparts.com has a OE for $66
Hi guys .i need to buy one right now.where u bought this item...grettings
my wife broke her room running into a curb can that disconnect the emission part that's connected to the fuel pump because ever since my wife did that you've been getting a paint thinner gas smell in the car when it runs for a while
Do you know the part number for the fuel tank pressure sensor
Not sure of the OEM part number, but GPD 1811261, CarQuest ECA2922, WVE 5S17151, VEMO V52720199 should all fit.
Good
hi. how to check fuel pump and oil pump by gage pressure. elantra 2013
❤❤❤
green ring??? the old or the new one
The floaty thing......YAY!!!
If my car is over 200,000 miles can I replace fuel pump even before it goes out?
Is your 2013 Hyundai Elantra USA made or Korean made? The fuel pump is supposedly different for the Korean or US Made so I would like to confirm the the part you list works for my Elantra.
So my car being korean made didn't matter for the fuel pump, but it did for the starter, due to the number of splines
Is this the same part for A 2017 Hyundai Elandra
Why didn't you pull the fuse for the fuel pump? Wouldn't that then alleviate the pressure?
Can you tell me what tools are needed to replace the fuel pump
Sorry i just saw your prior post
How do you replace a discovery3 air suspention
How do you remove the has tank?
what are the symptoms to know that need to replace it?
How to replace fuel injector on a hyundai veloster turbo
hello can you help me?
i would like to buy
FUEL PUMP ASSY-LPG 33051 ( for hyundai sonata 2011)
I'm having trouble getting the metal thing off, it's really stuck. Any suggestions?
Figured it out. I just kept hitting it with the hammer but harder and it came off.
My customer put diesel fuel in the car. Now I have to take the diesel out through the fuel pump opening.
hyundai elantra 2015 fuel high pressure pump ? ?
Does this vehicle have two fuel pumps
I got 2017 would this work for me
I replaceded mine but in the dash board just shows full fuel all the time.
quick hint: when replacing the pump to remove pressure from the lines unplug the fuel pump fuse and let the car die. option 2 although not recommended: goto fuel rail, find the pressure test valve, schraeder valve: remove cap and press down center core. unfortunately this will cause fuel spill into engine. hence i do not recommend this.
How did you know the fuel pump was bad? My car is occasionally stalling...
same issue here
My elantra started this morning and died. Now it just cranks. I am almost positive the fuel pump is shot. 2014 with 97k miles on it. Bought just the pump but wondering if I should have bought the entire assembly
Same with my 2012 Elantra. Was it your fuel pump?
@@Lwill0 it was. 300 dollars for the new assembly.
@@christopherhendricks4369 Wow. I've seen one from autzo zone for $150 idk if it's the whole assembly or not
75 dollars for mine putting it in Wednesday
@@bobg3221 where did you buy? It's not difficult once the old one comes out. Gotta wrestle it a bit
Help guys! I have a 2012 Hyundai Elantra. 50,000 miles. The dealer I bought the vehicle from has tried to fix this problem 3 times and said they cannot replicate the problem. First they said bad gas, second bad spark plug , third it went to Hyundai and they did some recalls but unfortunately the problem is still happening. When i start the car sometimes it sputters like it will stall. It seems like the engine is struggling to get gas. Sometimes it happens even while im accelerating or even im reverse. The rpms drop a touch every time it sputters. Sometimes if im at a light i hit the gas and the car feels like its in neutral like i just revved the car up to 4000 rpms and it doesn’t move. I let off and hit the gas again and it goes. Fellas where do i start!! Help please
Also I have no check engine lights on at all. And i hooked up the engine diagnostics tool and it came back clean. The car is an automatic also.
Pp
Stop saying "Okay" and "Guys" so much.
I changed the fuel tank pressure sensor in my 2011 Hyundai Elantra and the check engine came on 😐