For some reason the link to the membership doesn't work in the description. Here is a direct link if anyone wanted to join the membership. And I appreciate you supporting the channel in advance. ruclips.net/channel/UC46AZdy5lJVvEE2NMsyWolAjoin
@@davesworld2132 Dad always said, duct tape and wd40 were the only tools he needed. If it moved and wasn't supposed to, duct it..if ut didn't and should hose it with 40
Great video! I did want to ask if there is any way you could make a video on how to get the car up on the blocks/ all 4 tires off the ground? Jacking/Lifting points to use, and in what order to lift it. I have looked, and there just doesn't seem to be a good video for this. I have a 2013 PPV.
Great Video. I’ve sent a email about my 2013 PPV, could I install 6 piston front gen 2 cts-v brembo brake kit with 2 piece 370mm fronts on it and 4 pistons gen 2 cts-v in the rear?
I have calipers and rotors off my 2017 SS sedan. Will everything fit on my 2011 Caprice? I know I have to mod the rear dust shield regardless. Any help would be appreciated
Here is the link. I appreciate this very much! Feel free to let me know about videos you want me to make for the channel. ruclips.net/channel/UC46AZdy5lJVvEE2NMsyWolAjoin
It’s a cross diagonal system with an ABS module you can pretty much start anywhere. I usually go around the car three times anyway so it doesn’t matter
Ok changing my fronts soon to brembros. Just wondered as I'm only changing the fronts should I still start rear right then left then front right and then driver and do that a few times you say eh?
You’re adding a lot of area for fluid to travel so you should do all of them a lot of times you have to make two passes for each caliber so just bleed everything twice. Always start at the inner bleeder
For some reason the link to the membership doesn't work in the description. Here is a direct link if anyone wanted to join the membership. And I appreciate you supporting the channel in advance. ruclips.net/channel/UC46AZdy5lJVvEE2NMsyWolAjoin
I like the criticizing character you added in here. It adds some good comedic moments.
What a great upgrade kit. The demo is pretty convincing. Also, changing the line to support brand new calipers is smart.
ROTFL damnit Bro Dave....
Not gonna lie changed the entire video and worked an extra week on it to add him in for you! Lol it was fun.
@@davesworld2132 that was hilarious. Duct tape to the rescue - again
@@bigdogchrisl love duct tape! It saved me today!
@@davesworld2132 Dad always said, duct tape and wd40 were the only tools he needed. If it moved and wasn't supposed to, duct it..if ut didn't and should hose it with 40
@@bigdogchrisl Did you ever see the movie skyscraper?
Great video! I did want to ask if there is any way you could make a video on how to get the car up on the blocks/ all 4 tires off the ground? Jacking/Lifting points to use, and in what order to lift it. I have looked, and there just doesn't seem to be a good video for this. I have a 2013 PPV.
I could make a video like that however I do not have the same car. But the concept will be the same on almost cars.
WoW! The Caprice looks like a completely different vehicle than one with a 'normal' branded grille. I bet he really throws off the public. Haha😅
Yea! The interiors is confusing in some of them too. They look like a G8 but have an SS interiors sometimes.
@@davesworld2132the newer ones match SS and the old ones match g8
@@bjturner47 I like the newest ones. So far it seems hard to find one without the computer center consul.
What is the bang for buck factor?
The stock front calipers do a pretty good job for a single piston caliper.
Depends on what your doing with the car. Lots of people try to be cheap then have problems down the road
Question, would these also work with the stock steel wheels? Trying to go for more of sleeper build.
Depends on which ones you have. Message me through the site with pics so I can see.
@@davesworld2132 thanks for responding so fast I’ll shoot you a message in just a couple minutes here!
Did you have to drill out the holes where the Brembos mount to the knuckle? Also did you use longer wheel studs?
No you don’t have to do anything like that with my kits
so are these complete v1 brembos ? what rotors from what model car , and the e brake works ?
I have complete set ups available at www.g8brakes.com I can alter for the PPV
SO this kit does not require caliper adapter brackets?
No all of my kits are built specifically for these cars.
Great Video. I’ve sent a email about my 2013 PPV, could I install 6 piston front gen 2 cts-v brembo brake kit with 2 piece 370mm fronts on it and 4 pistons gen 2 cts-v in the rear?
Not entirely. I have a kit that will fit if you want to run 6 piston
@@davesworld2132 yes I definitely want to run 6 piston
@@jnasty9211 I will reply to you tomorrow during the day it’s after midnight now. Though I am still up my brain stops working after 11 lol
@@davesworld2132 😂 no problem man. I appreciate it, you’re a lifesaver 🙏🏽
I have calipers and rotors off my 2017 SS sedan.
Will everything fit on my 2011 Caprice? I know I have to mod the rear dust shield regardless. Any help would be appreciated
Hi message me directly at www.g8brakes.com
How big are the rotors? Compared to stock G8 GT?
Stock GT are like 11” rotors. I’m the front and 10” in the rear. These are 14” front and 13.8 rear
Hey Dave, I’m not seeing how to join the channel members. Do you have a direct link
Here is the link. I appreciate this very much! Feel free to let me know about videos you want me to make for the channel.
ruclips.net/channel/UC46AZdy5lJVvEE2NMsyWolAjoin
Is there a way to add 2019 CTSV brakes to a G8 GT? Having issues with caliper mounting bolts to the G8 knuckle.
Sell them and go to davescustomparts.com I have G8 specific kits.
How much space from the back spoke do you think is enough to clear
Back wheel or front wheel?
I would be interest in finding out what this Big Brake Kit for a Chevy Caprice PPV/Holden Caprice costs?
No problem My contact and website are in the description and the video.
what year is the caprice
How come.ya started at the front of the car to bleed?? Don't you start furthest from master
It’s a cross diagonal system with an ABS module you can pretty much start anywhere. I usually go around the car three times anyway so it doesn’t matter
Ok changing my fronts soon to brembros. Just wondered as I'm only changing the fronts should I still start rear right then left then front right and then driver and do that a few times you say eh?
You’re adding a lot of area for fluid to travel so you should do all of them a lot of times you have to make two passes for each caliber so just bleed everything twice. Always start at the inner bleeder
Ty very much. Probably use a bleeder and friend do did and everything same time.
Damn those wheels off a honda civic 🤣🤣🤦🏻♂️
I need this kit. How much?
Best to email me through my website. So I can go over options.
anybody ever got 6th gen calipers to fit on the rear of g8 ??
Not without custom brackets.
@@davesworld2132 we’re can i order custom bracket from dave ? are they on your website ?
@@carfreaks9736 do you already have calipers?
@@davesworld2132 yes
@@davesworld2132 i actually just emailed you through your website also
You are a GOAT 🐐 for this my guy
Best comment to me!
@@davesworld2132 😂
@@davesworld2132 Hey Dave, I picked up a 2013 caprice. How much would it cost do to a brake swap like this?
@@sleaze7mile574 message me through www.g8brakes.com I can go over prices with you