@Ernie Camp - Damn straight man!! That would be cool as shit. I would rock the hell out of it. You could just go Sound Paralysis Fishing for the Large Mouth Bass with the acoustics from the Engine. You just grab them with your net when they float to the top LOL 🤣.!!
I've been wondering about a blower on a modern engine. Everybody is going for turbo powered engines. I old school and enjoy the sound of belt whine with the blower. The torque curve is outrageous.
Old school blowers on modern fuel-injected engines like this is pretty much mirroring what the Germans did with their aircraft engines during WWII, and those worked stupendously well when they weren't starved for strategic resources (specifically high-octane fuels) like what happened later in the war. That's why the Germans were so interested in making air-worthy Diesel engines by the way. By that point in the war, the Allied forces had pretty much cut-off German access to high quality and/or highly refined petroleum products, so they tackled the problem with multiple solutions. Diesel engines for almost every application was just one of those solutions. Another solution was that they started making synthetic liquid fuels from coal and natural gas instead of crude oil. As far as I know, that's the first time any plans were made for large-scale production of synthetic petroleum products, and I'm relatively sure that research and development work done to enable that during WWII was part of the science used in order to develop modern synthetic motor oils. The only reason we don't use the same processes to make liquid fuels for internal combustion engines is that it costs more to do that than it does to just distill and refine crude oil into gasoline, diesel, jet fuel, etc. I bet it would only take maybe 10 years to get refineries switched over to making synthetic fuels from natural gas and coal instead of crude oil if the crude oil supplies were ever cut off suddenly or not-so-suddenly.
Prob one Of The most informative engine build ever.. a true old school mixed with new tech.. thanks for the video.. looking forward to more of your builds..
I love Motion Race works. They have awesome customer service and are always there to help when I run into snags. They’ve saved me by staying open seriously LATE just to overnight me a part. Best guys in the business.
Not my first comment but it’s great to be giving all the measurements and spec’s. And learning about the LS upgrades because the only American V8s I have built were for Cup cars. I have a specialized shop and just work on BMWS and I still will go over to the race shop and use the equipment in the motor room to do stuff to the cars I’m fixing. When I worked at Jimmy’s I mainly did engine assembly and dyno them. I stayed in racing from 1994-1999. I had a great side business of working on BMWs when I worked there. After I got enough to build my shop I quit the racing world. I have tinnitus from being around all those screaming motors, only time we wore hearing protection was when wearing a head set when the car was on fire track. I can’t believe we were that dumb because all the old timers were usually def in 1 ear from tuneing on a race car. Now I’m in my 40s and ears ring like a bell.
This build is perfect, it's going to be super cool in an airboat. I love the look of old-school superchargers, if I had the money I would build the same thing
Found your channel subbed because the way you give the info and talk reminds me of the old hot rod TV shows my dad used to watch and I loved watching them even if back then I never understood any of it lol
We do this all the time here in Australia just too do skids that's our stock standard go to build for a not to expensive burnout car build or some of the guys with big money are putting big blocks with 14/71 blowers 2500hp just to burn rubber and do it under 1min that's the aim of the game 🤜🤛🇦🇺
I have not seen a blower setup on something modern. It's been a really really long time but it goes to show you some of the old school tech can still do it with the right match ups. Nice job guys!
back in 75 my friend ran a 611 blower on a LS 6 small block one fast car but it was one expensive engine but he had sponsors pay for it pretty sure they owned the car he use to do a lot of west coast racing
That is a beautiful creation from someone who has a love and a passion for creating perfection in motion! To think that thoes pistons will be rotating thoes valves opening and closing all of thoes pieces moving at 3000 to 5000 revolutions and minute for hours on end for years of getting abused ran hard and left to rest only to get beat on for hours and year after year.... only the best can build the best
Might of been mentioned but shouldn't a belt tensioner push inwards after the blower pulley? Usually tensioners don't ride on the belt's teeth. They ride on the flat side of the belt as it is smooth. The current setup might also shake the belt even more by riding in the teeth and possibly cause premature wear.
@@rondoanderson usually an alcohol fed smaller big block being revd to the moon. Typically a mid 460 cubic inch with a 14/71 blower being revd out to 7500+ rpm. Because it runs on alcohol it can do that for 2 minutes (or more) without overheating.
Airboat seems like a perfect place to use turbo's rather than Roots blower. Propellers work most efficiently in a narrow rpm band where turbo's would be most happy to run....and the instant response from the Roots won't be as significant as with a car. Turbo lag wouldn't matter and they'd make more power at less boost with cooler intake temps. But I understand the owner wanted the visual impact of the Roots...and he got what he wanted in spades! One question: How long is that blower belt going to last flapping around like that?
BDS is great for an old school 8/71. The money is on The Blower Shop high helix with hard anodized case and teflon strip triple lobes. 60% more efficient than the original twin lobe. A blower shop 8/71 with intercooler could likely hit 1100 on pump gas with higher efficiency and cooler air.
and will need to be restripped adding maintenance and cost. The air for this will be really chill, since its a boat I would guess they would just pull in freshwater for the intercooler but I am not familiar with airboats.
They are 1 3/4 inch to 1 7/8 inch diameter, just fyi. These are Prestige's standard headers they keep in the dyno for just about all their LS builds. Thanks for watching!
Why is the blower belt tensioner tensioning on the cog side of the belt vs the smooth side? I mean the tensioner pulley is smooth wouldn’t it make more sense to run it on the smooth side of the belt? And maybe a shorter belt to reduce the belt slap?
Since the engine is visible, paint lettering on some of the parts, using a material that glows when heated. If the customer is a Lord of the Rings fan, the lettering could be Tengwar -- writing only revealed by fire. :-)
The guy who put the camshaft in did it so Smooth he used the force on that no bumping or stopping just smooth install
I love blending old school and modern tech, because the old school is time proven. The new tech is far more durable and that is just a winning combo!
Might as well have a procharger for visibolity
@@shadowopsairman1583 It's going in a boat isn't it. That's at the rear...
@@shadowopsairman1583 Visibility behind you? 😕
@@davelowets to watch the losers behind you i guess😂
I agree! I’m definitely a fan of taking the best of both worlds
That airboat is gonna be blowin’ gators right out of the water!
That big bad boy would be just as cool if it was going in an old school V drive!
@Ernie Camp - Damn straight man!! That would be cool as shit. I would rock the hell out of it. You could just go Sound Paralysis Fishing for the Large Mouth Bass with the acoustics from the Engine. You just grab them with your net when they float to the top LOL 🤣.!!
Our coast guard airboats from dynamarine have ls engines making 750hp incredible stuff, your engine looks so cool!
I've been wondering about a blower on a modern engine. Everybody is going for turbo powered engines.
I old school and enjoy the sound of belt whine with the blower.
The torque curve is outrageous.
That airboat's gonna fly and the driver's gonna smile! FANTASTIC BUILD! The care to details was great!
Blower is even bigger than the entire engine. Insane job well done 👏.
Everything about this is awesome
Watch the Australians doing there burnouts - those guys take blowing a LS to a whole new level!! This one you built is beautiful!!
And us Kiwis. Innovation is key. If you can think of, just try and do it until it works, to prove yourself right.
This engine builder guy was next level... I'm just amazed watching the craftsmanship.
Would love to see a video on an old school style build with a roots blower with mechanical hat injection on a 540 BBC running on pump e85
look at every Aussie burnout car in AU but switch out the E85 for alcohol. They are all blown, mechanical injected v8s of all kinds
The belt will always be the craziest part to me how much it can move and still grip WOW, guys Wow
It's cogged.
Yeah that huge belt flopping around is pretty crazy.
I run an engine very similar to this-Blown 408 Ford Windsor-In a 65 falcon Ranchero-Its a rocket ship! Did all the work myself.
Sounds like a fun ride!
I absolutely love old school roots blowers on LS engines. My dream is to one day have a setup like this in a drag car, if I can ever afford it.
Air boats are so friggen cool!! Those guys go insane with engine combos. Little flat bottom pc of aluminum with a blown 632 BBC. They sound awesome.
Old school blowers on modern fuel-injected engines like this is pretty much mirroring what the Germans did with their aircraft engines during WWII, and those worked stupendously well when they weren't starved for strategic resources (specifically high-octane fuels) like what happened later in the war.
That's why the Germans were so interested in making air-worthy Diesel engines by the way. By that point in the war, the Allied forces had pretty much cut-off German access to high quality and/or highly refined petroleum products, so they tackled the problem with multiple solutions. Diesel engines for almost every application was just one of those solutions.
Another solution was that they started making synthetic liquid fuels from coal and natural gas instead of crude oil. As far as I know, that's the first time any plans were made for large-scale production of synthetic petroleum products, and I'm relatively sure that research and development work done to enable that during WWII was part of the science used in order to develop modern synthetic motor oils.
The only reason we don't use the same processes to make liquid fuels for internal combustion engines is that it costs more to do that than it does to just distill and refine crude oil into gasoline, diesel, jet fuel, etc. I bet it would only take maybe 10 years to get refineries switched over to making synthetic fuels from natural gas and coal instead of crude oil if the crude oil supplies were ever cut off suddenly or not-so-suddenly.
Cleetus mcfarland thnking to himself "LS powered airboat?... LS FEST!!!!!!"
I still have the love for the old school roots blowers! this was a great video on this!
Thanks a lot!
What an engine!! Congratulations for hitting 100K too!!
Thanks a lot. It was a big deal for me. And thanks for watching!
More engines need to be built like that 6-71/8-71 blower's engine machines.
Prob one Of The most informative engine build ever.. a true old school mixed with new tech.. thanks for the video.. looking forward to more of your builds..
God hearing that thing get loaded down and start whining was so HOT.
I would like to see Ford Coyote with old school blower setup. 🇺🇸✌️ hello from Finland.
Seeing unprotected rods go down in a cylinder give me goosebumps. Awesome build tho
did you see cam = no oil on anything ! = that is crap !
@@ronnieboucherthecrystalcraftsm ya, I've got a lot of things to say about this build but it's not mine and I saw it run. Good enough for me🤷
@@ronnieboucherthecrystalcraftsm He uses a brush and puts lube on all the bearings before installing the cam
@@TheHorsepowerMonster I use that thick Lucas oil on mine
@@TheHorsepowerMonster people are used to seeing that blue purple or black assembly lube.
God bless the man doing all the manual work there coming to an end!
Love it!! Your a great commentator!!
Videos are class!!
Thanks for the kind words! And thanks for watching
@@TheHorsepowerMonster I find your videos more informative than power nations. Top stuff bud!! Keep it up!!!
@@TheHorsepowerMonsterhi
I love Motion Race works.
They have awesome customer service and are always there to help when I run into snags. They’ve saved me by staying open seriously LATE just to overnight me a part.
Best guys in the business.
Nice build. The blower belt tensioner needs to sit closer to the middle of belt path to reduce the belt slap.
Not my first comment but it’s great to be giving all the measurements and spec’s. And learning about the LS upgrades because the only American V8s I have built were for Cup cars. I have a specialized shop and just work on BMWS and I still will go over to the race shop and use the equipment in the motor room to do stuff to the cars I’m fixing. When I worked at Jimmy’s I mainly did engine assembly and dyno them. I stayed in racing from 1994-1999. I had a great side business of working on BMWs when I worked there. After I got enough to build my shop I quit the racing world. I have tinnitus from being around all those screaming motors, only time we wore hearing protection was when wearing a head set when the car was on fire track. I can’t believe we were that dumb because all the old timers were usually def in 1 ear from tuneing on a race car. Now I’m in my 40s and ears ring like a bell.
This build is perfect, it's going to be super cool in an airboat. I love the look of old-school superchargers, if I had the money I would build the same thing
Wow! That is one heck of a build! Thanks for sharing
Another great video, Jeff! Great work! Thanks so much
Found your channel subbed because the way you give the info and talk reminds me of the old hot rod TV shows my dad used to watch and I loved watching them even if back then I never understood any of it lol
Thanks for the sub!
Uploads like these provide a good chuckle.
Awesome, before watching my guess was a jet boat built for watersking
I love this... Blowers are my favorite!!
Love old school blowers and the look awesome
We do this all the time here in Australia just too do skids that's our stock standard go to build for a not to expensive burnout car build or some of the guys with big money are putting big blocks with 14/71 blowers 2500hp just to burn rubber and do it under 1min that's the aim of the game 🤜🤛🇦🇺
That 8-71 is such a cute little thing.
I have not seen a blower setup on something modern. It's been a really really long time but it goes to show you some of the old school tech can still do it with the right match ups.
Nice job guys!
Thanks!
I love these LS engines!
Another well articulated technical video! Absolutely outstanding Channel, keep up the great work!
Thanks a lot! It's always nice to hear positive feedback! Thanks for watching
I need that motor in my 1980 camaro
That thing is massive!
This engine is a sexy beast as it even whistles at itself! 😃
I miss the old days, although new tech is nice! Great job!
Beautiful setup.
Thank you, great video and attention to detail. Glad I found your channel.
back in 75 my friend ran a 611 blower on a LS 6 small block one fast car but it was one expensive engine but he had sponsors pay for it pretty sure they owned the car he use to do a lot of west coast racing
Honestly after I watch your latest video I am steadily looking for your next video I think you put out the best content . Great work man .
Awesome! Thanks for the kind words, and thanks for watching!
It was cool to see the boost pressure fall around the torque peak due to increased volumetric efficiency.
Had to shut RUclips down when they showed the beginners drag queen commercial. Cool video. Too bad I didn't get to finish it.
That thing is ridiculous.
I need one...
Beast mode👍🏻👍🏻
Someone came to party !!
First guess only true southern air boat flyers Sweet 👍!!!
That is a beautiful creation from someone who has a love and a passion for creating perfection in motion! To think that thoes pistons will be rotating thoes valves opening and closing all of thoes pieces moving at 3000 to 5000 revolutions and minute for hours on end for years of getting abused ran hard and left to rest only to get beat on for hours and year after year.... only the best can build the best
Amos Moses doesn't need one to get around the swamps,
But I'm sure he'd love to have one.
Might of been mentioned but shouldn't a belt tensioner push inwards after the blower pulley? Usually tensioners don't ride on the belt's teeth. They ride on the flat side of the belt as it is smooth. The current setup might also shake the belt even more by riding in the teeth and possibly cause premature wear.
That's pretty much how all blowers are setup so apparently it works.
Great video
Thanks a lot! And thanks for watching!
I love this build
Gotta love an old Roots
I absolutely love my blower motor!!! 890 hp!! In a Camaro!!!
I bet that's a blast to drive!
Do you 572 they in shop
Jesus this thing is going in a boat!?
That's insane!
Great video bud
Thank you very much! It's always nice to get positive feedback. Thanks for watching!
Your welcome, I enjoy the blue print and assembly process of an engine build and you capture it perfectly
Totally cool do more of this please
Will do! Thanks for watching
I love old school blowers
I’m Australia this is so common look up Summernats and just go hard
@@rondoanderson usually an alcohol fed smaller big block being revd to the moon.
Typically a mid 460 cubic inch with a 14/71 blower being revd out to 7500+ rpm. Because it runs on alcohol it can do that for 2 minutes (or more) without overheating.
@@slysithejuicegy meth?
@@dasnicenoob6140 the OH variety or crystal?
@@slysithejuicegy methanol 😂
Out in the swamp I think I'd want a pulley on each side of that belt to stop that radical belt whip.
OMG that's too awesome! Looks like a great build for my jet boat!
that is a awesome build
Nice build , that's a lot of power
turbos are fine but blowers make beautiful noise
Awesome Build! Did anyone else see a bit of belt slip on the overdriven run? Looked like it was riding up on the upper pully in some frames...
The belt did look loose to me also...
I would love to see a high RPM LS build maybe with solid lifters
quality build
Hell yeah motion raceworks I was literally going to comment if you guys can you them. By the way almost everything that comes from motion is billet
Airboat seems like a perfect place to use turbo's rather than Roots blower. Propellers work most efficiently in a narrow rpm band where turbo's would be most happy to run....and the instant response from the Roots won't be as significant as with a car. Turbo lag wouldn't matter and they'd make more power at less boost with cooler intake temps. But I understand the owner wanted the visual impact of the Roots...and he got what he wanted in spades! One question: How long is that blower belt going to last flapping around like that?
An air boat absolutely needs the instant throttle response that a roots blower gives. Turbo lag would SUCK on an air boat.
I don't care how inefficient roots blowers are, they will always be sexy as fuck.
Great videos love the explanations and especially the dyno runs!
Destroyed my ears 15 seconds into the video. Thanks, the new channel I've never heard of before.
HELL, I wanna see the airboat make a run with the motor in it.
Hope the cleetus crew watches this video for the Blazer build they are under taking
HE PUT THE LIFTER IN DRY, GEZZZZZZ BROKER
Not exactly, he lubed the ID of the lifter bores with a brush before installing them.
Oooohhhh booooyyyy
Boost makes things better.
Intercooler is probably made of coopernickel. Same thing used in good geothermal furnaces.
Pretty cool!
Hell Yeah Brother!!
Woooh thats a whole lot of belt
I would love to know the total cost of this build
Nice build
Love it.
BDS is great for an old school 8/71. The money is on The Blower Shop high helix with hard anodized case and teflon strip triple lobes. 60% more efficient than the original twin lobe. A blower shop 8/71 with intercooler could likely hit 1100 on pump gas with higher efficiency and cooler air.
and will need to be restripped adding maintenance and cost. The air for this will be really chill, since its a boat I would guess they would just pull in freshwater for the intercooler but I am not familiar with airboats.
8- 71 blowers are 3 lobes per rotor!! Detroit diesel did teflon strips on lobes ,yes they sealed better but the drag equaled the air loss 0 -0.
I've never seen a 2 lobe 8-71... 🤦🏻
He's using stepped diameter header tubes. Interesting.
They are 1 3/4 inch to 1 7/8 inch diameter, just fyi. These are Prestige's standard headers they keep in the dyno for just about all their LS builds. Thanks for watching!
Why is the blower belt tensioner tensioning on the cog side of the belt vs the smooth side? I mean the tensioner pulley is smooth wouldn’t it make more sense to run it on the smooth side of the belt? And maybe a shorter belt to reduce the belt slap?
Since the engine is visible, paint lettering on some of the parts, using a material that glows when heated. If the customer is a Lord of the Rings fan, the lettering could be Tengwar -- writing only revealed by fire. :-)
He needs all that power to escape the giant anacondas in Florida.
It's easy to slide the cam in because the lifters haven't been put in yet just open hole