I Said This 75-Year-Old Chevy Would NEVER Run Again, Boy Was I Wrong!
HTML-код
- Опубликовано: 6 сен 2024
- GIVE THE GIFT OF A TFL T-SHIRT! You know the truck and car lovers on your list want one. (www.duckco.com.... On this episode of TFLclassics David takes us through his 1945 Chevy ton and a half. This truck is all original, and looks like it has seen it's last days. David insists this truck is capable of running and driving. Let's see if he's right!
( / tflcar ) Visit our Patreon page to support the TFL team!
Watch more videos from TFL Studios:
The Fast Lane Truck ( / tfltruck )
The Fast Lane Car ( / tflcar )
TFLoffroad ( / tfloffroad )
TFLbike ( / @tflbike )
TFLnow ( / tflnow )
TFLclassics ( / tflclassics )
TFLtalk ( / tfltalk )
TFL Podcasts:
TFL Talkin' Cars Podcast ( tflcar.libsyn.... )
TFL Talkin' Trucks Podcast ( tfltruck.libsy... )
This is one of the things that I even feel proud of the Americans even though I'm a Chinese. Factory workers who built it probably never imagined that it's still running 75 years later in 2020! Just listen to that smooth start up at 2:16, amazing truck!
They had no concept of "planned obsolescence" back then.
After 10 years not running... eheh i didn't move my 2010 in a week and i felt it... ahah
Aren't you supposed to double clutch if it a transmission doesn't have syncros to avoid?
Yes sir just takes practice basic driving skill 70 years ago vin diesel meme today
It was way under stressed. Back then they designed it to be easy to fix but not all that reliable. Today cars are really meant to run with zero maintenance when back then you did a lot of immanence.
Less down time than your new Defender.
Ouch!
haha good one!
🎤 drop
😂🤣😅😆
Solid BURN!!!Scroop the Defender!!
Tommy: "Have the heads ever been off????"
Everyone: "It's an inline 6....there's only one head"
Beautiful truck
If you don't appreciate old metal, you aint a car guy
But id kill for a ww2 powerwagon
Proper double clutch procedure: Upshift: Press clutch in low gear, shift into neutral, press the clutch again and engage higher gear, without hitting the loud pedal. Downshift: (this is trickier) Press clutch, shift into neutral, stomp on the gas to match gear speed in trans, Press clutch again while revvs are still up, and off you go.... once you learned it, you can drive every vehicle. ;-)
The ole double clutch! Lol
@@stout_tossme7541 I tried double, triple and quadruple clutching. I just need some practice ;) -Tommy
Once you get the hang of it you can drive a manual vehicle without using the clutch pedal :)
@@TFLclassics props Tommy. Seriously cool and what an experience for you (as a young whippersnapper) to drive that awesome old truck.
@@tomcardale5596 I'd been driving trucks for 20 years, self taught floating the gears without using the clutch. Got a job that paid for me to upgrade my B to an A at a truck driving school, it was fun to learn the by the book way..clutch to neutral, clutch to gear.
David has been such a good find for the channel. Always a good video at the yak ranch.
100% yes. David is a great addition
He comes across as a super nice, upstanding type of guy!
David is an absolute LEGEND!
Tommy got to drive a piece of history.....
You should take it to the local Chevy dealership and get that master brake cylinder checked out :)
@@wildbill23c It'd be so funny though.
Figure that master cylinder is out of warranty yet?
@@Theywaswrong "What do you mean you can't fix it? You built it!"
I once drove a 1949 Chevrolet 3800 pickup (1 Ton) with the same 216 ci engine back in 1977. A couple friends of mine back then had one that their family used for hauling stuff on their country property in Minnesota. The paint had lost its shine and a rusty patina had begun taking over the finish. No rust through the body anywhere though. Everything worked on it and at over a quarter million miles, the thing ran like a top and started right up even on subzero Minnesota mornings. Built like a tank. The slowest vehicle I have ever driven but also the most fun.
Love these videos with David... Such a cool dude and everyone seems to be having a good time.
Y'all definitely need to keep making videos like this of older vehicles, the reaction of Tommy and how the workhorses that built America is priceless.
Can David adopt us all. Found my new favorite RUclips dad!
Love this one guys. My grandfather had the same old Chevrolet flatbed dump truck when I was a kid we used to play in and on. It was the first vehicle I ever drove at about 12 years old. Watching this brought back great memories.
"This is the most fun I've ever had behind the wheel of anything." That says it all right there.
Not far off the experience I had driving a Ford Model A truck
We have a functional, restored 45 Chev 2.5 ton. No chrome. So cool to see another one running - very rare! Double clutch to shift em smooth like a heavy truck. Have fun!
In WW2, the British used these trucks in the desert with their LRDG (long range desert group) fighting the Germans behind the lines. These truck were known for reliability.
They had some very large balloon tires. They might have been Canadian trucks as they built a lot of Chev's during war.
@@yorkchris10: I believe you are correct Chris
I knew a Spitfire pilot that said he saw a Maple Leaf on an engine casting on a truck motor. He said it was good for moral, but I don't remember the vehicle.
Their life expectancy was like 90 days in the war. As a civilian 90 years I suppose :)
YOU HAVE TO REMEMBER PEOPLE THAT EVERYTHING WASN'T ALWAYS PLASTIC!
THERE WAS A TIME WHEN THINGS WERE MEANT TO LAST
Yes sir they were and still are nothing like old iron!
My 90s toyota has a single piece of plastic, nothing will kill this little thing
Chevrolet produced its first V8 engine in 1955. That was the 265 Cubic inch engine. The engine was actually designed by a engineer from Cadillac. And the earliest engine’s in 1955 did not have an oil filter.
I have a 58 F100 and the oil filter was a factory option. I believe it cost an extra $10.
@@travisb9130 the early Chevrolet. 1955 265 ci engine there was No oil filter option. The engine was actually designed without an oil filter. The filter was added as a early production change to the engine design. Up until 1955 Chevrolet only had the 235 Ci straight 6 cylinder engine. people called that engine the (stove bolt 6). Great engine couldn’t kill it.
I love a vehicle with a good story behind it.. if you have a binder for it you know it’s good
Love the sound of those old straight sixes!
11:26 "The steering is super light". Hah, hah. It's probably about 63-1/2 turns lock to lock.
And you forgot to add the fact that it takes one hundred yards to do a U Turn lol. I have the same truck and had to pull it out of the barn the other day. You look like Austin Powers trying to get it maneuvered into a spot lol.
@@benvanderkinter2204 tell one of those bearded hipsters to park it at a smoothie bar 😂
The steering is about 3 turns lock to lock, it maybe light but always hang on! Hitting a pot hole or rock can ripp the wheel out of you hand. I know from 50 plus years of driving our 46 Chev
This would be an awesome project truck if you have the money. I'd absolutely love to see you all restore it.
*driver door flies open*
Cameraman: 👀👀👀
Yeah the door flying open made the vidio 4 sure,,,!! Lol loved it,,,!!😉
Kudos for the cameraman!
I am sure he was hanging on for dear life during those window shots!
way too reckless
That was fun. I just parked my "46 Chevy "potato barrel" truck. I picked the truck up from a local farmer in 1991. It has a later model GMC engine. I fixed the cab up some and rebuilt the flatbed body. I bring the truck to local parades. Many watching the parade really enjoy the truck, especially those who had worked in the old-fashioned way of potato harvesting. The front tires are newer but the rear dual tires are original. The rear tires have the parallel tread like those on military vehicles. Your driver might have had less grinding of gears if he paused when in neutral while shifting to a higher gear. Oh. not only do you have a nice truck but you also have a nice red flannel shirt. I found my red flannel shirt on the road in front of my house.
3:05 lol the hand in the window
Grind 'em 'till ya find'um!!
Can't finder grinder
Awesome truck. It would be so much fun to drive it around. Glad Tommy had a chance to drive a peace of history.
Thank you Tommy. Love the truck. You didn't point out the airbags, navigation system, mp3 player. What homeowner doesn't need something like that around to run errands on the weekend? Great scene, sunshine, a good plot of land, living the dream. Guessing he spends less money on maintenance then your new Landrover, BMW i3, or your Mini's.
"Honey ill brb going to the store to get milk & bread "
Gets back needs a nap.
That Truck is better quality than the Defender
I learned to drive on a 41 dodge pickup with crash box and 4 speed. No hydraulic brakes either. Boy does this bring memories. Driving in the North Dakota Badlands.
Love this video!!
I used to drive an old truck similar to this while growing up farming. This is amazing.
The air "filter" looks like an old oil dipper.
Thank you. Memory lane. Started to drive at under 10. I was tall so it helped. We had an old Merc v8 grain hauling truck back in the 50's and 60's until it caught fire. Hand cranking it as a young kid was tough. We called low gear bull low and trying to shift with a load on a soft field was a challenge. Replaced it with a new International with seats that were not sagged out and electric start. Also had an old Chevy hauler with a 6 and electric start which as a kid I found easier.
It's funny when people talk about old trucks like this and say "you don't need seatbelts, this thing is stronger than 90% of everything on the road". Just because the truck will probably survive doesn't mean you will, after you pick your teeth up off of the dash.
Those Chev’s were used by the British LRDG in the western Desert in WW2 , 2 wheel drive, oversized ‘Sand’ balloon tyres , my Dad said amazed how they’d run through soft sand 👍🏻😎
The cab is the same as the military, it just has different front clip.
It is a “stovebolt 6 engine. The GMC trucks had a different engine, which had pressure lube on the crank. The stovebolt 6 had dip and splash system.
This is quite similar to the '38 Chevy grain truck we had when I was young in the early 1960s. We would haul grain, even cob corn, and sometimes haul a tractor in the bed of the truck. I taught a neighbor kid to drive a stick-shift in that old Chevy. Once parked, thieves cut up this truck for the scrap value of the steel and left only the skins from the cab and front fenders. We frequently drove this truck from home to one farm 60 miles away. We didn't always keep up with traffic but it was not a road hazard on the highways either.
That is soooo awesome! I love old trucks. Those old straight 6 chevy motors are bullet proof and last forever. Love the content keep it up
Great American history. Thank you David.
I have a close family friend who restores military vehicles for a living, he has a CCKW that he can shift without the clutch, and I have never once heard him grind gears.
Sweet truck! Reminds me of the 41 Ford I used on my grandpas farm. It was about in the same condition. I learned to drive it when I was just tall enough to reach the pedals.
What a treasure! Had me smiling the whole time. I'd love to drive an old beast like that
That old truck is great just like it is thank you for sharing
Isn't it amazing what you could do with an old Stovebolt 6?? You've got to do a feature on his '62!! It looked like it was probably a C50? I'm sure curious what or who in St Louis had the truck...great feature!!
My dad had one of these back in the early '60's, no dump bed so when we went to the grain elevator there was a lift that'd lift the front wheels about 5 feet off the floor so the grain would flow out the back. When we used it to bring grain from the combine to the granary it would let about 1/3 of the grain flow out the gate, after that you had to push the grain toward the back with a shovel. He upgraded to a '57 Ford with a dump bed maybe '68 because the Chevy wouldn't start reliably due to the distributor shaft bushing getting so sloppy it affected the timing.
Love these old trucks. Brings me back to old trucks I’ve driven in the past.
This is AWESOMEEEE!! Guys I have been following your channels for a year now but never have I ever commented before. But this beautiful machine and it’s owner have forced me to. I am one of those persons who loves old machines and boy o boy did I enjoy this video or what. You know what, you should do more of this and bring us more old trucks and stories behind them
I had an old 51 Ford 3/4 ton flat bed. I bought an 8 volt battery and it worked so much better than a 6 volt and wont hurt your gauges, lights or starter.
Had a 57 here, 235, 4 spd, 2 spd rear. It used to be a dump bed but cylinder and pump removed. Got 19 mpg on the highway and would just reach 90 mph. Those split rims don't need a press, if they're too wide and don't want to hit the groove, just clamp one end and pull the other inward, most are decently soft. Things aren't going right with the ring going up into it's groove, let the air out and start over. If you're trailer hauling one that the tires keep going or are flat, band or strap around those wheels, the road motion will make them work loose, those rings rolling along at 50+ mph are no joke.
Nice old truck. My grandfather gave me a 1946 1\2 ton he drove till 1975. I still have it. This video brought back a lot of memories. Thank you
This brought back memories of my childhood on the farm. Our backup truck was a 48 International. Driving that thing 15 miles into town with a full load of wheat was a blast. It would do the speed limit empty, but it had a 5 speed and a 2 speed rear axle. Had to double clutch that thing too. The hoist was a single action though so it was power up and gravity down. had to make sure we loaded it up front first other wise it would flip the bed up and dump. Had a farm hand who forgot that and dumped a couple hundred bushel of wheat on the ground. That old bright yellow truck is still on the family farm and running. Not used for much anymore but still runs.
Great video. I have the Canadian 3ton Maple Leaf version. All original and front grill is all chrome. Bought from the original owner who used it to haul gravel to the Calgary International airport in 1950😊.
its amazing to see this vehicle working after all those years
My father built a wooden camper on the back in 1950 on our truck just like this one but with duals on the back and we moved to Washington state. I was 3. My older 17 year old brother had to overhaul the engine bearings.
That thing is awesome, love seeing old steel like this still running
Double clutch it men. Also I did a break job on my 46 ton and a half just like yours. Got most of my parts from Jim Carter parts . Love that sound.
Ah, the memories. My brother had a 53 GMC. No brakes so downshifting was how I slowed it down. Shifting? I found that patience and moving the shifter with my fingers instead of my arm resulted in smoother shifts (double-clutching helped too). David's split rims are nicknamed 'widow makers' for a reason. Great video, guys. Thank you so much.
I’m jealous! That looks like so much fun! I can’t believe this truck can still drive. So awesome.
I enjoyed it. Still runs like a champ. And although it tops out at 35.5 mph best for off road and small roads with low speed limits 😎
Need to teach him how to double clutch. :-) My uncles had a 42 Ford 2 1/2 ton on the farm, it was a cool old truck.
Nice!!!!...but who's hands keeping the door closed on Tommy's side!??😁😄😃 Awesome episode!!!
Oooo creepy, just saw that
Creep City!
That’s alex, our videographer. He was holding on and riding on the running board
My first vehicle was a 1953 Plymouth Cranbrook with three on the tree and a straight six with 140 house when new.
Was yours a coupe?? Because I own a 1953 Plymouth Cranbrook club coupe. 218 flat 6 I wish they made 140 HP lol. It's sadly only 100 HP
This is one of the best videos I can remember you guys putting out in a looooooong time
Those trucks starting in 1941 all big trucks were all 235s for the extra torque. Only the cars and pickup's up to1 ton came with 216. Those 235s had the same oiling system as the 216 but they were indeed 235s. But in 1954 to 235 were updated and the 216 got dropped and the 261 was born. The 261 was a bored out 235 with a Corvette cam and it made good power
I've got an old '72F150 with those split rims. They're factory. I'm old school so I mount my own tires. These aren't as dangerous as everyone thinks.
You don't have to press them in, use a shop hammer just like stretching a semi tire over the bulge point. (This part may give you blood bruises till you get the hang of it.)
Then put a chain, looped through the wheel around the tire on two sides. ( Not too tight, leave slack to inflate.) Then inflate the tire with the ring centered equally. Use a long handle inflater, or a click on, so you're away from the ring if it comes off.
I always beat the tire after it's inflated, before I take the chains off. I use a long handle sledge and go around both the tread and sidewalls striking fairly heavy blows. This "seats" the tire.
I've been doing these for over 50 years, and never been hurt. (I worked a truck stop for a while in my misspent youth.).
I think they get a bad rap from being in poor condition and rusty.I wouldn't push it to much more than 35 lbs of air in one either.
I drove my grandfathers 26 chevy farm truck on the farm at 8 years old. that truck hauled everything and never broke down. when it finally go sold in 1960 because the mechanical brake system was shot. it had 68k farm miles on it. with the dual wheels and overload springs we would haul as much as 5 tons of soybeans.
Listen to those gears whine!
Oh, the memories...
My father had a 1946 Chevrolet truck, I remember the sounds from the gearbox very good !!!! I live in Holland
That vehicle is awesome
This truck is so cool! Nice to see something that was built in simpler times.
The first thing I looked for, is the registration wrapped around the steering column? Hard to tell, maybe. That's one of my memories of riding in the cab of one of those old real trucks.
this is so cool! my uncle had a Mack from the same era. it didn't run, but I played in it alot when I was a kid. I even learned to drive stick in it. and because of my playing in it and working the pedals, the brake pedal still had good firm pressure to it.
Love those 41 to 47 Chevy's. Beautiful trucks
Tommy needs to learn how to double clutch on the shifts. lol.
Awesome truck!! Actually, the 235 came out after the 216. Love these original old trucks.
Great episode Tommy. I have modestly restored my Grandfather’s 1944 Ford grain truck which he had bought new in December 1944. Flathead V8. This truck reminds me a lot of my Grandpa’s Ford. Thanks!
I love that truck. I had a WWII 3-axle GMC for a few years. It was a great piece of kit. Inline 6, 5-speed (non-synchro of course), selectable 6x6 on the fly, same floor-mounted starter button. Easily did 65 mph even though there was a Max Speed 45 MPH warning stencilled onto the tail gate
I just love to see these old trucks being used for what they where made for! Thank you!
That ninety horsepower was at the flywheel. It dropped to forty five being generous horsepower at the rear wheels. I bought a thirty six model and it was only thirty five horsepower to the rear wheels. It was a first year hydraulic brake, and first year 216 as the year before was a 205 cubic inch according to the Thomson engine/truck manual. Yours had moved to steel in the door posts I believe. Mine were wood and on the way home with my prize, the door fell off onto the road. The whole A pillar had just come right off so the other I gave it a tug and it was on the part of a bed on back. Believe it or not, I hauled firewood with it and could haul a cord and a half on it.
That other knob on the dash was definitely NOT 4 way flashers. It is the heater rheostat and glows when you turn on the heater.
The tires give it away! That old boy still works! The 216 is a babbitt bearing motor, but had a good service life - obviously at this age! The "Backyard Alaskan" channel is fun to watch for this kind of content.
wow, what a cool old truck. I love the sound of that old straight 6. Glad to see a truck like that still running.
Avoid grinding gears by double clutching. To shift out of any gear push clutch in and pull out of gear let clutch out, push clutch in and shift to the next gear. All trucks prior to a certain year works like this.
Free life lesson. Never question if an inline 6 will run. Best engine configuration to date.
Awesome! Thanks for the ride.
Crazy. I owned a 1969 m35a2. Only 24 years newer. It liked to be double clutched.
My Dad had a '47 1 ton. same body. 9 foot box. That crank on the dash wound up the windshield. Nice on a hot day.
Nice video. Nice to see one still in original condition and being put to good use. The engine sound like it was in great condition.
6:03, left upper corner
That‘s one dedicated camera guy!
Love it. No computers, no def. Just drive
I have an orig. Low mile 47 216 I may put in my 54 150 2 door.Water got in the orig 235 while sitting in the woods since 1968
Those old survivors are cool to see still running. This ones survived being a furniture and farm truck during it's 75 years thats real hard on them, I fix the newer ones that get a beating on the farm. Then a kid gets in it that's about a 3rd of it's age and puts more wear on the transmission in 10 minutes than the 75 years previous L.O.L My guess is trucks and the old tractors like these and up to the late 80's will still be running when they are over 100 if we can still get fuel and find a guy smart enough to fix or make parts for it. All this modern stuff with computers and fancy injection systems will be long gone, I fix 20 year old tractors to that are junk now and parts are starting to be obsolete. some of the trucks trucks aren't any better for parts either. ! Thanks for sharing the video with us ,take care.
It you take a rag and gallon of linseed oil and rub it all over the cab it will make it look fantastic it will bring out the paint and letters on the door will show up nicely. Many people do this to their old iron to make them look good. No it dont get rid of all the rust but preserves it from rusting further but looks great try it.
Tommy's exuberance is very catching, glad you got to drive a real truck.
I never had a chance to drive a 45 but I did drive a lot of old three and five ton trucks with no synchro's and no power steering , one of which had those damn old split ring wheels . Brings back memories .
Ok, that was cool as hell. I spent the entire episode grinning like an idiot. LOL. Lots of fun to watch that.
grinning like a mule eating briars
Drove my grandads 53 Chevy flat bed around for years with the blue flame 6, 4 speed. We pulled boulders, stumps, etc out of the fields in granny low gear with that thing. It hauled watermelons around everywhere that we sold for 25 cents each. Every winter we hauled wood at 5 dollars a cord. We use to "double clutch" because those transmissions do not have synchro's.
Double clutching is the key to driving without synchros. I learned to drive in a 51 International. It was a lot of fun
double clutch how to from a truck driver clutch to neutral clutch to gear on the upshift, now the down shift, clutch to neutral, rev, clutch to gear....takes a bit to get used to but it can b done.........now if u can figure it out u can use the rpms to shift the gears and only use the clutch to stop and take off with (aka floating)
Looks like the type of daily driver I’ve been looking for!