FLEXISPOT Standing Desk Unboxing and Assembly
HTML-код
- Опубликовано: 11 апр 2020
- I bought the Flexispot standing desk from amazon. It was listed as an electric height adjustable desk for the home office where you can sit and stand. The desk I bought was the 48 x 30 Inches version. It came with a Whole-Piece Desk Board for the top. This desk is the E1. In this video I unbox the flexispot standing desk. Then assemble the flexispot standing desk.
Buy on Amazon amzn.to/3auhwVe
As an Amazon Associate I earn from qualifying purchases
Home Office Table Stand up Desk
Basic Model SanoDesk
Grey frame and Mahogany top
Standing desk
#FlexiSpot #StandingDesk 
Хобби
I literally just completed putting this desk together and you've no idea how helpful your video was. The instructions in the box were horrible and you literally saved me. Thanks a million. Great voice too.
Great to hear!
I feel the same way. Thanks kc70.
Same here....bravo and thanks a million!
Best Assembly vid ever seen !! 💪
they should sponsor this video!! this was so helpful!
thanks!
Totally agree, lockdown desks assemble!
Thanks for your video, really useful to watch prior to assembly.
Im going with my own custom mdf build but the leg instructions are very good.
Totally agree! I bought a different model but this video helped a lot. My crossbeam was either too long or my transmission rod too short. I had to remove the washer from the transmission rod in order to fit it and make it work.
Thank you for putting this video together. I was frustrated assembling this and your video helped tremendously. Wished I stumbled across it sooner.
Thank you so much! This thing has been sitting in my corner for the last few days cause I thought it was going to be a task. Had some time on this beautiful Sunday and got done so fast I had some time to relax lol Couldn't have been possible without this video. Super simple and even when I hit a rough spot (attaching the height adjustment remote and the electronics), I was able to see how yours was aligned and trouble shoot it.
I was about to rip my hair out from the terrible instructions, then I found this video. My hair thanks you.
To your hair I say, you're welcome.
kc70- WE LOVE YOU! This video literally saved our marriage! LOL! The printed instructions are so blah- but your detailed video walked us through step by step and we got both desks done with time to spare for Saturday errands! THANK YOU!
Great to hear, thankyou for the kinds words.
Thank you for the tutorial!! Showed everything you need to do.
*Just like you I didn't use the adapter holder. I had no idea how to attach it so I just used a small velcro strap and cable tie.
Thank you for this video. It has a HUGE help in putting together my sister's desk. Flexispot's video was useless and they didn't bother to return our call asking for assistance.
Glad I could help.
Excellent video. I was having issues with the crossbeam spacing and watching this video made it so much easier!
Thank you for this great video . I spent 3 frustrating hours working on this desk and the control box had me totally baffled. Wish I had looked for your video before I started it would have made life so much easier.
Glad it helped!
Extremely helpful, thanks! Manufacturer instructions were pretty much a waste. I watched this once, then spot checked a couple of points by going back to this video during the assembly process. Result was a great standing desk that my wife loves.
Great to hear!
Big thank you seriously!! Saved me from a stressful weekend afternoon. I followed your instructions and it only took me an hour or so
Great to hear!
Great video! Very easy to follow. Made for an easy assembly! Flexispot now includes an adapter holder but we didn't note where it went until we had the table top secured. No big deal as they included the sticky cable ties too.They should make their directions as easy as your video! Thanks so much!
Thankyou for the kind words!
You should get an Oscar for this. It made it all so much easier.
Haha I wish that was possible, that would be a funny sight to see
Thanks a lot. Life saver , I did not get all the parts in first delivery. not even in second delivery but this video helped me figure out in advance
This video will be great for my dad to watch while he builds it on his own! THANK YOU!
Thanks, I hope he likes it 😀
I just assembled this desk tonight along with the monitor bracket and under desk drawer. What they fail to tell you is that the desk drawer will stick out from underneath the desk because there is not enough room for the bracket underneath the desk as the center bar under the table is blocking it. Other than that, it took me about three hours to build the desk and I am thankful that I had power tools to streamline the assembly.
now that the desk is all together, I am relieved and very satisfied with the overall quality of this desk.
This was fantastic! I had no idea where to start and this video was extremely helpful. Thank you for making it!
Really helpful, many thanks for this nice clear video, helped me a lot. Apart from anything, it's nice to watch the whole thing before assembling, then watching section by section as you do that.
I just put my desk together with your directions and it turned out great 👍 Flexispot owes you some 💰 my friend. Thankyou so much. If I could hug you I would stay blessed.
Thankyou for the kind words I'm glad I could help.
@@kc70 Ok, since a woman tried it and it worked am going to give it a try too. I dislike assembly so hope it works out ok
Agreed! I mentioned your vid @kc70 in the review I just wrote on Flexispot. I will say, there were pre-drilled holes for my controller, yay. Thank you!
Thank you for this video. I followed your instructions exactly and was able to set up my desk comfortably without issues.
Excellent!
Excellent video. You're right - not sure why they don't pre-drill the beam holes.
Thanks bro I didn’t even look at the directions I knew that I could find a better video online
Glad I could help
You are the mother effin truth! I didn’t even bother reading the instructions! Haha you got me from start to finish, I appreciate you. I left your link in my review on Amazon, hopefully you get more views!
Thank you so much for the video! The leg without the motor was defective so I had to wait another week to assemble everything and if it weren’t for your video, I would have definitely lost my mind. Your video should be sponsored!!
Thankyou for the kind words. Happy everything worked out.
Thank you so much for this video. I just finished putting this together. If it wasn't for you I would have never got this done!
Glad I could help!
Very comprehensive and clear instructions. Thanks!
Very smooth video, adapter bracket added for my table, but everything else basically the same...great job!
Best installation guide for flexispot on the tube.
Thanks man, life saver ! Tried with their instructions first and was just lost.
No problem 👍, glad I could help.
Nicely done! great job with step by step instructions! thank you!
Thanks a lot! I bought a different model but this video helped a lot. My crossbeam was either too long or my transmission rod too short. I had to remove the washer from the transmission rod in order to fit it and make it work.
Glad it was helpful for figuring out the issue you had.
Thank you, this helped me assemble this desk right!
Amazing video! You could not have explained it any better or made it more simple! Ty
Great Video! Clear, calm and methodical. I would totally nominate you to make the emergancy audio announcements simply based on how calm and clear your instrcutions are!!! And I love my new desk!
Thankyou for the kind words and I'm glad you are enjoying the desk. It is very helpful for stretching out during the day.
@@kc70 Working from home has irnonically lead to more "desk time" and its taken a toll on my back. Now am able to move around more and even dance a little while writing mails and creating content.
That was awesome. Thank you so much!
This tutorial was a huge help. Thank you.
Extraordinarily helpful. Thank you.
Excellent instructions. Thanks, since they didn't come with my table.
This was so helpful! Thank you!
Thank you, very helpful. The provided written instructions leave a bit to be desired.
This was such a helpful video! Thank you!
Oh what a life saver you are! :) Very well documented.
Awesome instructions, thank you!
Thank you! This really helped
cheers thanks ,that just convinced me to get that desk
Thanks for this great video!
Thank you sooo much!! So helpful!!
great! very clear. Thank you
Bravo! Thank you for posting this as it was so helpful.
Thanks, glad it was helpful.
Such an awesome tutorial, thank you! I am looking to buy this desk and assembly was the deal breaker!
Glad it was helpful!
Very nice video, thanks!
Omg thanks for making this video! Your video was a tremendous help.
You're welcome!
Super helpful. Thanks brother!
The instructions were whack so I'm super thankful for this video! Also yeah why don't they pre-drill the holes for the middle support?? So weird. Thanks for your work on this!!
Thanks for this video dude, super helpful!
Glad it helped!
Thank you so much!!
Very helpful. Thank you.
Thanks! Very helpful!
Glad to hear it!
Thank you! This video is very helpful.
You're very welcome!
Excellent job! thank you
Thanks!
IMPORTANT information and suggestion. My table did come with holes. However, it's too hard to get an exact measurement. I tightened the ends of the beam to the legs and I loosened the bolts in the middle and stretched it out. However, I didn't tighten them. The next step, I attached the transmission rod to the motor and slid the other side in after loosening the middle bolt. I did tighten the rod screw but I did not tighten the middle bolt. Then I placed the table upside down and then I put the legs upside down on the table. Because I didn't tighten the middle screws on the beam or the middle bolt on the rod, I was able to make adjustments as I needed to line them up with the holes in the table. I didn't have to worry about it scratching because it had rubber inserted at the end where the screws go for you to bolt the legs to the table. Also, it is worth mentioning that this table is fairly heavy. Most women will need some help. It's also worth mentioning has you to put the controller on the left side. However, you can also put it on the right as well if that works better for you. If you are putting it in another room, I suggest that's where you put the table so you don't have to worry about trying to go through doors with it. My table was 48' by 30'. I made that mistake and had a time getting it through the door in the next room. My wife has started to work from home and she loves it.
Perfect. Thanks
Good video!
this was helpful thank you! you should be sponsored!
Thanks, I wish
Very helpful and nicely explained
So lame if we have to drill holes ourselves.
Edit: mine came with pre dilled holes and they were perfectly aligned. Love this desk!!!!!!!!!!!!!!!
I agree, seems a quality kit and yet the lack four holes means unqualified punters need to seek drills that they don't have and can't use even if they did. How many have drilled right though and then sought refunds?
Just got it last week, and didn't have pre-drilled holes for the beam to desktop.
Very helpful video! They now have an adapter holder that goes under the horizontal support structure. Misses that because once the support is fixed, the adapter cannot be attached!
@Prachita Mane did you purchase this recently? how has been your experience...?Thanks
Thank you
Very nicely explained. Thank you 🙏
You're most welcome
Nice work
I just assembled mine. I almost tossed part # 11, the adapter holder. It looks like you missed yours. That small metal part holds the adapter in place and is attached to the main beam. You found a good solution to keep adapter in place though. Thanks for the vid!
I would not have been able to make this work by simply looking at the paper manual.
I’m having the same issue. Should I just toss part 11 and just use the cable tie?
It’s impossible to attach that part after the desk is assembled. There are no holes on the beam for it to screw to. I think I’ll just use the white ties also
Same issue. Ties will work for now since underneath desk
I missed mine during the assembly and didn't notice it until I had the table top attached to the frame. I was able to undo the four beam screws (like at 5:54) and slide the middle part of the beam out of the way and slide the holder onto the beam that way, but I think it was maybe supposed to screw onto the beam. Oh well, it's on and it works for now. If needed I'll end up doing something similar to what everyone else seems to be doing. :) I didn't see him take an adapter holder out of the box in the beginning of the video, but maybe I missed it.
Thanks
Thanks so much. A very helpful video.
The directions that came with the desk are horrendous. It is like they were written by a non-native English writer.
Glad it was helpful!
I had tightened the transmission rod early on (per the written instructions) but now I need to stretch it out when attaching the top. But it’s too tight and won’t loosen. Any suggestions on how to loosen the bolt so it will stretch? The wrench isn’t working:(
This video is the bomb
thanks
I got a question on the crossbeam at around 7:00 . When do you know when to stop adjusting it to have the legs lined up with the prestige’s holes because if you adjust it all the way it comes completely off. Thanks in advance!
thx
This is a good video for the assembly of this desk. When I assembled it, the baffle on the left side in this video is in contact with the nut on the rod. This makes a noise when I raise or lower the desk. This is because there is contact between the two. Did you have this issue as well?
At 5:53 you remove the screws from the supporting beam. When do you put them back on? How much are we supposed to extend the beam? Can someone help me with this as I’m stuck on this step and don’t know how to go on further from here. Thanks a ton in advance to anyone who can answer this.
7:26 how long should I extend the beam? Step 2 doesn’t mention any specific width
I'm sure you've finished your assembly, but I had the same question so I'll answer. This is basically hinted at around 6:04 and more directly answered at 8:54. The initial width isn't so important because you'll adjust it later to fit the table top, for now you just have it and the transmission rod set at the same length. Note that there are stickers on the beam saying you've extended too far on one side or the other so be aware of those so you don't go too far one way or the other.
@kc70 or someone else who has put this desk together, I have a few questions. Is the desk featured here the smaller size or bigger size? Mine is the 60" one. In my directions, it says to drill holes. However, there are precut holes already drilled in, so why do I need to drill holes? When I expanded the crossbeam/frame, now the transmission rod came out. If I try to line it up with the holes, it's not wide enough.
Great Video Sir and Thank You. You Mentioned That the model number is the E1. I couldn't find that model number on Amazon. They only had the EN1. Is it similar or what do you think?
Did you need to clear the saw dust when you drilled into the table
Thanks for the video, how did you connect the adaptor to the table top, is it screwed in or just stuck using adhesive tapes? also how do you select the drill type we need to drill holes where they are missing, please help
I just have the adhesive straps holding it there. Also the drill bit just needs to be smaller than the screw. You want to make sure sure the threads have space to attach to the wood.
I bought two frames and a desk
Excellent video, Thank You, did you try putting wheels on them?
Thanks, no I have not tried to put wheels on it.
I loosened the nut in the transmission rod to extend it but it is not extending. Stuck. Can you advice?
i believe in older models there was no adapter holder. they sent one now but there’s no holes to attach it
Thanks very much! the instructions were unclear and riddled with typos such as "Transmission Rob"
You're welcome, glad I could help.
thank you for the video. i think i set this up correctly. but what does the warning mean? " make sure rotating rod rotate less than 1/3 circle" im worried i didn't tighten up the rod enough.
Sorry for the late response but as long as the desk is moving up and down you should be good to go. Hope everything worked out for you.
kc70 thank you! It is!
Also what level of torque did you have to drill
One of my legs will not raise and I’m not sure why !!! I’ve loosened and tighten the transmission and now I’m ready to send this back
Thanks for this video. Do I really have to drill a hole?
Yes, its advisable to drill before putting the screw in otherwise you could damage the table.
The perspective in this video threw me for a loop. I couldn't tell what side was left and what side was right with the beam attached. Wish there was some wide angle shots
Do you know if I can use my own table top? The frame is great but I need a wider top. I seen a table top from ikea that I like, but need to be able to attach this frame to it without damaging the top.
Yeah of course. It'll work fine.
Really dumb question but what torque did you use when screwing the keypad?
How do u adjust the transmission rod?
My transmission rod does not fit more more that about 0.6cm! I’m so frustrated. Have tried giving as much elbow grease as I can and nada. Any pointers?