Is the 2 circles on top of cab toward the back for bringing air in for the heater and air conditioning? I looked like the barely was going right into them when pushing it into shed. Thank you Tom from Nebraska USA
Great video Gerry, I know from my days working in construction driving a teleportor that JCB I found best machine to drive, the hydraulics on JCB were faster than any other make.
I’ve not had a go with anything newer than about 10yrs old but I can see the new ones will be miles ahead of my old Sanderson. Definitely like the hydrostatic to geared gearbox idea and the cab being higher than the boom.
How did it compare to the Kramer? Where do you think the kramer losses out? . We'd a kramer Kl30.5(I think) for a day. The cab was in the centre. Very nice. It was a bit slow on the hills, but it was 75hp.
Any chance of you getting a Merlo MultiFarmer in to test out? Would like to replace our loader tractor with one as it is hardly used as a 'tractor' but would still like the option of 3pt linkage.
I’ve yet to find a loader that I would say was better than our JD 3215! And that was 17 year old now! JCB paint annoys me, seems to rust and peel very quickly even with the most gentle operator.
I don't agree with the merlo better than jcb .the British built jcb runs rings round merlo .I was a die hard merlo man till I tryed the jcb .I then found the best feature on the merlo it was the ability to drive on the lorry when the loadall was dropped off
@@jasdunlop9907 we've 4 loaders on jcb haven't been the most reliable for us over the years especially the last 2 new ones add blue problems from both of them the hydrostatic in the merlo is miles ahead of the powershift in the jcb, hydraulics very similar the new merlo is slightly faster than the last new jcb we had, for us there won't be any more jcbs bought maybe I could be tempted by the jcb hydrostatic but to be honest I like the merlos no major problems yet from them oldest ones got 12500 hours on on a 59 reg never really put a foot wrong I found the jcbs were due a gearbox rebuild at or before 10000 hours. But each to their own if you like jcb go for it if I'd never had merlos on the farm I'd still be running jcb
Great video Gerry the jcb a tidy machine wrong colour Gerry great drone footage 👍👍👍👍
Hard to beat a JCB Gerry. A wee spray job and she'd fit in perfectly with the fleet. 👍🏼
well yellow is half way there 😂
A Nice tidy, compact machine Gerry.
yes it is indeed. was very tidy I must say
Fine machine. I’d say it would suit you perfectly for the work that you would have for it. How are your eyes. Have they improved
Is the 2 circles on top of cab toward the back for bringing air in for the heater and air conditioning? I looked like the barely was going right into them when pushing it into shed. Thank you Tom from Nebraska USA
Very capable machine Gerry 👍 think most impressive thing is how compact it is 💪💪👍
yea serious compact, very nice
Great video Gerry, I know from my days working in construction driving a teleportor that JCB I found best machine to drive, the hydraulics on JCB were faster than any other make.
I’ve not had a go with anything newer than about 10yrs old but I can see the new ones will be miles ahead of my old Sanderson. Definitely like the hydrostatic to geared gearbox idea and the cab being higher than the boom.
Brilliant video Gerry. A very honest account I’d your opinions on the machine. It seems to be a great yoke. Well done.
Ahh it was. I really liked it. Be tempted in future
Looks like a very versatile machine. But despite that, I find myself drawn to admiring (again) the 2850. Old habit's 😁
Good choice! 😉
Great video Gerry. Sounds like you like the JCB ! Great detail on the review. 👍🏼
Have you tried any manitou’s at all Gerry? Seem to be a popular enough machine around the country.
Good video again. JCB looks nice machine. Getting any new merchandise
Great content as always Gerry. Hopefully that David brown in the yard will be running for summer 2023 🙏😉
995 and 1212 will..... the 990. probably not 😂
Great video Gerry it’s some piece of kit 👌
Great machine, great review
Would you give even flow a spin in the carina 🤔.
Your videos are always good 👍
Thanks Ronald I appreciate that
You’ll be getting a fastrack next Gerry 😂
Impressive machine, the colour is wrong to be on your farm 😆
Merlo or kramer would be the choice 😂
How did it compare to the Kramer? Where do you think the kramer losses out? . We'd a kramer Kl30.5(I think) for a day. The cab was in the centre. Very nice. It was a bit slow on the hills, but it was 75hp.
Any chance of you getting a Merlo MultiFarmer in to test out?
Would like to replace our loader tractor with one as it is hardly used as a 'tractor' but would still like the option of 3pt linkage.
Great video. I know JD don’t make telehandlers.loos like your well on the mend. The 420s sounds interesting
Nice one Gerry
Many thanks
Still doing same Gerry not been on for months been setting up 2,500 acres in North Dakota.
Can I come visit 😁👌
How do you think in compares to the Kramer you tried a few years ago?
Kramer isn’t in same league as jcb
Look well on ur silage pit this summer..
Hard to beat the Deere gerry
I hope the paint work has improved on them
was it peeling/fading quick?
@@kieranosullivan02 peeling and then a hure for rust around the wheels and the boom
What do you think of the Kramer telehandler. Seen yet?
Yea had one one demo. Not in same league as jcb
@@gerry6420 Ow mist that. I also have a jcb butt was thinking to buy a Kramer. Only because of the dealer relation
Advantages of this over a pivot steer? Apart from height
Jcb really seam to have it down to a tee now with that machine
🚜🚜🚜🤗🤗🤗
What do u use the white van for ?
Smuggling 😂😂…. I’m a plumber at times too. It’s the plumbing vehicle
@@gerry6420 i cant imagine u in an attic, you'd cause more damage then good hahahaha 😆 😂 🤣 😅
Good man gerrymandering you will convert yet lol l
Comment for the algorithm to help the channel 👍👍👍.
Are you changing loader
Changing might be the wrong word but buying a another in future be more likely
I’ve yet to find a loader that I would say was better than our JD 3215! And that was 17 year old now! JCB paint annoys me, seems to rust and peel very quickly even with the most gentle operator.
What's in de bags de other lad was putting into the milling machine
Another brown in the yard?🤔
No it’s been here for about 10 years. Long term restoration project that hasn’t started yet 😅
sold.....
Why don’t ya get Phil to do the rolling for ya
He lives too far away for it to be Feasible.
Go get a merlo 42.7 demo will blow that jcb out of the water we've traded all our jcb to merlo now and no regrets
I don't agree with the merlo better than jcb .the British built jcb runs rings round merlo .I was a die hard merlo man till I tryed the jcb .I then found the best feature on the merlo it was the ability to drive on the lorry when the loadall was dropped off
@@jasdunlop9907 we've 4 loaders on jcb haven't been the most reliable for us over the years especially the last 2 new ones add blue problems from both of them the hydrostatic in the merlo is miles ahead of the powershift in the jcb, hydraulics very similar the new merlo is slightly faster than the last new jcb we had, for us there won't be any more jcbs bought maybe I could be tempted by the jcb hydrostatic but to be honest I like the merlos no major problems yet from them oldest ones got 12500 hours on on a 59 reg never really put a foot wrong I found the jcbs were due a gearbox rebuild at or before 10000 hours. But each to their own if you like jcb go for it if I'd never had merlos on the farm I'd still be running jcb
@gerry6420 hi gerry really good vid again, btw are u really a part time plumber to as I live local to you and need some work done if thats possible?