Power Steering Installation went Wrong 💥on my 66 Mustang 🐎⛽🚗
HTML-код
- Опубликовано: 22 авг 2024
- 📷 Follow Us On Instagram / dannypazos1
@DannysClassicGarage
⛽What's up guys !! sometimes we don't expect something wrong, but it happens😒, today I found a problem with my car and i couldn't' install my Power Steering Conversion properly.... is not the end of the world but does not feel good, we will need some parts from a donor car and we will cover that in another video📽️
Parts Used in this Video
1- 🚗 Borgeson Power Steering Conversion Kits 999023 (without Pump) - www.summitraci...
2- 🚗Borgeson Power Steering Conversion Kits 999020 (with Saginaw Pump) - www.summitraci...
3- 🚗 Borgeson Power Steering Hose Adapters 925123 - www.summitraci...
⛽Thanks for watching, don't forget to like and subscribe to support the channel 👍
Loving the series.
😃😃😃👍🏻
My kit’s hoses were too short and hard tube was angled wrong. Had to get a longer hose made then worked well with the Saginaw.
Yes, I had the exact same problem, I didn't order longer hoses, I just add a new hose section to the return hose and clamp it, I'll see how it works when the car runs but i think it will be ok
Good video, one safety thing i noticed on other videos is that they grind off the splines in the area for the rag joint set screws so it can't slip off.
Hey chris! Thanks you so much for the advice, you are right, I'll do it 👍🏻