Hello. Brother. I have HONDA ACCORD CL7 2004 its dash smart light glowing and i scan for DTC the DTC in body control module is B1640... RF1 ANTENNA NOT CONNECTED OR MALFUNCTION.
Mr. Mohammed how’re you? My name is Sam I have this 2021 Honda Accord Sport. The car came in with two broken pins in ECM but runnning. I replaced the ECM, BCM and Key but now I just can’t program the system to run. Any help? Thanks in advance
1- try to open the ecu and by pass the 2 pin solder a wire and drag it out 2- get a brand new ecu and program it if you but used ecu same part number some time you will get software mismatch on tcm abs and so on
Hello, I had one working key for honda accord 2020 and when I tried to add another key it didn’t work then both keys stopped work and didn’t allow me to program , any advise?
@@simeonhadev4062only if you click wrong answer. You gotta hit no because the key your programming is old security. So when you answer this wrong and hit yes it will brick bcm. Not all 2020+ modules use the new security with new key design
Hello. Brother. I have HONDA ACCORD CL7 2004 its dash smart light glowing and i scan for DTC the DTC in body control module is B1640... RF1 ANTENNA NOT CONNECTED OR MALFUNCTION.
Скажите пожалуйста при добавлении ключа все ключи из памяти удаляет?или просто добавляет второй, спасибо
Mr. Mohammed how’re you? My name is Sam
I have this 2021 Honda Accord Sport. The car came in with two broken pins in ECM but runnning. I replaced the ECM, BCM and Key but now I just can’t program the system to run. Any help?
Thanks in advance
1- try to open the ecu and by pass the 2 pin solder a wire and drag it out
2- get a brand new ecu and program it
if you but used ecu same part number some time you will get software mismatch on tcm abs and so on
Could you use that same smart fob to program to another car, would it erase from the previous vehicle??
Sir nice job
Please your contact number please
you welcomed
Hello, I had one working key for honda accord 2020 and when I tried to add another key it didn’t work then both keys stopped work and didn’t allow me to program , any advise?
take your time aand start with the old key first when add a key is very simple step ,if you have the car now call me i will walk you through
3472281875
I have the same issue I figured out the autel break the bcm for those cars from 2018 and up I stopped use autel on those cars
@@simeonhadev4062only if you click wrong answer. You gotta hit no because the key your programming is old security. So when you answer this wrong and hit yes it will brick bcm. Not all 2020+ modules use the new security with new key design
Masha Allah
Where are you located? I want to add keyless entry to my car
Brooklyn ny
@@BestCarFixes does this add keyless entry to the car?
Does anyone know if you have to program a new BCM or prgram the key to the new BCM?
what if I don't have this device to program it?
Where are you located
Brooklyn Ny
After remotes start put a gear in R mode and D mode the engine is shut off used push button start no anything problem car is good
So the only way to program my extra key is to pay someone else to program it.
I think so
you can buy this kits with keys and do it your self
amzn.to/3NV3mQW