Gluing Veneers to Back of Headstock Beau Hannam Guitars and Ukuleles
HTML-код
- Опубликовано: 4 окт 2024
- If you enjoy such lutherie videos, please SUBSCRIBE.
He is my method for gluing burl veneers to the backs of my headstock.
This works with and is a good method for any wood, not just burl.
Luthier of luxury heirloom quality guitars and ukuleles.
www.beauhannam... - Хобби
Thanks for sharing Beau. I’ve never glued a backstrap. Your explanation is clear and concise and I feel that I’ve got the information needed to do it. Much appreciated.
Thanks for saying that Rick. I always appreciate it :)
As a boatbuilder I am mixing epoxy all the time. I use mixing wands made out of coat hanger chucked in a drill. Just a couple bends in just about any direction is fine. Saves me hours of mixing time and gives me great piece of mind on even small batches like you're using.
Sweet tip
Thanks for this video, I am making my third guitar and I’m going to put a verneer of Rosewood on the back side of my peghead. I am using Ebony on the face of the peghead. I will use your method, you’ve demonstrated perfectly... thanks Beau...✈️✈️🎸🎸
it shall look very nice :)
I am just about to do this same thing and I hadn't thought of using epoxy rather than wood glue. Thanks for the idea!
My pleasure Jim. With burl, (even with not burl) the technique of using epoxy and also pore filling with it at the same time is proving to be a good idea. Just use a lot of wax paper!
Excellent work as usual! Great idea to use epoxy to glue and fill at the same time too !
Thank you! Cheers!
This is awesome. Thanks for the informational video! I only wish I had seen it before I did this step. I had already determined that I would use epoxy next time since the wood glue seeped through the veneer and is not clear like epoxy. Also I didn’t know I could/should have done more than 1 layer. Mine is super thin. Thanks for the videos man!
My pleasure Chris :)
I'll throw another epoxy tip at you. Old disposable Japanese saw blades make superior scrapers for epoxy. They are fairly hard and so will only take a very fine burr. I've compared them up against the exact same scrapers you are using there and the saw blades win out on epoxy every time.
Good tips- thanks
Thank You Beau
You are so welcome
Nice work. Just discovered and subscribed.
Thanks Tommy
What would we do without Harbor Freight clamps?????
Spend 3 times as much $$$ and have 2 times less clamps!
Hi Beau, I have a question that you can no doubt answer. The guitar I’m currently building will have a Mahogany neck. I have some West African Ebony for the face of the peghead. I have decided to put a piece of Brazilian Rosewood on the back of the peghead. I have both of those verneers finished to .050. I need overall peghead thickness of .625 for the tuning machines to work. Actually two questions: are the verneers too thin; and will the peghead be too thin at .525 before gluing the verneers? I actually got the idea of the verneer on the backside of the peghead because I want to inlay something on the Rosewood and the Rosewood will match the back of the guitar... thanks Beau, I can only hope mine comes out somewhere near to yours...
My back veneers are usually typical veneer thickness of 0.020" as that is how i buy them.
Just calculate the final thinness with all the layers and make that number come out to the thickness you want.
Thank you Beau...
Does this provide the same structural advantages as a solid wood (one piece) backstrap? Thanks
Multiple layers are actually stronger then solid wood (all things being equal like thickness, and species etc) , especially if they are glued cross grained like plywood.
How much does a vanier effect tone. I'm thinking about glueing down a 1/4" before sanding piece of ebony on a yamaha dreadnought gigmaker that had a broken peg head that I fixed but sinse the fretboard is black and the bridge is I'm thinking go for it.
Peg head veneer has no effect on tone. Peghead mass may effect tone though.
What was the white material?
The veneer? Bleached maple- from LMI