Recently got this press. Tested only 11oz mugs so far. The element does not throw out as much heat as other presses, so you have to often ramp the heat up to max and add more time to get good results on mugs. Hope to see you doing some tumbler tests. Will be doing tumbler tests myself soon as well. Hoping to get good results.
Год назад
Hi. Seems that i have the same problem. If i use only one mug in the middle, it seems not too much heat and preasure. Wasted 3 mugs... picture was fady and not good quality. What time and temperature did you use?
@ Its not the best press for mugs but it can work if you dont have anything else. I max the temp out at 410 degrees and do about 270-280 secs time. Also Ive found that putting the mug to the left of the element instead of the middle helped with the heat and will reduce chances of fading & light prints.
Год назад+1
Thank you, i will try that... bought this press to save time and do 2 mugs at the time, but was really frustrated...waste of money. But i will try your settings 👍
@ Your welcomed. Hope it goes well. Yeah I dont think 2 mugs at the same time may go well unless maybe you try giving a lot more time. Have you done any tumblers on yours? I think this press maybe better for doing just tumblers.
Год назад+1
No, i did not used it for tumblers. They are not so popular here. I think i need to try some travel mug in it maybe. Maybe for them it's ok. Its a pity that they not do good ceramic mug :( Watched some other videos about this press, where crafter was happy about result, but for me it doesnt looking fine. Maybe the issue is my quality standarts :😀 But i would be ashamed to give poor quality product for my customers
Excellent, you will have so much fun with it. Cricut have so many lovely designs that you can use as well as some really nice papers. I would love a sublimation printer to have even more scope but I’m very happy with the results I’m getting with Cricut and the Vevor mug press
@@kinuski1557 I know its an old post, but I got a cricut mug press and it didnt even last me 1 yr went into a E4 error and cannot be cleared thus far... so sad - I was having soo much fun
Probably. I haven't used AI to create designs for my projects. I am pretty sure there will be plenty of tutorials on RUclips that will help you to create designs.
We tried the link a few times ourselves and found that sometimes it would give us a 404 error message and other times it would work which is a bit bizarre. So not sure what is going. But just click it a few times and hopefully it will work for you. We will check this out with our affiliate program. Thank you so much for letting us know. UPDATE: I've also changed the link to see if that works.
Tried it again and it's still not working. I am wondering if it's region restricted...I am in Singapore and I have noticed that it happens sometimes with other links.
It could be a region issue. I appreciate you wanting to use our affiliate link. If you haven't already bought it, you could go to our website and scroll down a little and there is an 'Where Can You Buy it" section with the link there as well. This is the link to that: www.alandacraft.com/2023/09/30/vevor-mug-heat-press-review/
I know it may seem a bit frustrating, Cyn. We just happen to have been sent a number of items to review and we had to meet those obligations. We still have a couple more to go. However, we do have some quilting and sewing videos to put up shortly. Thank you for your support.
Thanks Alanda!
Recently got this press. Tested only 11oz mugs so far. The element does not throw out as much heat as other presses, so you have to often ramp the heat up to max and add more time to get good results on mugs. Hope to see you doing some tumbler tests. Will be doing tumbler tests myself soon as well. Hoping to get good results.
Hi. Seems that i have the same problem. If i use only one mug in the middle, it seems not too much heat and preasure. Wasted 3 mugs... picture was fady and not good quality. What time and temperature did you use?
@ Its not the best press for mugs but it can work if you dont have anything else. I max the temp out at 410 degrees and do about 270-280 secs time. Also Ive found that putting the mug to the left of the element instead of the middle helped with the heat and will reduce chances of fading & light prints.
Thank you, i will try that... bought this press to save time and do 2 mugs at the time, but was really frustrated...waste of money. But i will try your settings 👍
@ Your welcomed. Hope it goes well. Yeah I dont think 2 mugs at the same time may go well unless maybe you try giving a lot more time. Have you done any tumblers on yours? I think this press maybe better for doing just tumblers.
No, i did not used it for tumblers. They are not so popular here. I think i need to try some travel mug in it maybe. Maybe for them it's ok. Its a pity that they not do good ceramic mug :(
Watched some other videos about this press, where crafter was happy about result, but for me it doesnt looking fine. Maybe the issue is my quality standarts :😀 But i would be ashamed to give poor quality product for my customers
Just ordered myself a vevor mug press. Also have a Cricut machine. Thank you for the tutorial. Can’t wait to start offering more options for my mugs!!
Excellent, you will have so much fun with it. Cricut have so many lovely designs that you can use as well as some really nice papers. I would love a sublimation printer to have even more scope but I’m very happy with the results I’m getting with Cricut and the Vevor mug press
Which one is better?
@@kinuski1557 I personally like vevor
@@kinuski1557 I know its an old post, but I got a cricut mug press and it didnt even last me 1 yr went into a E4 error and cannot be cleared thus far... so sad - I was having soo much fun
Thank you for this ❤❤❤❤❤❤
Omg love it ❤❤❤❤❤❤
So did you find the 185c 260s was not enough?
You’d recommend 205c 260s?
I don't understand how to set the pressure, how hard should it be?
Can I use gpt to create my designs? Any tutorials on how should go about it. Thanks
Probably. I haven't used AI to create designs for my projects. I am pretty sure there will be plenty of tutorials on RUclips that will help you to create designs.
Are you using sublimation mug using influsible sheet or just ceramic mug?
We are using Cricut Sublimation mug blanks.
Yr aff link is not working
We tried the link a few times ourselves and found that sometimes it would give us a 404 error message and other times it would work which is a bit bizarre. So not sure what is going. But just click it a few times and hopefully it will work for you. We will check this out with our affiliate program. Thank you so much for letting us know. UPDATE: I've also changed the link to see if that works.
Tried it again and it's still not working. I am wondering if it's region restricted...I am in Singapore and I have noticed that it happens sometimes with other links.
It could be a region issue. I appreciate you wanting to use our affiliate link. If you haven't already bought it, you could go to our website and scroll down a little and there is an 'Where Can You Buy it" section with the link there as well. This is the link to that: www.alandacraft.com/2023/09/30/vevor-mug-heat-press-review/
Kiwi 🥝
a mix - 🇳🇿 born living in 🇦🇺
Your channel seems more like product promotion these days. 😢. It’s always good to hear about new stuff but not constantly.
I know it may seem a bit frustrating, Cyn. We just happen to have been sent a number of items to review and we had to meet those obligations. We still have a couple more to go. However, we do have some quilting and sewing videos to put up shortly. Thank you for your support.
Cool but not for me
It's out of our general realm of crafting as well Nancy, but I have to say I'm loving it and it is so much fun to do.