Thank you so much, im upgrading my stock halogen bulbs in my 95 jeep Wrangler to led and this video really helps with understanding not only how to do it, but explains why. Very helpful, 5stars!
Outstanding! I am adapting a kit to a moto. Needed more information, to make changes, and understand what will work-and what will not. You are a great teacher! Thank you.
Same here. I installed the bulb all the way up front to the “shell” and well I’m not getting any reflection will need to move bulb back further into shell
I was stuck on trying to install an LED H4 headlight into my motorcycle and couldn't figure it out. Thanks to watching this video I got it done and know how low and high beams works. Thanks.
wow just install my led to the car i knew something was off i even adjusted the light myself, but still no good thnks for the informative video now i know what went wrong many thanks
Fantastic Video! I have been struggling with the right position, and your video it is really clear and very detailed, thanks for this great video! Thumbs up man!
Need to add that is a great video and we should also check on a wall the Halogen light line and LED line and place LED just below to avoid blinding other drivers, y9ou can try that by on your headlights go 30 meters from your car and position your eyes at the same hight of another driver .. if you see stars and your eyes are disturbed then lower your beam by regulating screws in the assembly. Be Safe!
Very Very Well explained video. I am having trouble with my headlights after modifying and installing headlights. The low and high beams are all over the place. Will fit the bulbs correctly. THANK YOU VERY MUCH.
Hello cat, I'm Jason! I'm watching your master's video to learn how to install LED towards my car! He is very informative and like 0:40 I would just blindly install Thanks for the video! Also, your voice sound just like my uncle but better in English.
Wow very informative video sir. I am just searching how to install led with fan , and you gave a simple and detailed explanation how low and high beam works inside a headlight😊
Bruh i had a pair of led headlights similar to these which had big rear fans 2 years ago. had a hard time making it fit, did some cutting with the rubber boot cover just to make it fit then had a problem because water could go inside during rainy weather. So i immediately put the oem lights back and replaced the rubber covers. Only to find out now that we could simply take out that piece of ring adaptor and make it fit without alterations. Good thing i still have it on my old cabinet. I'mma install it again tomorrow as soon as i wake up. Eureka.
Thanks. very informative. now i know i bought the wrong LED headlight design for my h4 headlight socket. i purchased a new one similar in this tutorial.
You just saved my ass bro, I thought I had installed in the wrong way the cables, but I just put the LED upside down. Now I now that it is with the spoon looking to the up side.
I have the C6 LED, they have the same design as yours. The problem is if install them with the light guard/scoop facing up, the hi beam is extremely poor. When i face down the scoop hi beam is better. What could be the problem? They have 35/40 wattage
Heres a video of my homemade air compressor made from a junk air brake pump ruclips.net/video/tNmAcYsSxIw/видео.html
This video was SUPER helpful when you want to switch H4 from Halogen to LED, Manufacturers don't explain this.
Very clear , concise and simple presentation.No annoying useless imagery or cartoons, no irritating music .No " shoutouts" or hardselling.
Wow the only person that explain exactly how the beam pattern should be thank you very much
One of the most intelligent videos explaining LED bulb install. Great job and much appreciated!
Lots of videos about this that simply don’t tell you what you need, this is not one of them! Very helpful! Thanks very much!
Thank you so much, im upgrading my stock halogen bulbs in my 95 jeep Wrangler to led and this video really helps with understanding not only how to do it, but explains why. Very helpful, 5stars!
Excellent. I wasn't sure that I remembered the procedure correctly, but your video put me back on the right track! Thanks, Sir.
Outstanding! I am adapting a kit to a moto. Needed more information, to make changes, and understand what will work-and what will not.
You are a great teacher! Thank you.
Same here.
I installed the bulb all the way up front to the “shell” and well I’m not getting any reflection will need to move bulb back further into shell
I was stuck on trying to install an LED H4 headlight into my motorcycle and couldn't figure it out. Thanks to watching this video I got it done and know how low and high beams works. Thanks.
Thank you. Had no idea about that spoon on the low beam filament. Mine were the other way round. Can't wait to see how they light tonight
I know this circular metal cap is removable but that didn't cross my mind to install it first. Thank you so much for sharing.
Installed an LED bulb which had been thrown away since I thought it's trash without knowing how H/L work. Thank you sir!
This video is so much helpful, clear, concise and straight to the point. Thank you.
Love your explanation. I was confused but after watching your video, I am confident about my installation. Thanks.
Thanks i didnt know which way up as led manufacturer did not put any instructions, your video is very helpful to install led.👍
Very informative and I finally understood how the LED light works and how to properly install on it my motorcycle. Thank you very much sir.
Finally someone who explain correctly.
Thanks!
Best explanation i found on you tube regarding LED lights 👍 ❤
wow just install my led to the car i knew something was off i even adjusted the light myself, but still no good thnks for the informative video now i know what went wrong many thanks
Great video. I though the extra information was gonna be boring. But I really liked the illustrations. Very informative.
Excellent instructions! Many thanks. Made installing my lights a breeze. Cheers all the way from Australia 👍
Thanks man, i thought my LED wash crap. But following the placement mentioned in your vid really fixed the proper bounce of light.
Fantastic Video! I have been struggling with the right position, and your video it is really clear and very detailed, thanks for this great video! Thumbs up man!
Need to add that is a great video and we should also check on a wall the Halogen light line and LED line and place LED just below to avoid blinding other drivers, y9ou can try that by on your headlights go 30 meters from your car and position your eyes at the same hight of another driver .. if you see stars and your eyes are disturbed then lower your beam by regulating screws in the assembly. Be Safe!
The best explanation on the entire global internet 👍 Rgds from Hungary
At last someone who can explain the new LED lights.
Thank you.
Thanks I got the same led bulbs and I'm preparing to install it. Lucky I searched how to install it properly.
Very Very Well explained video. I am having trouble with my headlights after modifying and installing headlights. The low and high beams are all over the place. Will fit the bulbs correctly. THANK YOU VERY MUCH.
Damn, I really like how your English sounds! No kidding, it's very refreshing, sounds way better than the classic English.
Thank you 😁 I check so many videos and they show me about measuring tape 🤦♂️ you my friend was alot of help ❤
Hello cat, I'm Jason! I'm watching your master's video to learn how to install LED towards my car!
He is very informative and like 0:40 I would just blindly install
Thanks for the video!
Also, your voice sound just like my uncle but better in English.
Wow very informative video sir. I am just searching how to install led with fan , and you gave a simple and detailed explanation how low and high beam works inside a headlight😊
Thank you brother for taking time to show us this videos.
Bruh i had a pair of led headlights similar to these which had big rear fans 2 years ago. had a hard time making it fit, did some cutting with the rubber boot cover just to make it fit then had a problem because water could go inside during rainy weather. So i immediately put the oem lights back and replaced the rubber covers. Only to find out now that we could simply take out that piece of ring adaptor and make it fit without alterations. Good thing i still have it on my old cabinet. I'mma install it again tomorrow as soon as i wake up. Eureka.
Thank sir,
Finally someone who made it sooo easy to understand. Many thx again
Thank you very much for description of proyection. Regards from Mexico
Thanks. very informative. now i know i bought the wrong LED headlight design for my h4 headlight socket. i purchased a new one similar in this tutorial.
You just saved my ass bro, I thought I had installed in the wrong way the cables, but I just put the LED upside down. Now I now that it is with the spoon looking to the up side.
Thank you, that was very helpful. Basic knowledge well presented. Excellent.
Very helpful. But small dough. Is dust cover can have a chance to burn by headlight heat?
thanks, i have been looking the proper way to install those led
Great video, simple and clear!
Above all,
I like yur accent!
Very nicely explained. Thank you.
Thanks Sir....clear, simple & to the point video...🙏🌷🌷
the most useful video about led light ! thanks sir
Very informative sir. Thank you so much for sharing.
Very well explained, and thank you for your great examples. 🙂 Ted
Good Info Thanks .. I like your Accent .. 🙂
Just the right tutorial I need! Thank you for the video.. 😁👍👍
You explained this very good. The best explanation on the youtube ;D
Thanx , you're back in my will !! 🍺 😎 👍
Very helpful. I was stumped. Thank you
Thanks a lot ....i never knew it worked like that ...i just thought as long as it is secure it fine ....didn't know they had sides they have to face
Thank you for this video. From where have you ordered those bulbs? I'm thinking of getting mine from AliExpress.
Shopee, its more or o less the same flatform with alie, i wouldnt be surprise if the products are all the same. theyre all made in china.
Greate demonstration, excellent 👌.
Thank you so much. Very good explanation
Galing nyo po sir😊😊😊😊
Amazing. Thank you. Understood everything. Because of you my Smart Fortwo has headlights now. Thank you again.
You got my sub, like and share 😉.
EXCELLENT VIDEO. VERY WELL EXPLAINED !!
Excellent Demo...
*_THANK YOU VERY MUCH_* for the informative video Sir...
😎👍🏼
You have earned my subscription.
Thanks indeed for your great information
Very nice explanation.
Brother whats the difference between h4 h6 h9 nd h11.. Kindly explain amd which one will be better for car headlight
Great rewiev, very clear.
thank you very much, very informative
As always, brilliant.
thank you..
Loved the explanation 😊
Adjusted correctly. Thank you!
thank you po kaya pala may hiwa sa gitna yung ilaw ko haha sideways pala pagka lagay ko kaya pala parang pangit ng ilaw ko salamat boss
Neatly explained! You got a subscriber!
Really really helpful bro!
Best video of the day.
Thanks for the video 👍👍
Thank you very much for the info 👍👍👍🍻
Good explanation 👍
Really helpful,, thanks man
Hello ' can you install this to an old Sedan as well?
Tnx 4 d info👍🏍️
is this good led light? c6?
I just want to know if the bulb is placed horizontal or vertical...a thousand videos watch and now says kmt
thank you so much this helps me so muchh
very good job bro
perfect explanation
Thanks
very nice video!!good work
Very helpful. Thanks
Thank you sir, appreciate it
Great video, thank you.
Thank you very much!!!
good video help me out big time, des.
Liked and subscribed already bro.
thanl you...
And thanks to you too 😌
Thank you! Very helpful! 👌
How do I know what LED will fit? I have an
1976 Chevy Itasca p20 chassis
For so long as it has an h3 socket.
Thanks this is very very good thanks alot man
I have the C6 LED, they have the same design as yours. The problem is if install them with the light guard/scoop facing up, the hi beam is extremely poor. When i face down the scoop hi beam is better. What could be the problem? They have 35/40 wattage
Adjust headlamp
@@MrDIYer is the wattage good enough for single beam housing?
Доброго дня . Вашего языка я не знаю, но вы классно объяснили как правельно ставить лампю👍👍👍👍👍👍
Thank you very useful
Nice cat! ♡
good video help me out big time ,des,