President BT MIKE - Steering Wheel Microphone for President CB Radios
HTML-код
- Опубликовано: 8 июл 2024
- Keep your hands free! --- Bluetooth
Steering wheel microphone for PRESIDENT radios.
Compatible with PRESIDENT 6-pin CB and 10M radios.
To BUY a radio like this:
www.bellscb.com/products/micr...
𝗖𝗵𝗮𝗽𝘁𝗲𝗿𝘀
00:00 Opening
00:10 *** 𝙄͟𝙣͟𝙩͟𝙧͟𝙤͟𝙙͟𝙪͟𝙘͟𝙩͟𝙞͟𝙤͟𝙣͟ ***
00:47 Audio Test listening on Galaxy radio
01:18 Showing controller
02:03 Start Demo from Vehicle to Base
02:58 Conclusion
🔴 Screwdriver’s comments
------------------(◣_◢)-----------------
www.bellscb.com
Thank you for watching. Please Subscribe to my channel to see more videos.
Click the 🔔 “BELL” for Email Notification.
Remember to click the "notify bell" to receive
notices when I post new material. You don't
get notified by just subscribing, you have to click
the BELL to get emails when we post a new video.
That's just how RUclips does it.
DON'T MISS ANOTHER VIDEO: Follow these steps
⏵1. Visit my channel page ( / bellscb1 )
⏵2. If you're not subscribed, click the Subscribe button.
⏵3. Click the bell icon. 🔔 (so important)
⏵4. A dialogue box will appear, allowing you to select to
receive 𝗔𝗟𝗟 notifications.
Did you like my video? .... Please click 👍 LIKE and comment.
Did you hate my video? .... Please click the 👎 DISLIKE and 𝙋𝙊𝙎𝙏 𝘼
𝘾𝙊𝙈𝙈𝙀𝙉𝙏 telling me what you did not like.
Your comment means so much to help me do
better.
Please remember, this is for giving a vote on
my VIDEO - NOT the radio. If you don't like the
radio, please don't dislike my video.
● Website: www.bellscb.com
● Subscribe to our RUclips channel: / bellscb1
● Like Us on Facebook: / bellscb
● Contact us: bellscb@bellscb.com
Disclaimer : The information contained on the video is for general information purposes only. Bells CB LLC assumes no responsibility for errors or omissions in the contents of the video. In no event shall Bells CB LLC be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, negligence or other tort, arising out of or in connection with the use of this video or the contents of the video.
Bells CB LLC reserves the right to make additions, deletions, or modifications to the contents of the video at any time without prior notice.
IF for ANY reason you feel this video violates your rights, inform us immediately at "bellscb@bellscb.com" and the video will be removed until the issue is resolved, or deleted permanently if necessary.
© 2022 Bells CB LLC
All Rights Reserved.
𝅘𝅥𝅯 Music by :
Technology Calm Logo 02 by TaigaSoundProd®
Link: www.filmmusic.iosong6670-technology-calm-logo-02
License: www.filmmusic.iostandard-license
📽️ Video Processing and editing:
𝑺𝒄𝒓𝒆𝒘𝒅𝒓𝒊𝒗𝒆𝒓
Bells CB LLC ®
www.BellsCB.com 
Наука
awesome videos keep up the great work.
Thanks, will do!
WOW. That sounds great. I assume the dongle on the radio is powered by the radio.
Yes 100%
Nice 🙂
I seen mower junkie demonstrate one a couple weeks ago abs thought it was fantastic but I was having trouble finding them for sale. Then a week later I seen them on your website.
At some point I may get one for my Lincoln II plus.
Very cool!
The sensitivity is great but can it be adjusted?
Only with the mic gain in your radio, also what I failed to cover is that it has the same great noise reduction as their DIGI-MIKE . 5 levels of NR.
Can you hear the radio through this thing too?
NO you cannot
Does it work with all radios. Or just the President series
Just president radios possibly the anytone 6666 since they have the same wiring that would be a good test for bells CB to see if it works on that one If they read the comment maybe they could figure it out
It is specific to President 6 pin radios only. Simon already covered that on his channel.
Supports President only 😊
@@Optimus2179 thanks.
Would this work on a rci 2995 dx
No sir