Being a late model mustang guy when I see you fitting the headers down through the engine bay from the top I have to get a little envious. On older cobras, gt500s and coyotes that is impossible to do lol. Basically any of the mod motors ECSPECIALLY the 4v lol. So of that am jelly lol.
Passenger side has to go from bottom, steering shaft removal, starter removal, under brace dropped, plugs and wires pulled, oil dip sticl pulled, etc, etc. Its actually a pita.
I’m guessing that was the optimized tune numbers and not just bolt on no tune, still a much better deal than you’ll find anywhere else. Now I just need to get a 6 gen.
You are located in NC is that correct? I live on Long Island so it is a little bit of a drive.Perfect setup and it’s exactly what I’m looking for.2018 Camaro SS
I'm interested in this, i want to keep my stock NPP on my 2022 2ss. I want louder then stock, but not crazy, this seems like a happy medium from what i hear others saying. What about drone noise?
I have a 2020 ss beautiful car I’ve had it stock for two years already. I wanna do something to it already but I live so for from your locations? Can you guys ship the headers?
Hey Alyssa, possibly, we'd be glad to talk options with you! I encourage you to reach out to a Performance Consultant, we'd be glad to chat! nationalspeedinc.com/contact/
Absolutely! I recommend filling out this form, so a Performance Consultant can reach out to you and gather additional information and put a quote together for you. nationalspeedinc.com/contact/
Where can I buy these for my camaro 16-23+ CAMARO SS/ZL1 1-7/8TH" LONG TUBE HEADERS - SPEED ENGINEERING, idk if those are it but the sight is called wild hammer Motorsport I really wanna get these for my camaro they sound hella good
The 2.0L turbocharged 6th Gen Camaros are quite a bit of fun with some modifications! But if you're after more than just "a bit more," then yes, upgrading to an SS model is the better move.
I have both....SS with LT headers and a FBO 4 banger Camaro with a Spec clutch and flywheel set....The 4 banger is bit of a beast especially on back roads and gives my SS fits. 😅
@@Highlander1432 American Ohio made …? Like the other guy said I don’t want Chink headers either. So your total install costs $1500 😮 that’s me supplying the headers
Being a late model mustang guy when I see you fitting the headers down through the engine bay from the top I have to get a little envious. On older cobras, gt500s and coyotes that is impossible to do lol. Basically any of the mod motors ECSPECIALLY the 4v lol. So of that am jelly lol.
Ha! Yeah, that is one very nice thing with this platform.
Passenger side has to go from bottom, steering shaft removal, starter removal, under brace dropped, plugs and wires pulled, oil dip sticl pulled, etc, etc. Its actually a pita.
I’m guessing that was the optimized tune numbers and not just bolt on no tune, still a much better deal than you’ll find anywhere else. Now I just need to get a 6 gen.
Correct! These numbers include our custom calibration.
@@NationalSpeedInc Thats a problem here in the midwest. Trying to find a shop that can do the custom tune for you.
Should not drive with LT's and no tune.
I would love to see a small demonstration video how it drives on the road after install the headers.
Great idea! We want to start getting more in-car footage after the installations.
Does a header effect the driving?
You are located in NC is that correct? I live on Long Island so it is a little bit of a drive.Perfect setup and it’s exactly what I’m looking for.2018 Camaro SS
Can you run them catless since the cats are separate or you can’t?
I'm interested in this, i want to keep my stock NPP on my 2022 2ss. I want louder then stock, but not crazy, this seems like a happy medium from what i hear others saying. What about drone noise?
Louder than stock,not then.
Do you ship to italy?
I have a 2020 ss beautiful car I’ve had it stock for two years already. I wanna do something to it already but I live so for from your locations? Can you guys ship the headers?
Hey Alyssa, possibly, we'd be glad to talk options with you! I encourage you to reach out to a Performance Consultant, we'd be glad to chat! nationalspeedinc.com/contact/
What spark plug wires are those?
Is a tuned required with these headers?!
Yes
Looking to buy these will they cause a check engine light?
A custom calibration is recommended with LTH installs.
I don’t see any E85 packages available on the site? Can y’all do that instead of 93 to offer more gains?
Absolutely! I recommend filling out this form, so a Performance Consultant can reach out to you and gather additional information and put a quote together for you. nationalspeedinc.com/contact/
Can you do this to a 6.2 camaro 2019 too without the ss or rs ?
Yeah
I don’t think anyone will top speed engineering offering headers and mipipe for under 700 dollars. You can’t beat that.
Where can I buy these for my camaro 16-23+ CAMARO SS/ZL1 1-7/8TH" LONG TUBE HEADERS - SPEED ENGINEERING, idk if those are it but the sight is called wild hammer Motorsport I really wanna get these for my camaro they sound hella good
I have a MBRP Axleback will it obnoxiously loud with this setup?
yes
@@harshanbajwathanks
Can you use the stock o2 senspr or do i need to get an extesion for the high flow?
u cant use stock
What are the mods on the Camaro besides LTH?
This car was equipped with our Stage-2 NA Performance Package: nationalspeedinc.com/packages/gm/camaro/2016-2020-6th-generation/2016-2020-camaro-ss/
Will these fit on a 2024 Camaro
Yes
Are they available for 5th Gens?
Absolutely! I encourage you to reach out to one of our Performance Consultants here: nationalspeedinc.com/contact/
Nice. That's a gorgeous Camaro. We could use you guys in the Knoxville, TN area...wink, wink :)
I have a 2017 Chevy Camaro LS /LT or Lt/LS. Supercharged 4 cylinder. Is there anything I can do to get more power and better sound?
Sell it and get a SS Model you will love it.
The 2.0L turbocharged 6th Gen Camaros are quite a bit of fun with some modifications! But if you're after more than just "a bit more," then yes, upgrading to an SS model is the better move.
Fbo E85 an SS and you can play with hellcats
Lol
I have both....SS with LT headers and a FBO 4 banger Camaro with a Spec clutch and flywheel set....The 4 banger is bit of a beast especially on back roads and gives my SS fits. 😅
how much out the door in NC ...? 2022 2SS 1LE Auto
$1500 for install and dyno tune ?
@@Highlander1432 American Ohio made …? Like the other guy said I don’t want Chink headers either. So your total install costs $1500 😮 that’s me supplying the headers
I don't want Chinese made headers on my car.
Stainless Works also offers Made In USA options!
Pay for the American made then…simple.
@@paulcabinatan2390 Exactly....or pay to support the communist Chinese economy instead of Americas economy.... real simple.
Most of the components of your car comes from CHINA😆
@@Viages Not my car. Maybe in your Toyota.
I don’t hear a difference, sounds just like mine and all I have is a muffler delete, and crush pipe delete
Let me come drop off my k20 civic
Drive it off a f'ing cliff
In other words you get what you pay for
Yeah, in this case, we believe you get more than you pay for, which is nice!
Short tube headers .
Stainless Works Headers are a great value!