This is the most entertained I've been by a series on youtube in a long time - take that for what it is. I recently split apart my first engine and learned how little I knew, this is inspiring to an aspiring diy guy. Thank you.
WR250 then camera girls bike let her get more practice with it before making it road legal then if she falls of won’t brake indicator or reg holder or anything like that
Dude, your Wife/Girlfriend is super cool. I love how into it and supportive she is. She loves the whole process probably more than you do. She's a keeper!
First: Maybe a big chunk of the gearhalf vent out through the case when it broke, and just some gears/smaller pieces stayed in the motor. Second: Of course you fix this bike before you starts tearing hear bike.
Have to say something bro... what I enjoy about your videos is that you guys work as a team, your wife is supportive and you guys have fun while working together. Much respect to your wife and you bro. Always looking forward to your next videos! Respect 👍
Here’s how ya go about this. Finish the little WR cause we all like seeing good bikes brought back to life for people to enjoy again. Then sell it and use the proceeds to make her bike street legal. Or teach her how to ride the 250 since it’s a wide ratio bike and a 4 stroke and should pretty much be street legal! Bam 💥 two solutions!
The large chunk of gear must of escaped with the original damage. I'm amazed how well it survived with the bits of gear/aluminium inside. I expected the bore/piston to be badly worn, but it's not :-D.
Keep working on the WR! I discovered your channel a week ago and blasted through every video. I’ve been going through withdrawals. Thanks for the vid. Keep them coming.
I had to pause the video I was watching to come here and let you know the TE250 series is the best thing I've watched on RUclips. Keep it up, I love this channel! Alright, back to the video!!!!
Tough choose you left us with. I'd say whatever is more achievable as of right now. So there is more content. Maybe get the stuff for the road legal but continue with this engine
Seeing the clean cylinder was a pretty cool find on this! Hope inducing for for the rest of the project. Stick with this blue gal. It would be cool to see you change the crank bearing. Also pretty cool to see that the screen between the clutch half and gear half actually seemed to do its job effectivly. . .Looking forward to the electrical wizardry of the KX too. I actually went to go check one out cause of your last video. looks just as fun as as the KE100; much smaller top end which is cool to see how the modern 2stroke 100 looks compared to the older 2stroke 100.
Keep going, it'll be worth it. I rode one of these on an Enduro in the KwaZulu-Natal, Drakensberg mountains last year. One very capable old bike. Love your films guys.
Finish the WR. So far, it appears that for very little effort and just a little bit of time and money on gaskets, it could (hopefully) run quite nicely.
Great video, interesting to watch this diagnosis. Let's continue the WR's motor. When you've made it down to splitting cases and swapping trans you're kinda committed. Also, it becomes even more interesting to see it get checked out, finding what is necessary to fix or replace and then reassembled with as few "DOH" moments as possible...hehe!
Don’t run that replacement main bearing. It’s been sitting so lack of oil. And could be toast from when the crank blew. Use the other bearing but don’t pound it out, that will ruin it. You need to bake the case in an oven then it should fall right out. Best of luck!!
@@rpmjunky2795 I may be mistaken but in the uk you can get bearings pretty cheap for example I did a Ktm 400 crank bearings both of them for 20 quid :)
Good job of the teardown, I think making a street legal bike is the way forward for now, then a rebuild in slow time, after all, dedication behind the camera deserves reward.
you can make a tool to hold flywheels from a old leatherbelt and a piece of wood. then it works like those clamps to release oilfilters. been using leatherbelt trick for like 28 years. works like a charm
Finish one project before starting another I say you finish up the blue Yamaha first You’re a very smart mechanic props to you 2 good job guys love the videos !.
I vote WR250. Shouldn't be too much work. Start ordering parts for the KX100 to make it street legal. Thanks for posting your videos! Your work is appreciated.
U guys are the bomb seriously... so much fun to watch, so much real info and learning, a very fresh approach to a channel... keep up the good humour and laughs... and swt projects! U said it best, things don't go to you to die... long live the things others gave up on.....
even lawn mowers have a decompression lever on the camshaft ive seen a lot of them fail on tecumseh engines ,, its just a cheap spring loaded lever that works on centrifugal force ,, thanks for sharing some awesome videos !!!!!
Best videos to watch. Doesn't matter what you post, though I suggest you continue with the WR given that I'm emotionally invested in this motor now. It deserves life!
Really cool video my friend. I somehow wound up here after watching videos on bikes and thought this was intermission lol but I stuck through it because I enjoyed your expertise and chemistry with your companion :) Kudos
You and your wife are adorable lol. I’m a RUclipsr too and you guys are very family friendly and I hope that content creating takes your two a long way. Bless up and keep going! 👍🏼
you guys are the best lol I love watching your videos, very informative too i've learned a lot about motorcycle repair just from binge watching most of your videos
I have the solution to the Yamaha vs camera girl dilemma!! Two videos a week! Concurrent projects. then some generators, corvettes, Ferrari’s, etc. You two are great. Always love your episodes.
you dont change horses mid stream! love the editing. its surprisingly fresh! like really really good. its your own! and its good! you can take it very far. keep up the great content!!
I learned something. I should record myself taking complex things apart rather then taking notes. It is FAR easier to watch a video then it is to try to figure out what my bad handwriting means, ha. Also, you done good finding camera girl, haha. She is rather intelligent and can learn fast. Rare bread. Need to keep them around.
you guys are amazing but you made us a promise to post once a week, you are slowly going back on that promise, so many of us wait and wait for your videos, i have been a fan from almost day one, i think in the end this is something you want to do or you don't, there might come the day that your fans might stop waiting on the occasional videos, us my thoughts.
Finish the Yamaha before you forget how to put it back
😂😂👍🏻
What he said! :D
well said
Believe he will not forget how to put it back even after a year !
me*
Finish the WR 250 first. Trust me its harder to start a project after you start another
You can't start something and not finish it might as well finish the WR
You must be new around here
You must be new
I’ve been a subscriber for 4 years
@Rick Thompson Shasta??
Let us roll the dice.
This is the most entertained I've been by a series on youtube in a long time - take that for what it is. I recently split apart my first engine and learned how little I knew, this is inspiring to an aspiring diy guy. Thank you.
WR250 then camera girls bike let her get more practice with it before making it road legal then if she falls of won’t brake indicator or reg holder or anything like that
This
Yes, fair point
+
integrated tail lights a must!
Dude, your Wife/Girlfriend is super cool. I love how into it and supportive she is. She loves the whole process probably more than you do. She's a keeper!
By far my favourite RUclips channel!! Keep it up post as much as possible!
I love this channel to
Finish off the WR250 then starts her project. One project at a time. 😁
First: Maybe a big chunk of the gearhalf vent out through the case when it broke, and just some gears/smaller pieces stayed in the motor.
Second: Of course you fix this bike before you starts tearing hear bike.
I was going to write both these things but i found your comment so im writing this instead.
@@excel111lf dito
Yep that’s what I think too
x4 good minds eh
Agree with others below, WR250 then camera girls bike! Thanks for uploading!
I ih. I i i 9 i9i i i 9 o i9o i i o
please keep working on the WR! your channel has taught me so much about motors i love the videos a lot thank you for the entertainment!
This channel has so much potential. Just keep buying broken stuff and fixing them. This channel will blow up.
Keep going on the 250 I think camera girl needs more practice lol
Yeah, and maybe some safety padding. xD
Have to say something bro... what I enjoy about your videos is that you guys work as a team, your wife is supportive and you guys have fun while working together. Much respect to your wife and you bro.
Always looking forward to your next videos! Respect 👍
Here’s how ya go about this. Finish the little WR cause we all like seeing good bikes brought back to life for people to enjoy again. Then sell it and use the proceeds to make her bike street legal. Or teach her how to ride the 250 since it’s a wide ratio bike and a 4 stroke and should pretty much be street legal! Bam 💥 two solutions!
The large chunk of gear must of escaped with the original damage.
I'm amazed how well it survived with the bits of gear/aluminium inside.
I expected the bore/piston to be badly worn, but it's not :-D.
Keep going on the WR, then make it camera girls bike. I bet she likes riding it better than her green machine.
Yup!
Finish that bike! Freaking love this channel. Been subbed since 40k
Keep on going, you've got me intrigued with this project.
I love his sense of humor. Their a great Duo... definitely one of my favorite RUclips channels and I'm not even a mechanic
Do the motor rebuild sorry camera girl
camera girl lol
Keep working on the WR! I discovered your channel a week ago and blasted through every video. I’ve been going through withdrawals. Thanks for the vid. Keep them coming.
“there it is, Cyclus propelus”
I had to pause the video I was watching to come here and let you know the TE250 series is the best thing I've watched on RUclips. Keep it up, I love this channel! Alright, back to the video!!!!
Ive been waiting for this! Work on the wr!!!!!
You must use same pair of crankcases because they have been casted same time and there can be some differences between other crankcases.
Never clicked off a Steve1989MREInfo Video so fast
Ah i see, you are a man of culture as well.
Nice! Let's get these clutch plates out onto a tray.
Ryan MacHart Let's get this transmission out onto a tray
*Nice*
@@Fireballsocal mmkay
Steve is pretty hard to beat brah....
Love how this channel just progresses from one project to the next.
Tough choose you left us with. I'd say whatever is more achievable as of right now. So there is more content. Maybe get the stuff for the road legal but continue with this engine
Finish the WR, but in all honesty, I see you 2 working on motorcycles, I click, I watch, I am happy! So do what you feel like doing.
I love watching your videos, they’re so fun to watch!💕
Just seen this channel and watched nearly all the videos! Keep up the good work, finally some one who can actually fix stuff and makes it fun to watch
WR250 Engine rebuild first would be great. Love the resurrection content.
Seeing the clean cylinder was a pretty cool find on this! Hope inducing for for the rest of the project.
Stick with this blue gal. It would be cool to see you change the crank bearing. Also pretty cool to see that the screen between the clutch half and gear half actually seemed to do its job effectivly.
.
.Looking forward to the electrical wizardry of the KX too. I actually went to go check one out cause of your last video. looks just as fun as as the KE100; much smaller top end which is cool to see how the modern 2stroke 100 looks compared to the older 2stroke 100.
You do what makes you happy man! Whatever it is, we’re going to enjoy it!
Keep going, it'll be worth it. I rode one of these on an Enduro in the KwaZulu-Natal, Drakensberg mountains last year. One very capable old bike.
Love your films guys.
My life: Dirtbikes, and Jennies garage. Love this channel so much
Pretty cool to have a channel that actually knows what they're doing with an engine!
absolutely love your channel man! Keep up the good work and PLZ post more!!
You guys are cool and I really respect your craft and effort, there’s always someone to appreciate your work out there
Finish the WR. So far, it appears that for very little effort and just a little bit of time and money on gaskets, it could (hopefully) run quite nicely.
Those are stock cams and those small flakes were just from clutch wear, a new set of cases piston kit, kicker gear,
itll run fine
Finish the wr250 before you forget where everything goes and im really inteested
Great video, interesting to watch this diagnosis. Let's continue the WR's motor. When you've made it down to splitting cases and swapping trans you're kinda committed. Also, it becomes even more interesting to see it get checked out, finding what is necessary to fix or replace and then reassembled with as few "DOH" moments as possible...hehe!
Don’t run that replacement main bearing. It’s been sitting so lack of oil. And could be toast from when the crank blew. Use the other bearing but don’t pound it out, that will ruin it. You need to bake the case in an oven then it should fall right out. Best of luck!!
Just buy a brand new bearing for like 7 bucks well worth the money so you don't have to take it all apart again
Euan Fredrick $7? Crank bearings? You know much single oem bearings cost? Like $50. Aftermarket crank bearings are like $60 for a set
@@rpmjunky2795 I may be mistaken but in the uk you can get bearings pretty cheap for example I did a Ktm 400 crank bearings both of them for 20 quid :)
Good job of the teardown, I think making a street legal bike is the way forward for now, then a rebuild in slow time, after all, dedication behind the camera deserves reward.
How did you learn to work like that 🤗
Trail and error
I wanna know!
Can you show me? I wanna know about these strangers like me.
Watch enough videos then buy a small project to start on.
@@samurboi8007 See what you did , very clever :)
Amazing! Your videos always keep me hooked. I’d love to see the WR rebuilt. Thanks for taking the time to do this.
You two as always making me smile.. Thanks from Mr Smiley 😄😄😄😄
you can make a tool to hold flywheels from a old leatherbelt and a piece of wood. then it works like those clamps to release oilfilters.
been using leatherbelt trick for like 28 years. works like a charm
Finish it the WR250 first :)
By the way I love the dynamic between you two, it's something special and I absolutely adore it =)
JG, I thorogly enjoy the content the two of ya'll put. nothing like starting a day on 4.5 hrs of sleep with a cup of coffee and a new video.
very nice vid
now, for then next video... i can't decide, do whatever you feel like because it will make the video better
Finish one project before starting another
I say you finish up the blue Yamaha first
You’re a very smart mechanic props to you 2 good job guys love the videos !.
Cycleus propellus! Best Latin I’ve heard all day!!!
I vote WR250. Shouldn't be too much work. Start ordering parts for the KX100 to make it street legal.
Thanks for posting your videos! Your work is appreciated.
Keep on the WR. Best videos on the whole of RUclips!
U guys are the bomb seriously... so much fun to watch, so much real info and learning, a very fresh approach to a channel... keep up the good humour and laughs... and swt projects! U said it best, things don't go to you to die... long live the things others gave up on.....
perhaps some of the shrapnel shot out through the case hole????????could be where it went???????
Relationship goals! She cheers him on. She is encouraging and supportive even when shit keeps going wrong. Lol two happiest people I ever saw haha
"Tappy tap". Someone's been watching some AvE
Or Happy Gilmore... Which is where AvE got it from
even lawn mowers have a decompression lever on the camshaft ive seen a lot of them fail on tecumseh engines ,, its just a cheap spring loaded lever that works on centrifugal force ,, thanks for sharing some awesome videos !!!!!
I love this channel
Yeaah i do agree dude... finish something you have started!... makes life easier 😃👌 cant wait to see her finished!
I bet the rest of the gear exited the case upon making that hole...
Especially since it was a weld there. The hole was a lot bigger apparently
Best videos to watch. Doesn't matter what you post, though I suggest you continue with the WR given that I'm emotionally invested in this motor now. It deserves life!
Onward with the 250!! If you fix her bike to be street legal now you won't have a camera girl 🤔🤷🏾♂️
Really cool video my friend. I somehow wound up here after watching videos on bikes and thought this was intermission lol but I stuck through it because I enjoyed your expertise and chemistry with your companion :) Kudos
I was told once you should finish one project before you start another. Did I listen. Hell no. But I try.
I’d say WR because I love seeing broken machines get brought back to life.
Awesome dude your amazing
What a great channel. Fun, interesting and amusing! Really a sweet spot between all the other channels alike. Keep it up! 👍
9:09 Confirmed - CameraGirl is Bike-Curious :)
Yu0fgg>==I
THIS GUY
Yep. 250 for me. Let's see that motor back together and running as smooth as a cashmere cod piece.
I vote for the WR, it didn’t seem to take you long to tear it down .
Finish the WR.... That's a bonus deal!! Also keep camera girl riding to sharpen her skills before you put her on the street.Great video!!
“Thanks for watching “ no thank you for being you, your awesome
Refreshing video. Awesome stuff! Glad to have you back guys!
You should repair the bike because it has an FMF exhaust!!!! :)
Turbo Power mine does too :)
Keep up the great content! You inspire my channel more & more! Finish the WR & the camera girls bike next! Thanks for the consistency lately!
Camera girl deserves a street legal bike... WR can wait.
Glad to see it is working out so far.
YES! MORE JENNIES GARAGE!!!!!
I really miss your Shasta Trailer rebuild series. Everytime a video pops up from you I hope it is the Shasta project.
Listening to camera girl saying "Rubber mallet" is such a turn on. 😄👍
1:54 we know you got that impact😉
I love your continuing the flow of the channel.
I liked every single comment here even my own your welcome
You and your wife are adorable lol. I’m a RUclipsr too and you guys are very family friendly and I hope that content creating takes your two a long way. Bless up and keep going! 👍🏼
you guys are the best lol I love watching your videos, very informative too i've learned a lot about motorcycle repair just from binge watching most of your videos
I have the solution to the Yamaha vs camera girl dilemma!! Two videos a week! Concurrent projects. then some generators, corvettes, Ferrari’s, etc. You two are great. Always love your episodes.
crossers are 1 thing loved all over the world. its a universal thing, i like that!
Love love love your uploads! Please carry on with the WR.
I see the trail 90 in the back looking all majestic
you dont change horses mid stream! love the editing. its surprisingly fresh! like really really good. its your own! and its good! you can take it very far. keep up the great content!!
Do both. I really enjoy watching your videos because it funny and entertaining. I look forward to your next video every time
I love your videos it makes me want to work on some projects of my own! I learn something new in every video
I love these videos. I have just brought my first Yamaha 125 WR and I am learning so much fro you.
Cool 😎
I learned something. I should record myself taking complex things apart rather then taking notes. It is FAR easier to watch a video then it is to try to figure out what my bad handwriting means, ha.
Also, you done good finding camera girl, haha. She is rather intelligent and can learn fast. Rare bread. Need to keep them around.
Continue the break down and repair your videos/intelligence keep us on the edge of our seats!
you guys are amazing but you made us a promise to post once a week, you are slowly going back on that promise, so many of us wait and wait for your videos, i have been a fan from almost day one, i think in the end this is something you want to do or you don't, there might come the day that your fans might stop waiting on the occasional videos, us my thoughts.