thanks for this idea to make the board flexier , i just failed at putting eva on the tabs but great video tho , i changed the tape with the combo u used and it is really fantastic great job!!
6:00 AM Sunday Morning, Nag timpla ako ng kape pero ako yung sumarap, umupo at pinanuod ang napakahusay na video na ito. Salamat po. Parang score sa Videoke = 100.
tried the same poron gasket mod instead of using the rubber jackets and i find that there's still not as much bounce. but i think it's because of the silicone dampener mine came with between pcb and plate. it's much thicker than the foam you used.
Sir baka may review ka ng 5075s na naka alu plate 😁 ang tagal kona naghahanap kasi e. Baka lang meron ka nun hehehe. Btw nice review po. Napa subscribe ako dito sobranh galing 💯
Great vid, just started on the same kit as well and I appreciate having a good direction on how to further mod the keyboard. If I may ask a question, does the Blue Ash Variant looks more Aquamarine in person than in the vid? I got mine and honestly I'm kinda scared that I may have been ripped off as the kit doesnt look like its pale blue
Nice vid! Can you tell me why you changed the gasket's material from silicone to poron? does poron provide more flexibility? or do you just like the sound of it more?
@@pusakalmkb i have a question!! will doing the pe foam mod achieve the same result as the poron switch pad mod that you did in the video? i have pe foam right here with me but unsure if the switch pads are the same type of mod as the pe foam mod. tia!!
It’s actually not the flex that’s making the change in sound. It’s actually the gaskets. Flex and sound are just results of the softer gaskets. You also might want to avoid on too much flex because it would sound like a loose guitar string.
@@pusakalmkb true, i hope there will be mods that will greatly increase the flex rather than leaving the top frame half close for the increased flex lol xd
![How to lube + Sound Test w/ Akko cream Blue & Yellow [RKH81]](http://i.ytimg.com/vi/v5_rAdggSq4/mqdefault.jpg)
gonna follow this guide when I get this keyboard! thanks for the thorough unboxing and mods :D
You are very welcome! You can ask anytime!
thanks for this idea to make the board flexier , i just failed at putting eva on the tabs but great video tho , i changed the tape with the combo u used and it is really fantastic great job!!
I was surprised with the tape combo too!!! Appreciate you for watching man!
6:00 AM Sunday Morning, Nag timpla ako ng kape pero ako yung sumarap, umupo at pinanuod ang napakahusay na video na ito. Salamat po. Parang score sa Videoke = 100.
The best keyboard is the one on your desk”
follow up, “it is also the one on your cart or mind!”
great video dood!!
buy them all!
Thank you man, this Video helped me so much to decide wich Keyboard I am going to use!
Very much welcome
thank you for doing this review. Love it!
Thank you 🥺
I was waiting on a video like this. With this particular color
Hope you liked it mahboi
Can you change the LED strip to a single color and static?
tried the same poron gasket mod instead of using the rubber jackets and i find that there's still not as much bounce. but i think it's because of the silicone dampener mine came with between pcb and plate. it's much thicker than the foam you used.
Hey, do you know anything about FL Esports 680? I can't decide which is better to buy Akko 5075S or FL 680 Esports
your video are truly amaze! gonna follow your build lol. may i know why do you trim off at the 11:00min?
does it come with free switch and keycaps or you have to buy your own?
Love the quote, bro!
Word for thought.
What was that material you put inside the base of the board? 10:26. Shopee link please!
what do you call with the prying tool u used? it seems so easy to use it on this board (compared to other reviews i watched)
Metal crowbar it’s included with my electric screwdriver
Sir baka may review ka ng 5075s na naka alu plate 😁 ang tagal kona naghahanap kasi e. Baka lang meron ka nun hehehe. Btw nice review po. Napa subscribe ako dito sobranh galing 💯
hi, how is the typing experience? does it flex a lot?
Hi sir pusakal, if you had to pick between feker ik75 or akko 5075 ano po pipiliin nyo?
That’s hard. Haha pero I’d go for the 5075 for the extra colors and the side lights.
Great vid, just started on the same kit as well and I appreciate having a good direction on how to further mod the keyboard. If I may ask a question, does the Blue Ash Variant looks more Aquamarine in person than in the vid? I got mine and honestly I'm kinda scared that I may have been ripped off as the kit doesnt look like its pale blue
not sure about aquamarine (that has a greenish hue to it right). got blue ash too and it looks kinda spot on to the video.
Nice vid! Can you tell me why you changed the gasket's material from silicone to poron? does poron provide more flexibility? or do you just like the sound of it more?
Just to introduce more bounce.
@@pusakalmkb ty, I need to try that out on my board XD
love this!! i will be doing the same mods too :>>>
Good luck on the build!
@@pusakalmkb i have a question!! will doing the pe foam mod achieve the same result as the poron switch pad mod that you did in the video? i have pe foam right here with me but unsure if the switch pads are the same type of mod as the pe foam mod. tia!!
@@axiion pe foam would give you a poppier sound. 😊
What's the benefit of keyboard flex in terms of sound?
It’s actually not the flex that’s making the change in sound. It’s actually the gaskets. Flex and sound are just results of the softer gaskets. You also might want to avoid on too much flex because it would sound like a loose guitar string.
Sir paano mo naoff yung LED sa mid bandang keycaps? or di lang pansin sa angle. Plano ko din orderin yan e hahaha. Tia
Pwede sa app or fn+arrow down to dim the lights
Thanks bro 😊
does cutting the standoffs of the PC plate will increase the flex?
It would but unnecessary since it wasn’t the issue for this keeb.
@@pusakalmkb i somewhat think its the frame that limits the PC plate from increasing its flex
@@hisalee161 I think the space between the PCB and bottom case is not that much also
@@pusakalmkb true, i hope there will be mods that will greatly increase the flex rather than leaving the top frame half close for the increased flex lol xd
are MDA profile keycaps good for gaming or nah?
I think it should depend on your preference bro. Some game on SA profile keycaps 😅
@@pusakalmkb ok sir, planning on getting an MDA profile, probably the carolina blue from akko
@@glennpatrickdomingo584 you’ll be surprised with how many they included in the package! Totally worth it!
The quote is making me insane, I literally have a lot of switches on my Shopee cart and I can't decide. What if I just buy em' all? 🤔🤔🤔
Hahahahahaha
10:21 what kind of foam is that.
It’s EVA foam. You may turn on the CC for kore info 🙂
What is better? This or the Feker IK75 pro?
This!
@@pusakalmkb if you have to choose between barebones akko 5075s, lychee g66 pro and acr pro 75 what are you gonna choose?
@@kikiam6119 mod007PC 🫢
@@pusakalmkb it’s sadly out of my budget :((
I only have 5k rn
these vids are truly next level. btw, what lube did you use for the cream blues?
Thanks man! I used the plain old 205g0 on a syringe.
KUYA PLEASE BUY THE MMONSGEEK M1 WANNA SEE U MOD IT DFHGJSDFHGSDFA aluminum na siya for 4.9 sa Lazada!!
M1 review is up
@@pusakalmkb yayyy
Meow :3
p̴r̴o̴m̴o̴s̴m̴ ☝️
Pagawa po ng separate video on how to easily separate the top and bottom part ng keyboard. 🫶🏼