Dewalt is still the King? Let’s find out / Rear Handle Saw Challenge/ Dewalt vs Flex
HTML-код
- Опубликовано: 7 сен 2024
- Music Credit: courtesy of www.epidemicso...
Artist: Mindme
Song: Comes back around (instrumental version)
In this video we test the Dewalt flexvolt 60volt max rear handle saw against the Flex 24 volt Rear handle saw. The Dewalt has the 9 amp hour flexvolt battery and the Flex has the 10 amp hour stacked lithium battery. We cut full depth into a pressure treated 6x6 post as well as a very dense hardwood 4x4 post for ground contact and severe weather. I’m using a blending style of editing so you can see a semi transparent view of both saws at the same time. Please comment and give me some feedback if you like this style. Appreciate all the support as always
Man you broke the number one rule in doing RUclips tool reviews, not using the same brand new blades. Especially one being a framing blade and the other finer finish?
I’m still learning
Who cares, and there are no rules to those that understand rules are for people that need to be led!
Wow the Flex finished first then fell behind, guess the battery must have just gotten too hot!! Great test 💪💪 Flex and DeWalt are the future!
That’s what I was thinking. I wanted to do a high demand draw on those pouch cells and see how they perform. Out of the gate it’s mind blowing power. When the temps rise that’s where we see who has the biggest balls😆. Thanks for checking out the video brother
@@IMPACT-NATION what blade is in the DeWalt? It looks like a 24 tooth framing blade, that's unfair bro.
It’s about time. Thanks for this video.
Absolutely brother. ✊💯
I have the Dewalt and love it never let me down even ripping some firewood on Christmas eve. It's a beast 💪
Brother absolutely. That dewalt is been out for years and is still one of the top dogs as far as power. A true Beast like you said
Haven't seen anything from you on RUclips in a hot minute I just looked and RUclips un subbed me for the second time. I had to actually look you up!! Hope all is well have a merry Christmas brother and a happy new year!!!
RUclips definitely weird man. Yeah buddy we’re still grindin B. Just trying to hustle up before the freezing weather gets here. Once the ground freezes we are locked down from work. Just that time of year man. I hope all is well with you and the family, nothing but love for you B and I mean that. Always have been grateful for your support. Merry Christmas my friend 💯🩸🫡
Wow, what a show! The sawdust was the best part 😏
Thanks Jonathan. I appreciate it man
Nice! At the end of the day dewalt with its higher voltage wins as long as amp hours are the same or close. Benefits from operating at a higher voltage are increased efficiency and less amp demand from battery.
Interesting editing! Good luck man.
Thanks brother. Appreciate it✊. You know I’m a fan of the channel. Always have and always will man
Not even close to what’s going on here….
@@athannaelanderson3806 seems like it to me
@@makingstuff242 wrong blade, two different blades….
Nice work man! Saw dust for days!
Thanks buddy. This is the video where I had a 40 tooth blade on the Flex🤦🏻♂️🤦🏻♂️🤦🏻♂️😆. Guess that explains the thermal cut outs😆
Y did you use the say baddie both saws
Awesome layover type editing. I thought I was tripping for a minute until I caught on lol. Great video. This answers a lot of people's questions. How's your metabo rear handle doing? I just got my replacement in the mail a few days ago. I'm already putting it to the test again on site. Hopefully this one holds up.
Thanks buddy. The HPT is holding up well man. I mainly use it with a Steel demon blade for rebar but I love it for 2x material cross cutting. I went with an overlay blending effect on this one. It looked okay I guess lol. Wish it would have been more clearer but we can’t win them all bud
@@IMPACT-NATION That's good to hear about the Metabo but man the overlay was wicked cool. I really liked it and I'm sure others did too.
@@Tool_Addicted_Carpenter is that the Metabo HPT rear handle?
@@rickyperkins232 Ya I'm referring to the Metabo HPT rear handle. The reason I mentioned it was because I bought one that ended up not working within two weeks. It was a serious two weeks of putting a second floor on a house as well as all the sheathing but it was still only 2x4s and plywood so not exactly very abusive.
@@Tool_Addicted_Carpenter you probably got a Lemon because I think that saw is good just slow. Keep me updated because I have a Milwaukee rear as a backup to my FLEX that I may get rid of it for the Metabo(maybe).
That is disappointing to see but tell me that wasn't a finishing blade?
I ran that saw yesterday for the first time all day long, in the sun and it kept on going all day today and today it kept on going so far. I am very impressed even though I purposely leave it in the hot sun.
Monday I will bring out the Milwaukee rear handle to see if it is worth keeping.
I doubt the Milwaukee will be able to hang but let us know
@@Factoryseconds123 I meant to take it out today but I rushed out and forgot, I can tell you this it is almost 12:30 being running this from yesterday and the battery is not dead yet
Yep 40 tooth Diablo. I run the flex all day too buddy and it goes and goes. But on the jobsite we are usually not burying the blade in a 6x6 you know 😆. Yes this is extreme to run these saws so aggressively but I wanted to push them. The flex can make a couple full depth rips and that’s it. Game over until the battery cools down. I can put a framing blade on it but I doubt it will make much difference in the same test man. It’s a great saw and I love it. But when you run it hard non stop like this those pouch cells overheat. I didn’t mean to take anything away from the flex cause it’s an awesome tool
@@IMPACT-NATION this is a fact, it take more energy to run a 40 tooth blade in comparison to 24 tooth blade by far.
Put that 24 tooth DeWalt blade in that FLEX and I bet there won't be any cutting out on that dense lumber and test it with the so call inferior FLEX 12 amp hour battery as well.
@@IMPACT-NATION As a fencer PT 6x6’s are my bread and butter all day everyday. I’ve ripped those with my Flex circ saw no stalls, even before that my old Milwaukee circ saw could do it mind you not as quickly or as smooth as the Flex, and would stall with any blade deviation.
I'll take the flex. I like both, this is the first time that I've ever seen the dewalt out performed the flex circular saw.. both are great saws..though
To be honest man I can’t remember if it’s this video or a short I did. The flex kept cutting out cutting through hardwood against dewalt and my MAKITA xgt. It’s because I had a 40 tooth finish blade on it. The flex has more speed for sure. The flexvolt has more raw torque but the Flex is faster for sure. I tried not to like Flex at first cause I was deep in Milwaukee so I was a little biased but since then I’m absolutely hooked on Flex power tools. By far my favorite brand for sure. True beasts
They should have the same blade. Comparing a 24 tooth ripping blade, against a 40 tooth finish blade isn't very fair. Just saying.
Never said it was supposed to be fair
Hey man I get what you’re saying. It would definitely be more of a better comparison with the same blades. I was just working with what I had at the time. But I don’t think putting a framing blade on the flex saw would have kept it from cutting out. I appreciate the comment though and I definitely agree
@@IMPACT-NATION bro, bro, bro you were running the FLEX with a finish blade, you got to run that test again man. I am surprised the blade didn't get burned
@@rickyperkins232 your right man. Definitely should have put that blade on there. We live and learn brother
@@IMPACT-NATION it's all good bro.
Dewalt killed this test no ifs ands or buts
The Flex starts out beastly but I’m thinking maybe at such a demanding draw the pouch cells heat up quicker? Who knows bro. That Flexvolt is a bad mother I know that for sure. What’s up with you B? How you feeling brother?
@@IMPACT-NATION im still not 100% but alot better brother we had it at the same time what a coincidence 😅 how are you brother you all good. This is my third time catching that sht you would think it gets better but naw not for me it knocked me down fam was begging me to go to the hospital but naw I have responsibilities kids jobs going on no body will pay your bills for you bro... ive been watching everything on TV and not commenting as much sorry bro but let the truth be know and flexvolt killed it except that first test must be getting hot did you take a temp of the battery after high drain because the powerstack with the dcd800 gets so hot it shuts the tool down
@@TacticalThib DeWalt didn't win or come close
@@rickyperkins232 I think you need to watch this again brother...
@@TacticalThib there is a framing blade in the DeWalt but in the FLEX there is a finishing blade is the FLEX.
The DeWalt definitely has a 24 tooth blade but it looks a a 60 tooth blade in the FLEX and it still ran. DeWalt will no do that
good video.
Your too kind lol , but thank you. I’m still trying to find my groove brother
Makita is the king of circular saws. Dewalt has only the most power which is not enough to win the category. Dewalt really dropped the ball with the 54v they could have dominated the high demand tool category but i guess the platform didnt pan out as expected as they mostly do 18v stuff now. Do bad really
Too bad...
I couldn’t agree more. Check out all my latest shorts and videos. I run the XGT saws now. Absolutely love them man. Nothing smoother than a MAKITA👌. The Flex is actually faster than the Flexvolt from Dewalt wich is surprising. I like the Flexvolt but there is nothing smooth about it and the handle is way too close to the body
Fake as why is there hundreds of flex rear handle destroyong dewault,to make dewault look good i believe your forcing it to stsll if wrong my bad ! But it sure looks it !😅
great video that flexvolt is a beast. do you happen to know what rpm the flexvolt runs at
Dcs577 is 5800rpm I believe that may be the dewalt model he is using.
Yep 5800
You are correct my friend. 5800. The Flex is 6200. Makita XGT is 6400
You are correct my friend. 5800. The Flex is 6200. Makita XGT is 6400
Take that Flex 🤣Great video Brother loved the editing.👍💯😎
Barnaby just shit his pants!😆. Thanks buddy ✊
So hard to beat that Dewalt
They ain’t laughing this one off the JOBSITE are they bud?😆.
😎🛠️😎🛠️😎
✊😎✊😎✊❤️💯🙏
Always make your videos as unscientific as possible…for “best results.”
For the record, I’m most invested in DeWalt. But this is pathetic.
This is a False information ad.
Would be nice to see a video without overpowering empowering im gonna make it to the i cheated finish line, just gets old folks beating an opening up like it's new.
I hear you brother. The Flexvolt saw is the one I used the most because the power behind it. I just like the strongest high demand tools I can find not just performance but durability. I just prefer the Flex more. All opinions are my own so take from it what you want