Это видео недоступно.
Сожалеем об этом.
Honda signal wiring - short tutorial
HTML-код
- Опубликовано: 19 мар 2023
- Honda did a great job of being consistent on wiring harness colors, across all sizes of their bikes. This tutorial was made using a Honda CT90 setup, but should be very similar for any 1970’s Honda bike.
I personally can’t get enough of these electrical videos. It’s still my weakest area, but you make it look so simple. I learn more with each one. Thanks Mike!
👍🏻
it was simple and easy to understand .if you have to mention the cable itself they were of much better quality thick and solid .in new cars and motorbikes etc it is poor quality cables are so thin and fragile@@MiniBikeMike
Just what I need.. a ct90 signal light tutorial! I went from no signals to working signals after cleaning the contacts on my '78 but when the brake is depressed, the signals stop flashing. Release the brake and it's flashing again. The trouble with a 45 yr old bike is it's a 45 yrs old bike. Thanks for sharing Mike!
Thanks for taking the time to do this video. Great help as I am working on a Honda C50 In Ireland. All of us who never had the opportunity to work on these bikes and are trying to restore them, your help is invaluable. thanks Thomas
Thank you so much for these videos! My grandpa left me a Honda 90 to inherit when he passed and I've been trying to learn all I can to fix it. Videos like these beginner friendly ones are incredibly helpful. Thank you for taking the time to make them.
Thanks!
couldn't be any clearer than this. What a helpful video Mike! Thanks for taking the time and sharing the information. I am sure this would help so many people like it does for me!
Glad it was helpful!
Mike, what a great video, like you mentioned in the video it's much better to see it live . That was so nice of you to make a video for me. I believe others will benefit from this . I have followed your video to the tee and I learned a lot .
Thanks! I hope it helps. If you need further info, let me know.
What kindness to take the time to help someone, and teaching so many more in the process. This is one of my weak areas too. I appreciate and really enjoy all your CT videos. Thank you!
Thank you for watching and following along on the channel.
im glad you did this,this video right here can have the not so knowledgable learn this bike wiring
You may have done this many times but I appreciate you doing it again!!! Tell mama Warner, Terri said hi!!!!
She says “Hi” back. 👍🏻
I came here looking to troubleshoot a no spark issue on my neighbors trail 90 but this helps simplify the signals I am putting on my dual sport! Great video and good explanation, thank you!
Thanks!
excellent and clear presentation
Thanks.
Hey man! Just got me a 71’ ct90 with a modified 12v system. No stock blinkers so I’m gonna try my luck with wiring some. This video gives me hope, thank you!
👍🏻
I solved my problem so no need to answer. I just wanted to save you wasting your time doing so THANK YOU your awsome
So helpful, thanks so much.
Very nice video. Thank you for taking the time to make and post.
Thanks.
Thank you... Thank you! what an amazing reference for all of us
Thanks for watching and commenting!
Great tutorial! Thanks, Mike.
Thanks!
Very helpful video, thanks Mike!
Thank you!
Nice video, Mike ! Interesting !
Thanks!
So helpful! Thanks 🙏👊
Happy to help!
Excellent video
Thanks!
Yesss thanks love you breaking it down
Thanks!
Thanks again for the content
Thank you for watching!
Good job brother.
Thank you!
Thanks again, sir I mean doc
👍🏻
Thank you
looking at the socket for the indicator bulb it looks like the current that would hook left and right together would have to pass thru the bulb filiment POP !
Thank you for answering my question. Here is another one. on the turnsignal indicator light in the speedo the orange and lt. blue are hooked together at the bulb . seems like it should connect left and right together ??? any idea how they get isolated from each other.??? Really THANKS for your time
Great 👍
Hi Mike. Great tutorial, I've a 12v honda chaly and spent hours trying to get the head light and tail working. Not see my wife for hours ( bonus ) but I like how you've laid out the system for the turn signals. Can you do something or have you already got one?
can you do a complete vid on how this and a st90 wiring works?
excellent video thanks..My turn signals work but when on make the tail light blink opposite?? A lot of ct110s seem to have this problem (any ideas why)
Sounds like a grounding issue.
Hi there, I had a quick question about headlight options. I’ve been trying to use an LED headlight on the AC side of the rectifier on the headlight circuit and it keeps burning up LEDs and I did notice that around the light burns out the bike stumbles and dies but starts back up again and I am able to ride on. I did notice in testing the AC voltage fluctuates anywhere from 3V to 16v on that wire. All at idle. Any thoughts would be appreciated from anyone.
Unfortunately, I’ve never used an LED light or know anything about them.
So I've got a 1969 ct90. Then I've got a 1973 ct90 parts bike. The 69 has the turn signal switch. But I wanted to adopt the 73 blinkers front and back to the 69. I've heard that it was primarily wired. But it was left up to the United States state regulations to either put on the blinkers or not. Is this wire harness applicable to my 69?
Sorry, no clue. I’ve got a few CT90 parts, but I’ve never owned a complete bike or built one.
Been looking for the 69 since I was 12 years old. And I'm 44 now. I know that I'm making a franken bike. But I want to be safe on the road. And I'm not talking road trip. I'm talking car show.
I need help with my bike, any idea why when i have a my headlight on and use my right turn signal, it flashes the headlight and shuts off only the right front signal. The rear signal still says flashing. It doesn't happen to the left side of the bike. And when my headlight is off everything works fine... Any help would awesome thx.
Hey i have honda super cub c90 with me. And im struggling with the battery charging system. can you tell me what are the component i need to set that up? it will be really appriciated
Sorry, never worked on that model.
Can you make a video on how to connect tern signals and the hed light on a 1984 honda chaly
Watch this video, it shows how to hook up the turn signals for all little Hondas.
@@MiniBikeMike thanks i watched it and it helped me a lot!
🛑🛑 Mike…Can you please supply to me what you feel is the best Sprocket Combination that you recommend for an Ice Bear Champion?
What do I need to get??
Thank You.
😀👍
Great Videos!!
I watch every one. 💯
Leave the rear sprocket stock and install a 17t on the front. I think the chain has enough length that it won’t need modified. Here is front sprocket:
17t 420 17mm sprocket
amzn.to/3Ieyzxp
@@MiniBikeMike
Thank You so much.
I appreciate your knowledge, wisdom and expertise. 💯👍
👍🏻
Have you done a explanation on the headlight wiring like you did on this ?
By the way, I have a 69 s 90 honda
Would a bad regulator in 6v system cause signals to not light - 76 yamaha xt500?
Sorry, I’ve never owned a Yamaha. No clue as to how they’re wired.
@@MiniBikeMike thanks for response
I am getting power to both blue and orange wire in the back and I don't have lights at all up front do you need them to complete the circuit or can I just run signals out the back
You can run just back signals.
@@MiniBikeMike why the power to both left and right signals in either position
Contacts in the switch?
@@Beijingbiden Most likely.
@@MiniBikeMike turns out the indicator bulb on the blue wire is a dead short
no light blue on my harness,hmmm..theres a regular blue and an aqua blue
Any difference in wiring with a 84 ct110?
I doubt it. All Hondas are basically wired the same.
@MiniBikeMike I'm working on a LH switch right now and its a nightmare trying to get it working, and trying to find a replacement is hard, thats cheap... sorta.
@minibikemike I do have a question on an 84 ct110 the RH kill switch has a black wire and a brown w/ white stripe wire that I am confused where they go. Tried researching it and I haven't a clue where it goes.
@MiniBikeMike If you could do a tutorial on what wires go where in the headlight bucket it would be greatly appreciated
The kill switch wires should be a green and a black/white.