Yes Kurdish is right, as I heavily mention in vid we MUST set ram to Auto otherwise we’ll have texture issues. Also bear in mind pre loading shader cache when we first install does take some time but after will make textures better too 👍
@@PeteTalksTechwhy do we have to have it in auto. Is there no middle ground because I then see I have GPU detection issues when launching forza horizon 5 when in auto and I don’t want to have to restart when swapping games all the time
Honestly I've run it 900 p and 17 w. No in game graphics settings changes and done just fine. That is My favorite thing about the Ally X. Minimal tweaking required
I was able to run COD at 40+FPS without changing anything other than dropping to 900 p in turbo. Still solid on 17 w. You know me. The fewer clicks to get me in my game,, the happier I'll be.
I really have to disagree with using NIS over FSR in any scenario. 😅 But each to their own. Now that the scallers are fixed I highly recommend using FSR 3 and FSR Frame Gen and youll never drop bellow 90FPS in zombies I was getting 115FPS on everything set to high and particals, shadows etc at Norma (turn depth of field off and water) and reduce motion blur and hey presto! You can further increase stability by having dynamic resolution at 60fps goal and FSR 3 will do a way bwtter job upscaling it back to 1080p than NIS
Im having stuttering issue when i set my assigned gpu to auto, sweet spot is always 6 on my rog ally x,and also i cannot see much difference when seting graphics on ultra,high is more than enough and you will get 100+ fps
Great question! Both are very similar and definitely worth experimenting with, to my eyes I gravitated towards NIS over FSR3 but it's defo a personal choice, as is stuff like 900p, increasing visual options to lower fps too so I'd love to hear what tweaks you and our great viewers find is best! 👍
@PeteTalksTech I'm not sure. I checked a few settings NAT is open, I average around 500mbps on the Ally as well. I'm not sure if there's anything else I could look at in my router settings. Maybe there's some ports or something that need looking at. Thanks for your response 🙂
Yes these settings have gave me frequent packet bursts and extrapolation, it is something to do with the CPU not the router, try setting your vram usage to 8G not auto
Great question Joseph! Yes these will absolutely benefit z1 extreme, and we'll get an extra 5-10fps using these settings on Ally X just like all games due to the extra RAM that the Ally X has...
After doing all this has gave me insane packet burst and extrapolation issues, didn't have them before changing all these settings, wouldn't recommend doing this.
Is it possible to play offline at all with the campaign? The separate loading from the main menu to campaign is getting annoying. Far to many steps now just to play
I’m trying to play on my ROG ally but it’s mixing controller binds with keyboard binds and it’s not showing the tips as a controller but as a keyboard letters . How do I fix this ?!?
Not related to call of duty in anyway. But I've got a trip coming up to the US so a 9 hour flight. I was wondering if you or anyone in the community could recommend some low powered games to get me through most of the flight I'll have an Anker 24,000 mah battery with me as well as the original ally battery. Thanks for any help
Great question! I’d recommend Balatro and Vampire Survivors - both run on Silent so like 8 plus hours on Ally X, and both are sooooo addictive! Then of course lots of old school SNES games too!
Pancake loves her little head massages, so glad I was able to capture it as this is my fave Pancake Intermission so far! 🥰🤩 So a big “Hi!” and give lots of head massages to all your cats from me and Pancake catsanova! 🤩🐈
Follow my 14 step optimisation guide below and also turn off all AMD app options like RSR etc as this may clash with BO6... ruclips.net/video/D0hDGZVOXNE/видео.htmlsi=koN0-rluzQmsfx8X
I'm sorry but I never had to increase from 17w ever on any game I've played on my Ally X. I've tested games from COD warzone, cyberpunk 2077, spiderman, halo, fallout4 and gta 5 and many more titles. Never seen a reason to use 25w or even 30w as all the games play smooth as long as you config each game
Follow my 14 step optimisation guide below and also turn off all AMD app options like RSR etc as this may clash with BO6… 14 ESSENTIAL steps to OPTIMISE your ROG Ally & Ally X ruclips.net/video/D0hDGZVOXNE/видео.html
Hey worm have you managed to do my 14 step optimisation guide that makes a huge difference? 👇 14 ESSENTIAL steps to OPTIMISE your ROG Ally & Ally X ruclips.net/video/D0hDGZVOXNE/видео.html
I guess a lot of people love ‘trash’ haha! Yes Frank I’d say the Pancake Intermission in this vid is prob my fave so far, so glad I was able to catch Pancake enjoying a little head massage that she loves so much 🤩🤩🐈🐈
Share your thoughts and any tips for COD: Black Ops 6 below! 👇
Anyone experiencing level designs/details still rendering? Beta was more smoother than rn on the ally x
Yea I do experience that on my ROG ALLY Z1 extreme
Change vram to auto
Yes Kurdish is right, as I heavily mention in vid we MUST set ram to Auto otherwise we’ll have texture issues.
Also bear in mind pre loading shader cache when we first install does take some time but after will make textures better too 👍
Your setting is probably set to performance which adjusts things to accomodate your specs.
@@PeteTalksTechwhy do we have to have it in auto. Is there no middle ground because I then see I have GPU detection issues when launching forza horizon 5 when in auto and I don’t want to have to restart when swapping games all the time
Your video on this is definitely the best !
Wow this means a lot, thanks so much clapper! 🙌
Honestly I've run it 900 p and 17 w. No in game graphics settings changes and done just fine. That is My favorite thing about the Ally X. Minimal tweaking required
see - i did the same on my first try, and i must say, every character looks like a doll up close 😂
I was able to run COD at 40+FPS without changing anything other than dropping to 900 p in turbo. Still solid on 17 w. You know me. The fewer clicks to get me in my game,, the happier I'll be.
Haha nice Throne Room! 🤩
When I apply these settings on Quality it sets graphic preset to "custom" it won't save as ultra with those settings
I really have to disagree with using NIS over FSR in any scenario. 😅 But each to their own. Now that the scallers are fixed I highly recommend using FSR 3 and FSR Frame Gen and youll never drop bellow 90FPS in zombies I was getting 115FPS on everything set to high and particals, shadows etc at Norma (turn depth of field off and water) and reduce motion blur and hey presto! You can further increase stability by having dynamic resolution at 60fps goal and FSR 3 will do a way bwtter job upscaling it back to 1080p than NIS
Thanks for sharing beta, yes after playing around more after making this vid I think FSR3 prob is slightly better than NIS 👍
How long does the battery last with these settings set like in this vid?
I’d say around 2 1/2 to 3 hours depending on screen brightness etc 👍
running at 126 +fps on my legion go smooth asf boi
You cant play long on the legion go without akku😂😂😂i play with full battery 4 Hours on 17 Watts !!!
Is it safe for the gpu % to be that high… jus curious
Yep, the Ally X is pretty durable for intense games like this 👍
Im getting a basic menu with no fsr, quality options or anything - any ideas ?
Legend! Just the video I needed
Awesome clev!
What are you using to monitor your performance? It looks really clean.
Just the standard inbuilt Monitor within Command Centre on the Row setting 👍
Thank you Pete I was struggling to get this to run optimally
🙌
Why can set render resolution to 100?
Me too
Me too
Same hope he reaches back
Because you’re using scaling and scaling reduces reolsution you ether run at 100 or use any scaling technique that’s it
Im having stuttering issue when i set my assigned gpu to auto, sweet spot is always 6 on my rog ally x,and also i cannot see much difference when seting graphics on ultra,high is more than enough and you will get 100+ fps
Can you write down please graphics settings also the resolution?
I’m not able to change the render resolution it’s stuck on 59 instead of 100 please help
Same here🤷🏾♂️
I temporarily set upscaling option to off, then changed render resolution, then changed upscaling back
Anyone know how to reduce motion sickness in this game or if there is a setting?
Yes in Settings there’s a Reduce Motion Sickness toggle thankfully - I suffer with motion sickness too so this is essential for us! 😅
which settings?
I tried your setting there great thanks !
Awesome Justin! I want to give credit to ROG Ally Life and check them out here! 👇
rogallylife.com
Thanks! What's the benefit of NVIDIA scaling vs FSR 3? And can we move down to 900p?
Great question! Both are very similar and definitely worth experimenting with, to my eyes I gravitated towards NIS over FSR3 but it's defo a personal choice, as is stuff like 900p, increasing visual options to lower fps too so I'd love to hear what tweaks you and our great viewers find is best! 👍
Nvidea image scaling is known to be better than fsr
@@_different_scenezyup this 🙌
How can you run NVIDIA scaling on an AMD chip?!
Good question but it works great! 🤷
The response told you all you need to know these people have no idea wtf they are talking about just clicking shit and praying
Hey thanks for this, any idea why im constantly getting packet burts though and what could be causing it?
Thanks Egg, hmm not sure about packet bursts, is this something related to your router do our viewers know as I haven’t experienced this? 🤔
@PeteTalksTech I'm not sure. I checked a few settings NAT is open, I average around 500mbps on the Ally as well. I'm not sure if there's anything else I could look at in my router settings. Maybe there's some ports or something that need looking at. Thanks for your response 🙂
@@SgtChuckyEggCOD servers are terrible, that could be why
Yes these settings have gave me frequent packet bursts and extrapolation, it is something to do with the CPU not the router, try setting your vram usage to 8G not auto
Will these settings fry my sd card? I have the original rog ally. Not the extreme
It’s a risk whatever high end intense game we play regarding frying the sd card on the OG Ally, thankfully the Ally X doesn’t have this problem 😅😅
Thanks for the great setting 🎉🎉🎉🎉🎉
Thanks Kawaties! I want to give a special shout out to ROG Ally Life check them out here:
rogallylife.com
Does anyone know the best way to get rid of the constant stuttering specifically during the campaign? Its driving me nuts
Will these settings benefit the z1 extreme or will performance differ from the x model?
Great question Joseph! Yes these will absolutely benefit z1 extreme, and we'll get an extra 5-10fps using these settings on Ally X just like all games due to the extra RAM that the Ally X has...
Thanks 💪🏽
Happy to help hakan! 🙌
After doing all this has gave me insane packet burst and extrapolation issues, didn't have them before changing all these settings, wouldn't recommend doing this.
I’m having issue where mine now won’t launch at all
Do you play with AMD rsr on?
I turned everything off in the AMD app 👍
Is it possible to play offline at all with the campaign? The separate loading from the main menu to campaign is getting annoying. Far to many steps now just to play
Ah yes it is annoying, the menus are very convoluted, I have a feeling it's all online even the campaign but I could be wrong...
Can’t play anything offline. If you want to play black ops 6 you have to always be online no matter what.
Sparking zero is black screening on my ally x plz help
I’m trying to play on my ROG ally but it’s mixing controller binds with keyboard binds and it’s not showing the tips as a controller but as a keyboard letters . How do I fix this ?!?
@@TastyyTanner gamepad mode?
Yes have ya selected Gamepad and not Auto or Desktop in Control Mode within Command Centre?
I keep getting bad server lantecy and fps keeps dropping anyone know why?
Not related to call of duty in anyway. But I've got a trip coming up to the US so a 9 hour flight. I was wondering if you or anyone in the community could recommend some low powered games to get me through most of the flight I'll have an Anker 24,000 mah battery with me as well as the original ally battery. Thanks for any help
If you're into rogue, it's say dead cells or neon abyss. You can put so many hours into those, and they're not too demanding
Great question! I’d recommend Balatro and Vampire Survivors - both run on Silent so like 8 plus hours on Ally X, and both are sooooo addictive!
Then of course lots of old school SNES games too!
👍🏻 thanks for the recommendations guys
Hello!! Pancake looking so comfy today 😺😺
Pancake loves her little head massages, so glad I was able to capture it as this is my fave Pancake Intermission so far! 🥰🤩
So a big “Hi!” and give lots of head massages to all your cats from me and Pancake catsanova! 🤩🐈
it doesn't let me type in my username and password
Gotta say thanks, thats worlds better than what i was dealing with. The rendering was horrible.
Ace! Yeah esp VRAM on anything other than Auto loads textures horrendously…
My game keeps freezing and crashing every time I apply the settings…
Follow my 14 step optimisation guide below and also turn off all AMD app options like
RSR etc as this may clash with BO6...
ruclips.net/video/D0hDGZVOXNE/видео.htmlsi=koN0-rluzQmsfx8X
I'm sorry but I never had to increase from 17w ever on any game I've played on my Ally X. I've tested games from COD warzone, cyberpunk 2077, spiderman, halo, fallout4 and gta 5 and many more titles. Never seen a reason to use 25w or even 30w as all the games play smooth as long as you config each game
Whats the game at 4:11 ?
It’s a benchmark
Rooo it’s the third level on the COD: BO6 campaign 👍
Does anybody else not have the auto setting?
i just deleted forza horizon 4 to download it and it’s been amazing ❤❤❤❤❤❤
Ace! Yep I’m totally addicted, BO6 is the best COD in years!! 🔥🔥
I’m getting ártifacts I believe only on cod tho
Follow my 14 step optimisation guide below and also turn off all AMD app options like RSR etc as this may clash with BO6…
14 ESSENTIAL steps to OPTIMISE your ROG Ally & Ally X
ruclips.net/video/D0hDGZVOXNE/видео.html
Did some optimizing, best setting to use is fsr 3 everything on low. On zombies I constantly hit 60 and above fps
Chose these exact settings and still only get 50fps ish on ally x
Hey worm have you managed to do my 14 step optimisation guide that makes a huge difference? 👇
14 ESSENTIAL steps to OPTIMISE your ROG Ally & Ally X
ruclips.net/video/D0hDGZVOXNE/видео.html
@PeteTalksTech my bad had it on fsr3 not nvidia scaling
Ahhh 👍
Black Ops 6 movements seem super sensitive even with the controllers set at low. Anyone else find this?
I’m running the same controller sensitivity as I did on MW3 and it’s the same as I use on an Xbox controller too. Check your dead zones
@@cobynweston8124 already set dead zones to zero. Right stick movement just seems way faster than MW3
Play a better game, not this yearly trash. it'll help.
@@FrankHolder-v9e you could just play shit you enjoy instead of shit talking, ya fkn goofball
Thats the thing i hate so much that some games dont take advantage of auto and other games need set vram its annoying af and other games need auto
Anyone experience doll hair and bad graphics? On rog ally z1 extreme?
These settings made my ally X have lesser fps than balanced and the textures barely load or look like a game it game
Did you switch vram to Auto?
@PeteTalksTech yes sir, also isn't the Nvidia upscaler and fsr3 broken for the game? I think only fsr1 is actually working.
Nvidia upscalar works great in my testing!
No thanks
A better question would be why do people still play this crap? CoD is utter trash. (btw Pancake is lovely!!)
I guess a lot of people love ‘trash’ haha! Yes Frank I’d say the Pancake Intermission in this vid is prob my fave so far, so glad I was able to catch Pancake enjoying a little head massage that she loves so much 🤩🤩🐈🐈
I think it is just for the sake of the Black Ops series.
To be fair I’m loving this BO6 better than any COD made in the last few years…
For some reason my ROG ally x keeps crashing in the menu 🤦♂️
Perhaps it’s just crashing while it loads all the shaders which takes a little bit of time?
@ ohhhh yup it let it load all of it and it stopped crashing
Ace dj!