Homemade Air Raid Siren - Test - Nicolas Salenc PBP
HTML-код
- Опубликовано: 2 мар 2019
- Check out my website for STL models and detailed plans right here:
salencnicolas.wixsite.com/web...
The parts were all printed with this 250$ 3D printer:
rover.ebay.com/rover/1/711-532...
Just a quick video about my 3D printed air raid siren. The design was inspired by the WW2 carter air raid siren, so it should sound pretty similar!
The thunderbolt video is from Charlie Davidson
• Thunderbolt 1000T Torn...
The ACA allertor video is from openblast64
• ACA Allertor 125 siren...
Like and subsD cribe!
One of the best homemade sirens I’ve ever heard. Perfect siren pitch (RPMs)! Amazing job!
TRAINSANDSIRENS helloooooooooooooooooooooooo. how zit goin bud
It is a pretty good siren.
@@brandonburkest6229 i wish i had a 3d printer. but i am building sirens. one of my people in my family knows how to do all that stuff
Hi Thunderbolt siren
Great for telling children it’s time for dinner…
Glad to see you have some knowledge about sirens! But there's one thing... Not all thunderbolts are dual tone. The Thunderbolt 1000 Is single tone and the Thunderbolt 1000T Is dual tone, and the Thunderbolt 1003 is dual tone, and has solenoids, allowing it to do Hi-Lo. There is also a blower at the bottom that supercharges the siren's rotor, allowing it to have that really demanding "TAKE COVER NOW!!" sound. But these blowers also have different variants, which are the 3M, 4M, 5M, 6M (A1), and 7M (I think don't quote me).
Nice siren. Sounds better than most I've heard.
Very simple and yet so cool!
I had no idea that mechanical sirens were a thing.
Great video idea :D
Do you rember the little party favor whistles that you blow and makes that quick funny whistle sound it's the same sound effect that's used when a cartoon character slips and falls down the whistle looks like a small little plastic cylinder with a small little disc inside with impellers and then the just like this siren there are ports for air to exit while the disc inside spins as you blow air into the whistle air spins the disc air travels through the impellers while air exits the whistle through the ports the air you blow gets chopped up whenever the each impeller lands on an open port compressing the passage of air just like when you whistle the smaller the opening and harder you whistle the louder it gets in this case the faster the chopper spins the more air the louder the siren gets.
Hello
2:13
It sounds like the broadmoor siren! Very High detail! Well done!
it sounds like british carter 1939 ww2 siren
edit: omg u just dont even know how rare this kind of siren is..
VasyaTheSlav he built an air raid siren..... I think he would know quite a bit about sirens too
6mm7tutubeug 4 t rmrhhfhydjr
@@hickmanism I agree.
there are a few sirens like this in Canada, but all of the active ones belong to small town fire depts.
10/12 port
Well that's one way to get to know your neighbours! LOL
2:13 HERE WE GO POWER UP THE BEAST
Love it:)
no way i just got intrested in sirens yesterday
Same!
Exactly like a carter air raid siren ! Nice!👍👍👍👍👍👍👏
2:18
You got the sound bang on there. Sounds amazing through a 12K bass rig.
YOU DID A FANTASTIC JOB ON MAKING THAT SIREN!!!! I AM LOOKING FOR ONE MYSELF. DONT HAVE A 3D PRINTER TO DO IT, BUT ANYWAY KEEP UP THE GREAT WORK ON MAKING THEM!!!
Bought your files… have already printed the stator, on to the rotor now. So good. You nailed the tone.
Wow, that siren sounds fantastic!
Wow! That genuinely sounds like a Carter / Klaxon siren. This video has definitely got a like from me!
This is so good. Definitely one of the best home made sirens
I remember watching this video a few years back, came back for some nostalgia! I'm also stoked that you voiced one of my favorite characters from Satellite City, I just found that out lol.
I wish I had a 3-D printer.
Spartan studios Productions you can get some pretty cheap ones now a days. the cheapest one i can think of is $100 that’s fully build and ready to be used there are some you can build yourself that might be a little cheaper
I want 3D printer too.
I have one but my stupid printing software doesn't work
Mine cost me a little less than $300
BroadmoorSirenFan YT tinkercad use it
Amazing sweet sounding siren there my friend well done
Wait WHAT?? You are actually also into Sirens too?! I didn’t expect you to know what a Thunderbolt was!
Yep! Been recording them since I was a kid... weird freakin' hobby... xD
Nicolas Salenc PBP I actually wanted a Thunderbolt at one point. There are some people who actually own some lol. I was in that hobby for the mechanical stuff
@@Creeperboy099 Make one! It's a lot more fun x)
Nicolas Salenc PBP have been
I have quite an engineer in me but don’t have the resources
I did make a siren once though but it was crude
@@NicolasSalencPBP i have a 2t22 xd
Wow, this sounds really good! 👍🔊
Best sounding printed siren on RUclips.
Awesome work - that is very cool!! I wanted to build one of these out of a bench grinder years ago, before 3D printers existed in the consumer market!
(Thanks for the link/credit for my video btw!!)
Really awesome Nicolas - - great job !
Nice project man!
Sounds like Carter siren.
Dj Mario it’s because it’s 10/12 ports like a carter
@@halpmeamcringe1538 it can also run 5/6 ports the canadian carter also ran 20/24 ports
Correct.
Thanks for showing this! I'm helping a guy on r/AirRaidSirens create a siren of his own, and your instructions in the description really help out!
excellent. Now a bowl to direct the sound. Only the outside edge of the spinning rotor needs to be close to make it louder right? So if you tapered the ends you could cut it with an exacto knife to minimize opening?
When u get used to all ur alarms and you gotta spice it up to get out of bed
Now you've gone and pissed off my wife by convincing me to build one of these.....
For a 3D printed siren it looks really well-balanced :) Did you balance it after printing?
Best investment for a STL ever, thanks and greetings from Germany.
Wow that sounds great!!!
You should make more 3D printed sirens, I like them 😁👍
Nice 10/12 Carter Sound!
Yeah this is way better sound than any of the ones you can just go out and buy online or on Amazon unless your lucky enough to your hands on an actual honest to goodness retired ar siren. Question though. If you were wanting to put one of these outside and wanted to build the turbine out of a more weather resistant part what metal composition would you recommend to print this with?
very well done
Phenomenal man.
Great for a home alarm system. Nice video.
that is a beautiful sound
Spot on with a Carter siren from WW2! Motor speed is 2850 rpm at max.
Superb man
Shawn woods brought me here, this is better than expected.
Amazing sound
Germany:dad I made a flying buzz bomb
Germany's dad:cool son lets try it out
Britan:why do I hear sirens
I consider the Tbolt a dual tone AND single tone, because it creates an overtone with the dual-tone chopper interacting with the blower.
Great siren
Amazing 🤩
Wow , Impressionant , Super video :)
O melhor que eu já achei 💪🏻
That's awesome.
Now that's a real siren sound. I'm gonna hook one up to my truck, lol. Great design! Can a Triple be made with one rotor putting out a lower bass tone?
Very Cleaver ! Thanks
Your neighbors will love you soooooo much.
That’s cool sounded just like the one on the base
I’d like to see you test a siren with like 10 or 20 chambers with different tones or just way bigger chambers
That's awesome
Cool siren👍😅
The Thunderbolt 1000T and the 1003 are dual toned.
The best one ever its the same sound as castle casting siren
great pitch, but how do you decide when it should be running>?/
How loud is it? (Did you make a dezibel test?)
where can you get the 3d printed item to put on to a bench grinder to make the Air Raid Siren sound ?
Sounds just like a Carter or Castle castings!!
Some Thunderbolts are single tone and ACA p50s are dual tone Sirens too
How about using a more dissonant interval like the tritone? (frequency 1 : sqr (2))
what would you charge for the stators to make for the bench grinder you had on you tube i like the double ones for the sound i would need a set of 2. thanks
print them
Have you thought about making a siren with eight and 12 ports? As it would probably be a really unique sounding siren
Thunderbolts are pretty famous for the compact 5/6 port rotor
Hi nice homemade siren Could you do a distance Siren test?
Nice
You should design a manual shutter / damper for this! Would be cool to hear it do pulse. Anyways good video! 😊
I just bought your files! Very nice, thanks! Is it possible to get the SolidWorks files for this as well?
Hi! Nice Shit! Did you have to balance the rotor and if so, how did you do it?
The first diy siren that sounds like a real siren
I did not expect a Carter siren, but if you put the motors on the side to make it cool,
Sounds exactly like the British Carter siren ! If you can get it going a bit faster it will sound like a 2T22
Nice explanation and siren but what's the port ratio example 9/12, 8/10.
Chopper and stator assembly. Also don't forget the XT22!
Also add a horn to it. It will project the sound that way
Very well made siren! What is the port ratio? Sounds like 10/12 on 50hz.
yep, 10-12 at around 3000rpm is roughly what our sirens have.
Yes indeed, 10/12 ports and he's French so 50 Hz power ! He also recently uploaded a video of a homemade French KM Europ 8 port siren which also sounds spot on. He tested it outside and to avoid any annoyance he did it during an actual siren test
Most authentic sound I’ve heard from a homemade siren, great job 😃👍👌👏👏👏
I love air raid sirens, my grandpa too!
Just bought the STL files for this. $3.99! Now I need a bench grinder! Distance recording?
The elder neighbor: GET THE KIDS HONEY!!!!! THERES A INVASION GOING ON!!!!
Hi Nicolas, do you hava the dimensions to print in Brazil one Air siren?
So, what would a four stage one sound like?
I'm having some huge problems printing the stator any help?
what printer settings did you take
hey i just printed this and wasted 30$ of filament and supports wouldnt come out i would like to know how to get them out or id like money for new filament
#Nicolas Salanc , mmm I have a bench grinder and want to create an air raid siron as finding a ww2 original is hard . Can u make the bits required and how much plz
Air the plans available for this..i want to build one for my garage
Can I buy a set from you?
I NEED THIS
Man that’s sweet
What programmer did u use to create the model
Is there any way you could print one and ship it. I do not have access to a 3D printer. I have a 6in harbor freight bench grinder for the project.
My son is obsessed with any and all federal signal sirens and I'm trying to build him one.
I'm buying one of your siren files your parts. I'm going to turn it into an omnidirectional fire siren. And make a siren shroud for it by the way that's a good video!
How did you get the 10/12 port?
I’m struggling printing the stator. Any tips? Infill density 100, what is best bed temp and nozzle temp? I’m using 1.75 pla. Printer is a Creality 3D Ender 3 V2 Neo! I’m a complete novice at this so go easy on me 😂
I usually print at 220°C nozzle, 60°C bed temp
@@NicolasSalencPBP thanks for the reply 😁. It’s failed twice now I think it’s support settings 😔
This actually sounds like the world war 2 siren