Wow your creations blow me away every time Mr. Royer. They arent just blades they're more like concentrations of effort put out into the universe. One day I have a feeling these ate going to be genuine treasures in a museum or something. (Also thank you for being a huge inspiration into my own smithing! You're truly one of my hero's! I'd kill to apprentice under you!)
The amount of work and detail that goes into places that most people will never really see, is what really gets me, incredible detail work like this and attention to the small stuff, is why kyle is a master smith.
I just realized the most important aspect of your work vs. other knife makers work as I was watching this video... Its your integrity! Attention to detail is one thing, I pay close attention to detail in my trade and what I do. Great knife makers pay close attention to detail, but you go much farther in your craft- you have integrity and honor! Nothing is finished until it is as perfect as humanly possible. That little speck of imperfection in the handle may never have been seen be the new owner but you made sure it was repaired. I would never in a million years caused harm to the knife but you repaired it. That is a man of Integrity and Honor. That puts you in a class above all others. Goodonya young lad Goodonya! I aim for your integrity and honor in my business and ministry. There are very few in your category.
Hey Kyle... I’ve been making knives on and off since I was 14... I’m 50 now. I’ve learnt more watching you than I have in the last 30 years. You’re a the knife maker’s, knife maker! I think this is evidenced with seeing your tools, techniques and styles being copied by more successful “youtubers”, I place that word in, inverted commas because some ‘knife makers’ and smiths are more about RUclips than they are about the smithing...I’m so pleased to see you making a real go of it mate, best of luck and keep up the fine work....
Ничего не понимаю что говорите, ну вот работа ваша, это высший пилотаж , вас смотрят не только англоязычные , сделайте чтоб было понятно и нам ,,, Уважаю людей у которых руки растут с правильного места, с уважением из Чечни.
5 am here, Enjoying your videos in my early breaskfast...Kyle, you flow so great with your work...You have infected me with enthusiasm! I'm going to throw everything out of the breakfast room and run away to make a knife! Many Many Many Thanks!!!
Thanks Maximiliano. What a cool name. Hey you reaching out to us is also very encouraging. I’m going to read your message to the entire team here. Cheers Team Royer
The details that you explain in the process is what sets you apart from a knowledge perspective even for a newbie 👍 The details on the handle is just too good with all.the extra work and precision
i just stumbled across your videos. my wife and i are blown away. i have no other words to describe it. this is phenomenal but that mosaic sword you made was built for kings.
Hey thanks rowdy and mrs rowdy. Glad you’re enjoying the vids. We have another spectacular sword build coming very soon. Be safe and be careful. Cheers. Dad
Thanks Kyle. Very honest craftsmanship. That small flaw in wood and its repair could've been edited but great learning moment for me. The end result is a peice of beauty that I wish I could hold in my hands and look at it to calm my mind. Thank you so much again...
Your craftmanship and attention to detail is on a whole different level!!! Love your videos, I've learned alot watching them! Thanks for share your knowledge!!!
Hey Doxnogle we all start at the same place. Just start. I’ve been out in the shop making knives for around 2years and a lot of Kyle’s moves are starting to sink in . Today is the best time to start! Dad
Thank you so much! My brother Josh dose all the video work. My other brother Caleb just takes professional still pictures . :) . Josh and I are the only ones who do the RUclips thing. Oh, and my dad helps too! :)
The knife is nice looking over all. The blade is clean and not over polished. The handle is gorgeous with the buffed steel. I see a lot of master Smith’s shine every thing. It’s beautiful and all but what if you want to use it. Very well presented.
I love your work! It was so incredible satisfying watching it come together, like that first sip of fresh coffee in the morning and you just go ahhhhh!!!
Every time Kyle says "There is a little more sanding to do"... I think - "Hell I would of called that good a long time ago!".... That's what makes you a master sir!
Absolutely in love with your work ! So glad to have discovered your channel to follow up the creation of this piece of art, part after part. Great craftsmanship, keep up with the good work, Kyle !
I dedicate myself to the forge and follow your work and it is a pleasure to see you work, keep recording your works of art that it is a pleasure to see you work, greetings from Spain
For me the best part of the video starts at 12:50 . Caleb, Chapeau. Realy clever instead of moving the camera to move the lightsource... looks awsome. Like the presentation of a new super sportscar.
@@KyleRoyerKnives Sorry, Josh. Jesus, one day you have to present yourselves so that we know who is responsable for which part in you family business. I thought caleb would do the recording and editing. Sorry for that.
this is a remarkable piece, from the "museum fitting" to the different grits in the blade, I'm amazed from you work. You are a really great artist and craftsman. thanks for sharing you knowledge with us!
Your videos make a little sad, only knowing that I'll never be able to afford that truly mesmerizing piece of art. I can't thank you enough for sharing!
@@KyleRoyerKnives thanks for the response! I hate to be a bother, but how much would you charge for a relatively simple (compared to your work) langes messer with a swept hilt/complex guard?
You sir are a master..👍👍 I wish I had half of the tools you have. I use cheap Harbor Freight tools. My forge I found in the dump.(I guess the original owner moved on) It is made up of a 6" main pipe with a bent 3" pipe welded to it so a hair dryer will fit in the other end to force air up..On top It has a brake drum welded to the top of the six inch pipe and a old saw blade welded in the center..I take it outside and push in down into the ground. I use charcoal. I use cheap steel from Lowes or Home Depot for blades and guards and cabinet knobs for pommels. Oak dowels for handle scales or what ever I find or have laying around... Can't get much on a police disability so I work what I can afford or find... Keep up the good work. I enjoy your videos.
Hey Wolf You got it going on 👍🏻🔥☕️ Go with what you got 🔥 Try to scrounge up some old leaf or coil springs. The carbon content in the spring steel will get you a superior blade compared to mild low carbon steel You Keep Forging On Wolf Be safe and be careful May God bless you . Dad
Kyle, you should do a collaboration with Alec Steele. He could bring you a lot of views to your site....and you could show him some of your skills! You are the best I've seen! Beautiful piece.
Needless to say, it's an absolute masterpiece! I wish you 1mln subscribers by year end, because there's simply no such knifemaker on YT willing to share their crazy skills like yours!
Could you add some of the different sanding papers and such to help us understand how you go about shaping the parts? You are a great instructor...a sign mastery is to be able to teach what you know to another. Thanks!
I really enjoy watching you make your knives. Really works of Art that you make. I was just wondering if you had a video about yourself, like where, and how you got your training, and how you became interested in knife making. Again thank you for sharing your skills with us.
You really did some fine work there. I watched each video and was more impressed at each stage of the build. The craftsmanship was absolutely superb. Only problem is that you made it look so easy, and I know from experience that it is anything but.
Thanks James We have a How to build a Bowie course coming out in early December. With some basic skills and tools you should be able to build a similar knife Team Royer
This has been an excellent tutorial. Thank you so much for sharing your knowledge and experience. I have learned a lot. You demonstrated and explained everything very well. The knife turned out beautifully and that fit and finish perfect.
Your the man kyle, your work is amazing and your videos are kick ass, you are a great RUclips teacher and one of my favorite RUclips's, keep up the AMAZING content!
Very nice. Some serious skill there. I have been making knives for a while started on bushcraft knives now doing kitchen knives. Will attempt a bowie next. I have no belt grinder so a lot of filing on my bevels. Thanks for the video
Hey thanks robg if you’re interested in leveling up your skills for that Bowie we are able to help with our “How to build a Bowie “ online course at learnknifemaking.com. 👍🏻☕️🔥⚔️ Dad
Well I would love to hangout with local makers but as far as I know I’m the only one ina forty mile distance and we have crap laws over here but still I love it
I have never liked dyed wood, being of the opinion that wood is among the most beautiful of materials if it is just oiled and used. That particular piece is amazing, I agree with you it does strongly remind me of Starry Night. Superb Craftsmanship on that knife.
What a wonderful piece of ART that is also functional. Thanks for sharing, the information you gave will be most helpful to me as well as others. This knife is so beautiful kinda stealthily.
Absolutely gorgeous Bowie, Kyle! I particularly like how you accented the spine & swedge. And the color of that redwood burl is incredible. Your comparison to Van Gogh's 'Starry Night' is totally accurate. If I owned this beautiful blade, I think I would name it 'Starry Knight', or the 'Dark Knight'.
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
I hope you guys enjoy this video! I am looking forward to the next project! :)
KyleRoyerKnives what kind of belt are you using on that guard???
Amazing craftsmanship! Thank you for sharing your work, I can't wait to see what you make next
Fore sure, See you. Greetings from Germany 👍👏👌
Awesome knife 👍👍
Wow your creations blow me away every time Mr. Royer. They arent just blades they're more like concentrations of effort put out into the universe. One day I have a feeling these ate going to be genuine treasures in a museum or something. (Also thank you for being a huge inspiration into my own smithing! You're truly one of my hero's! I'd kill to apprentice under you!)
The amount of work and detail that goes into places that most people will never really see, is what really gets me, incredible detail work like this and attention to the small stuff, is why kyle is a master smith.
Thanks Wind
Kyle
@@KyleRoyerKnives Love your channel, positivity and work ethic, really shows through in the pieces you forge. Your whole family seems awesome haha.
I just realized the most important aspect of your work vs. other knife makers work as I was watching this video... Its your integrity! Attention to detail is one thing, I pay close attention to detail in my trade and what I do. Great knife makers pay close attention to detail, but you go much farther in your craft- you have integrity and honor! Nothing is finished until it is as perfect as humanly possible. That little speck of imperfection in the handle may never have been seen be the new owner but you made sure it was repaired. I would never in a million years caused harm to the knife but you repaired it. That is a man of Integrity and Honor. That puts you in a class above all others. Goodonya young lad Goodonya!
I aim for your integrity and honor in my business and ministry. There are very few in your category.
Thanks for your kind words Brady
Kyle
Lovely as always! Thanks for sharing your process! Just like what we try to do...less “like what I can do and more look what you can do”.
The final reveal shot at 12:50 gave me a chill. Huge props to videographer. Stunning knife, as always. 👍👍
Thanks Shawn
Josh
I've grown to love file work. Excellent and inspiring.
Hey Kyle... I’ve been making knives on and off since I was 14... I’m 50 now. I’ve learnt more watching you than I have in the last 30 years. You’re a the knife maker’s, knife maker! I think this is evidenced with seeing your tools, techniques and styles being copied by more successful “youtubers”, I place that word in, inverted commas because some ‘knife makers’ and smiths are more about RUclips than they are about the smithing...I’m so pleased to see you making a real go of it mate, best of luck and keep up the fine work....
Thanks for the shout out Espo!
There’s more coming
facebook.com/ATinkersCuss/
Kyle, your attention to detail is second to none. Very very nice work
Hey thanks Seth
Excellent, This video has taught me a few things about guard installation that I have been been wondering about for years.
That knife is too beautiful to even think about using. You are a true craftsman.
Hey thanks Ole
Kyle
Ничего не понимаю что говорите, ну вот работа ваша, это высший пилотаж , вас смотрят не только англоязычные , сделайте чтоб было понятно и нам ,,,
Уважаю людей у которых руки растут с правильного места, с уважением из Чечни.
5 am here, Enjoying your videos in my early breaskfast...Kyle, you flow so great with your work...You have infected me with enthusiasm! I'm going to throw everything out of the breakfast room and run away to make a knife! Many Many Many Thanks!!!
Thanks Maximiliano. What a cool name.
Hey you reaching out to us is also very encouraging. I’m going to read your message to the entire team here.
Cheers
Team Royer
The details that you explain in the process is what sets you apart from a knowledge perspective even for a newbie 👍 The details on the handle is just too good with all.the extra work and precision
i just stumbled across your videos. my wife and i are blown away. i have no other words to describe it. this is phenomenal but that mosaic sword you made was built for kings.
Hey thanks rowdy and mrs rowdy. Glad you’re enjoying the vids. We have another spectacular sword build coming very soon. Be safe and be careful.
Cheers.
Dad
I agree, that handle is absolutely gorgeous!!
Thanks Kyle. Very honest craftsmanship. That small flaw in wood and its repair could've been edited but great learning moment for me. The end result is a peice of beauty that I wish I could hold in my hands and look at it to calm my mind.
Thank you so much again...
Thanks Rashid
We all make mistakes .
“The best thing an artist can do for another is to encourage them “ unknown
Happy new year Rashid
Team Royer
Your craftmanship and attention to detail is on a whole different level!!! Love your videos, I've learned alot watching them! Thanks for share your knowledge!!!
Good to have you hanging out with us all my friend
Dad
Whenever i watch a making video I think to myself "yea i can do that someday" until i watch one of yours... masterful.
Hey Doxnogle we all start at the same place. Just start. I’ve been out in the shop making knives for around 2years and a lot of Kyle’s moves are starting to sink in . Today is the best time to start!
Dad
I must appreciate celeb's efforts in the video
Royer brothers had made 2 masterpiece both knife n the video
Thank you so much! My brother Josh dose all the video work. My other brother Caleb just takes professional still pictures . :) . Josh and I are the only ones who do the RUclips thing. Oh, and my dad helps too! :)
The knife is nice looking over all. The blade is clean and not over polished. The handle is gorgeous with the buffed steel. I see a lot of master Smith’s shine every thing. It’s beautiful and all but what if you want to use it. Very well presented.
Hey Butterball, thanks for the shout out. The knife is totally ready for functional service as well !
Jeff/dad
You, sir, are an absolute perfectionist. That is an amazing finish.
I love your work! It was so incredible satisfying watching it come together, like that first sip of fresh coffee in the morning and you just go ahhhhh!!!
Absolutely Beautiful piece of work! ive never seen a bowie so elegant
I love your videos, great narrating, nice speeding up the longer parts also. So enjoyable to watch.
Thanks Don
Every time Kyle says "There is a little more sanding to do"... I think - "Hell I would of called that good a long time ago!".... That's what makes you a master sir!
Thanks JKeeton
You don't make a knife, you make a dream!!!!! Reguard from italy!!🇮🇹🇮🇹🇮🇹🇮🇹👌👌👌🔥🔥👏👏👏🔪🔪🔪🔪🔪👏👏👏🇮🇹🇮🇹🇮🇹🇮🇹🇮🇹🗡🗡🗡🗡🗡🗡🗡⚔⚔🔥🔥⚔⚔👏👏👏👏🇮🇹🇮🇹🇮🇹🇮🇹🇮🇹🇮🇹
Thanks Manu
Absolutely in love with your work ! So glad to have discovered your channel to follow up the creation of this piece of art, part after part.
Great craftsmanship, keep up with the good work, Kyle !
Captain Spoon
Thanks Captain
I dedicate myself to the forge and follow your work and it is a pleasure to see you work, keep recording your works of art that it is a pleasure to see you work, greetings from Spain
For me the best part of the video starts at 12:50 . Caleb, Chapeau. Realy clever instead of moving the camera to move the lightsource... looks awsome. Like the presentation of a new super sportscar.
Thanks spanierjuan
Josh
@@KyleRoyerKnives Sorry, Josh. Jesus, one day you have to present yourselves so that we know who is responsable for which part in you family business. I thought caleb would do the recording and editing. Sorry for that.
@@spanierjuan Haha! It's all good man! Caleb is the photo guy. I am the video guy, editor, and the guy keeping RUclips fans like yourself happy! :D
That is craftsmanship at its finest !
this is a remarkable piece, from the "museum fitting" to the different grits in the blade, I'm amazed from you work. You are a really great artist and craftsman. thanks for sharing you knowledge with us!
You are welcome Lin
Thanks for going with us on our journey
Kyle
Josh
Jeff/dad
Your videos make a little sad, only knowing that I'll never be able to afford that truly mesmerizing piece of art. I can't thank you enough for sharing!
Thanks Brandon , never say never 😎
Jeff/dad
Очень залипательный ролик. Смотрится на одном дыхании . Ни чего ни хочется пропустить. Респект мастеру.
Beautiful! What a pleasure to see this knife take shape. Really appreciate the great filming too. Can’t wait for more!
Jamie
Thanks Jamie.
Kyle
Josh
Jeff
Thank you Kyle for sharing your knowledge and techniques with us. Watching you work is mesmerizing, you're a true master!
Thank you Miguel
Kyle
unbelievable!! maybe the best craftsmanship I`ve ever seen.
I really enjoyed hearing the thought and intent that went into all the design and build of this bowie.
Hey Josh, Thanks a lot.
Jeff
Высшая лига! Привет из Белоруси!
Wow your work is number 1 great to watch a true craft man making Blades 👏 👍
Dude, how is your craftsmanship so consistently so amazing?
That is the correct question Mike !
Practice Practice Practice. Dig Dig Dig.
Keep reaching up.
Jeff/dad
@@KyleRoyerKnives thanks for the response! I hate to be a bother, but how much would you charge for a relatively simple (compared to your work) langes messer with a swept hilt/complex guard?
Oh wow I absolutely love it, the best looking wood I have ever seen.
Wow, that knife is beautiful! Thanks for posting the video!
You sir are a master..👍👍
I wish I had half of the tools you have.
I use cheap Harbor Freight tools.
My forge I found in the dump.(I guess the original owner moved on) It is made up of a 6" main pipe with a bent 3" pipe welded to it so a hair dryer will fit in the other end to force air up..On top It has a brake drum welded to the top of the six inch pipe and a old saw blade welded in the center..I take it outside and push in down into the ground.
I use charcoal.
I use cheap steel from Lowes or Home Depot for blades and guards and cabinet knobs for pommels.
Oak dowels for handle scales or what ever I find or have laying around...
Can't get much on a police disability
so I work what I can afford or find...
Keep up the good work.
I enjoy your videos.
Hey Wolf
You got it going on 👍🏻🔥☕️
Go with what you got 🔥
Try to scrounge up some old leaf or coil springs. The carbon content in the spring steel will get you a superior blade compared to mild low carbon steel
You Keep Forging On Wolf
Be safe and be careful
May God bless you .
Dad
An absolutely beautiful knife, well done once again!
Thanks Smitty
Kyle, you should do a collaboration with Alec Steele. He could bring you a lot of views to your site....and you could show him some of your skills! You are the best I've seen! Beautiful piece.
I would love to see you guys on-screen together, I watch both your channels :)
alec steele should ask for, a collaboration, imo
Kyle, you and your brother did an outstanding job on this series! I look forward to hearing more about the online course!
Lone Star Custom Grips
Thanks Lone Star
Kyle
Josh
Jeff
Needless to say, it's an absolute masterpiece! I wish you 1mln subscribers by year end, because there's simply no such knifemaker on YT willing to share their crazy skills like yours!
Thanks Kuba
Beautiful knife, thanks for all the info in the build construction.
I love Bowie knives and watching you make this, totally nailed it Kyle !
Loz Harrop Thanks
Could you add some of the different sanding papers and such to help us understand how you go about shaping the parts? You are a great instructor...a sign mastery is to be able to teach what you know to another. Thanks!
Can't wait to see more soon love your work I would love to try sometime.
I really enjoy watching you make your knives. Really works of Art that you make. I was just wondering if you had a video about yourself, like where, and how you got your training, and how you became interested in knife making. Again thank you for sharing your skills with us.
Hey thanks Neil
We have several vids about the beginning and the journey of how I got to where we are today.
Team y
Beautiful work Kyle, thank you for sharing the build with us!
You really did some fine work there. I watched each video and was more impressed at each stage of the build.
The craftsmanship was absolutely superb. Only problem is that you made it look so easy, and I know from experience that it is anything but.
Thanks James
We have a How to build a Bowie course coming out in early December. With some basic skills and tools you should be able to build a similar knife
Team Royer
This has been an excellent tutorial. Thank you so much for sharing your knowledge and experience. I have learned a lot. You demonstrated and explained everything very well. The knife turned out beautifully and that fit and finish perfect.
Thanks Joe
Team Royer
The most in depth and informative
Series of videos I have had the pleasure to watch,,many thanks
Thanks Paul
Jeff/dad
Absolutely beautiful. That was an amazing build. Really enjoyed the videos. Keep them coming. Thanks, Davin
Thank you Davin
Jeff/dad
Sublime 👏👏👏👏
From start to finish!
Great work! So detailed, so nice!
Great camera work too!
Congratulations!
you are a god of precision and aesthetics.
Thanks Nakota
Wow. Congratulations on completing this work of art. 🇹🇹🇹🇹🇹🇹
Thanks
That Works sent me here.... very glad it did!
Welcome , enjoy our adventures together
Jeff
Thank you for this Kyle. The knife looks absolutely beyond gorgeous. I really do hope of having one of your blades in my collection one day!
Jesse
Your the man kyle, your work is amazing and your videos are kick ass, you are a great RUclips teacher and one of my favorite RUclips's, keep up the AMAZING content!
Thanks
Jeff
That wood is unbelievably beautiful, indeed.
Great work as usual Kyle. Thanks for sharing the whole process with us. Video quality as usual is great also. Keep up the good work.
Very nice. Some serious skill there. I have been making knives for a while started on bushcraft knives now doing kitchen knives. Will attempt a bowie next. I have no belt grinder so a lot of filing on my bevels. Thanks for the video
Hey thanks robg if you’re interested in leveling up your skills for that Bowie we are able to help with our “How to build a Bowie “ online course at learnknifemaking.com. 👍🏻☕️🔥⚔️
Dad
This is indeed art that cuts !! This is where I’m aiming to get to with my knife making career man thanks for sharing
Hey Todd ,Thanks for your kind words .Find some local makers in your area and hang out with them. Above all enjoy the journey!
Kyle
Well I would love to hangout with local makers but as far as I know I’m the only one ina forty mile distance and we have crap laws over here but still I love it
You keep digging Todd. You’ll find some knife fellowship out there. It may not be as far away as you think.👍🏻
Jeff/dad
The most beautiful knife, that handle is spectacular!!💜
Thanks Renee
Kyle
@@KyleRoyerKnives
Your craftsmanship is absolutely stunning!! Thank you for sharing.
hi that is great,i try to make knives,nothing near yours,that is the best knife ive seen thank walter
Hey thanks walter
Cheers
Team Royer
This is the finest knife making i have ever seen 😁. Well done sir !
Thank you very much Robin
Kyle
I don’t have words to describe that knife, it’s so amazing, lovely, fantastic knive, thanks for sharing! From Brasil 🇧🇷
Thanks Adilson
God bless you and Brazil
Happy new year
Dad
What a magnificent piece! That handle is amazing!
Thanks
I have never liked dyed wood, being of the opinion that wood is among the most beautiful of materials if it is just oiled and used. That particular piece is amazing, I agree with you it does strongly remind me of Starry Night. Superb Craftsmanship on that knife.
Thanks
I collect Bowie knives and I would be so proud to own that one that is beautiful
Once upon a time a man named Kyle Royer made beautiful perfect knives which are Master Pieces.
Thanks Sayadaw
Team Royer
An absolutely masterpice !!! Phantastic job !!!
Thanks Jack
Kyle
Simplesmente uma obra de arte.
Habilidade, competência e talento natos.
Parabéns pelo trabalho!!!!!!!!
Grazie Rogerio
Cheers
Team Royer
I loved the series Kyle! Great work on the videos and the knife was stunning! Very well done as always.
Thanks deanomec
Jeff/dad
What a wonderful piece of ART that is also functional. Thanks for sharing, the information you gave will be most helpful to me as well as others. This knife is so beautiful kinda stealthily.
Thanks Kenneth
We enjoy sharing with others those things we have learned.
Kyle
Josh
Jeff/dad
Really enjoyed watching this build.
Thanks James
Merry Christmas
Team Royer
Well!! What can I say that would top what you and others have already said? Great job, can’t wait for the next new knife master piece from you!!!
Thanks Wolf
You are the best my friend in the world congratulations 👍👏
Feeling the love Papati
Glad you’re here
Dad
Bravo! Learned so much from this series, and looking forward to the full course!
Grazie Aubrey
The course is coming soon. It is still in editing. Thanks for your patience
Kyle
Josh
Jeff/dad
Don't know what to say that hasn't been already said. Its a certified beauty!
Thanks Dan the Maker Man
Kyle
WOW... What a beautyful knife. Thank you Kyle, keep up the good work :)
Wowza that turned out amazing. You're on a next level
Thanks NPC
Kyle
This knife is all kinds of beautiful. Great job Kyle... Keep up the great work. Love the videos.... Great job again.
Thanks Edub
Wow, you turned that wood into a masterpiece! Beautiful knife! :)
Thanks A to Z
Master indeed......thank you for all the videos.
You are welcome Gerhard
Thanks for hanging out with us
Kyle
Josh
Jeff/dad
Truly Beautyfull knife!
Congrats,really enjoyed seeing you make it from start to finish!
Thanks El
Glad you’re here
Team Royer
Impressive craftsmanship!
I really enjoyed this , you have a gift .
Thanks AJ
Kyle
Absolutely stunning work Kyle!
Thanks Joe
Kyle
Es un trabajo maravilloso!!! Muchas gracia por mostrar su proceso, admiro mucho su trabajo!
Very nice and such a glovely fit on that handle and fittings.
Thanks James
Kyle
Josh
Jeff/dad
Amazing! Really work of a master! You really got the best of the materials!
Thank you Ricardo
Kyle
Absolutely stunning build.
Hey thanks Ben
Kyle
Really well done Kyle!! Excellent work and great narration.
Thanks Dan
Absolutely gorgeous Bowie, Kyle! I particularly like how you accented the spine & swedge. And the color of that redwood burl is incredible. Your comparison to Van Gogh's 'Starry Night' is totally accurate. If I owned this beautiful blade, I think I would name it 'Starry Knight', or the 'Dark Knight'.
Just wow... by the way, my all time favorite painting. And knife