Appreciate the detailed tutorial, struggling to get going with my KO2 as I’m a complete novice, so videos like these with are great that step through all of the elements and workflow. 🙏
@@PoloTremolo my 1st attempt, learned to load some samples and basic functions, on to beat making 101 next! ruclips.net/video/QgUuaDilTSs/видео.htmlsi=QmR685gQMWMUqTMv
Thank a lot! Appretiate that:) No, no fader issue, I actually found out about it from other videos. Maybe it regards only some early batch of units? I got mine from distributor in Poland and it works flowlessly
Really great video, Iv had mine a couple of weeks now, never used a sampler/groovebox before so really enjoying it, a lot to learn but fun to use and get beats going 🎹
Thanks for leaving that comment - I actually took 30-40 minutes off-line to make sure the levels were right, I change the factory kick from 14 to 12 I think, swapped the hihat and added congas, also from the factory sounds:)))
Excellent! Thank you! On a totally unrelated note, i noticed a little bit of camera shake while you were using the unit. I found a cheap workaround for that by clamping the camera to something that’s not on the same surface as thing you’re working with, like a mount on the wall, or a cinder block on the floor near the desk.
Thanks!!! I tried Elgato arm, but it was even more wobbly:( I think the stand was in contact with the desk, I'll check that next time ;) Well, at least you could see I was hitting that machine hard with excitement :) ha ha
Fajna recenzja.Bardzo szczegółowa.Dzięki.A tak BTW od kiedy mam Polyend Tracker i chcę nakarmić mój GAS i rozgladam sie za nowościami to jednak jak na razie do PT nic nie ma "startu"...No moze skuszę się kiedyś na Sp 404 mk2..Ten Ep 133 to taki trochę po33 na sterydach .Fajne,kusi ,ale jak odpale PT to niczego mu nie brakuje a ma o niebo wiecej możliwości.Kupiłem w zeszlym roku za 1800 PLN.Tak że porównując cenę i możliwości....A cieszy tez i to ze PT nasz rodzimy tutejszy😂. Jeżeli nastoletni inżynierowie zrobią jakiś konkretny update softu z paroma przydatnymi funkcjami to warto sie zastanowic nad kupnem .No nie wspomnę juz o głośnym "fadergate". Trochę mnie to zraziło do tej firmy,a jestem posiadaczem Po33 i jest Ok to "KO".😀
Thanks, so I guess I answer in Polish then:) Ja również jestem posiadaczem Polyend Trackera i to fantastyczna maszyna! Z pewnością oferuje więcej kreatywnych możliwości przetwarzania próbek, slicing. Mam w planie przetestować też Trackera Mini;)
Thanks for leaving that comment! I always try to push the limits to see what’s possible with those small machines:) there are actually very decent samples onboard, so with the right selection you can achieve good results quite quickly
Nice video, thanks for the info. Do you think you need the Y cable to get stereo audio from your iPhone into the KO II? Just wondering why you cant get away with using a regular aux cable. A regular AUX cable carries a stereo signal I thought.
Anyone reviewing seriously this device should address the bugs and hardware issues. Cause it’s a big part of the experience here. Great video. And sick bass/drum beat
Ha ha:) Well, I never intented really that to be a tutorial;) Just wanted to show the workflow and possibilities. I try to please different groups of people, I think viewiers just want to see the unit in action - maybe I am wrong? But I think about it - maybe next time with other devices I'll do a separate tutorial
@@musoneo Absolutely. I needed to sit and learn a few things first. Then this really helped. I think it's a fun machine that actually kicks out some great tunes!
Thats funny, I got this thing days ago and didn't realize the quickstart sheet waas even in the box till I saw it in this vid. I was so worried about not accidentally breaking the fader and all that when I unboxed it that I didn't look at the inside of the packaging where they tucked it away.
Thanks for leaveing that comment. I find it increasingly hard to devote time to make music, but when I do, I will definately make some more content with KO II:) I just got new Polyend devices from my friends in Poland, so I guess these will be next:))) See you soon
Hi man. How many scenes can you have and how many bars on the sequencer Really 99 !? I see just for bars on the videos out there, I don’t want the loop too short …ps can you using the fx on the audio input …?
It's simple:) 99 patterns per group organized in up to 99 scenes per project (9 projects can be stored), each pattern can be up to 99 bars long, so it's pretty flexible. I think you can also change the signature for 3/4 or 5/5 but haven't yet tried that.
Super cool device but they have to get their quality control sorted. Ours arrived with the dead fader. Even before it was delivered the store was emailing us to let us know that there are problems with the initial batch. We have to send it back, which is kind of a buzzkill, and wait months for a replacement.
Q. when you change scenes as it's playing it's immediate...do.. how does it work.. does it jump to bar 1 beat 1 of the new scene or just swap in the middle of where ever you are in the previous scene.. like beat 3 for example?
Nice job. I think you were powering the K.O. with your computer and so there is a ground loop (buzzing) in the audio. If you power it from an independent USB power like a phone charger you will have no ground loop. Cheers.
I was working with studio monitors and it did not catch my attention. Yeah, you're right, this is definately something I will ckeck for next video. Usually there is no problem, but maybe with unbalanced connection I have to be extra careful. the K.O. should has 98 db signal-to-noise ratio, so it ok.
As far as I remember, all sounds in the techno track are from the factory library. I might have used some sample chords from Splice in hip-hop examples;)
Hej, udało ci się bez problemu włożyć nakładkę na Feder? ja się trochę obawiam dlatego mam wydrukowaną na trzy D; Ta co była orginalnie stawia dość spory opór…
Regarding the fader... Polish: bez problemu, zastosowałem dość duży nacisk i powoli nakładka znalazła się na swoim miejscu. English: I had no problems with attaching the cap on the fader, I put consistent force and waited patiently until it got into its place
You can record the output to the computer, but it is not really intented to be used with a computer, maybe you could sync it with DAW and record on a a separate channel;)
Thanks a lot. Actually I borrowed the unit and don’t have it anymore, but I am planning some more in the tutorials about other machines and grooveboxes;)
Very cool video but I must say you flew trough the explanation, I just got one and I’m trying to learn hot to use it and it’s not that easy, I have never done this and I’m very curious but as you explain it is at master level not for absolute novices
This is a good question:) the workflow is ultra fast, and the unit is very hands on so there is lots of fun with it. I think buying a groovebox like this maybe a good way to start actually. I don’t think you need much skills to program as simple hip-hop or techno beat. It might be easier to start with loops from Splice, but this is the more creative way to go. And you can always switch to DAW for more serious music production later.
I don't remember, but I guess there were some in the factory library, but you can always easily sample something:) I was sampling my voice using built-in mic and some other vocals from iPhone Splice app
6 note (stereo) polyphony is not great. 64mb of RAM in 2024 is weak. single FX bus is a big bummer, it's not really made to work with a DAW. it seems like a great idea machine tho, and I'm not gonna lie, I'm super tempted by the form factor. I think it is very inspiring to enjoyable music making
TE either makes the most ridiculously over priced niche things ever (op1, a desk), or a really great value of a product that combines the functionality of multiple devices in one small design for relatively cheap (like the pocket operators and the EP series).
@@popmonkeyi think its not in direct opposition with a daw Its just an other workflow, more limited but it can be a good creative tool for finding ideas realy fast
I had a few Roland gear in the past, including MC-707, and MC 101 and I find the learning curve much steeper - Roland is usually packed with features, and sometimes it requires a lot of my new diving, especially with the built-in sound modules for example MC-101 has a really powerful wavetable/Rom with hundreds of decent instruments, actually K.O. With Roland MC-101 could be a great match
Until it gets resampling and effects for each sample it’s easily beaten by a 5 buck app called Koala. They should have skipped paying the Ali family money and paid to finish the software. And 16mb of memory is hhiilllaaarioussss.
I found out that my fingers not always work with touch screen, sometimes I have to swipe five times to answer the phone;))) I prefer physical knobs and buttons, also it allows to train muscle memory - I could programm my Korg and Moog synths without looking ;) 64 MB is not that bad in my opinion - it is not a computer, more a magical calculator;))
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Appreciate the detailed tutorial, struggling to get going with my KO2 as I’m a complete novice, so videos like these with are great that step through all of the elements and workflow. 🙏
Thank you for this excellent guide. Mine arrived today and it's my 1st sampler so there's going to be a bit of s learning curve
Thanks and congratulations! It is very well laid out, very intuitive - you should be making beats in a few hours:)
@@PoloTremolo my 1st attempt, learned to load some samples and basic functions, on to beat making 101 next!
ruclips.net/video/QgUuaDilTSs/видео.htmlsi=QmR685gQMWMUqTMv
Your enthusiasm is very contagious! Thanks for this video, it helped me a lot!
The best and most understandable tutorial of all that is on RUclips for ep 133! Thanks a lot
WOW! The drums on this sound pro. Incredible live performance!
Thanks a lot!
Amazing sounds ♥♪
Thanks man!! These are mostly factory sounds except for a few chord samples I recorded from Splice using my phone😎
You literally sold me this device just with your live perfomance
Thanks man😎 I hope you have a ton of fun with it👍
Looks like no fader issues. Excellent video. One of the best walkthroughs on YT.
Thank a lot! Appretiate that:) No, no fader issue, I actually found out about it from other videos. Maybe it regards only some early batch of units? I got mine from distributor in Poland and it works flowlessly
Ktoś w Polsce ma to już na stanie?
Yes best walkthrough 🎉
Wow nice production of video for such a small number of subs
Thanks a lot! Well, I have just started a few months ago. Subs appretiated;))
Best video on the product and workflow! Super useful. Thank you!
Really great video, Iv had mine a couple of weeks now, never used a sampler/groovebox before so really enjoying it, a lot to learn but fun to use and get beats going 🎹
Yeah, this one is really very hands-on and you can swap samples and sample with no hassle:) I think this is one of the best machines to start with
Good overview, thank you!
Best video ive seen on this device. 👍
13:40 is the best groove I've seen on this device so far. This was a masterclass. Thank you!
yes he fucking killed it , that beats sounds lovely !!!
Thanks for leaving that comment - I actually took 30-40 minutes off-line to make sure the levels were right, I change the factory kick from 14 to 12 I think, swapped the hihat and added congas, also from the factory sounds:)))
I couldn't catch which app you're using for samples. What was that?@@PoloTremolo
This thing is fun
Oh yeah, fun factor is definately high with this unit:)
Great machine and great video. Thanks.
Excellent! Thank you!
On a totally unrelated note, i noticed a little bit of camera shake while you were using the unit. I found a cheap workaround for that by clamping the camera to something that’s not on the same surface as thing you’re working with, like a mount on the wall, or a cinder block on the floor near the desk.
Thanks!!! I tried Elgato arm, but it was even more wobbly:( I think the stand was in contact with the desk, I'll check that next time ;) Well, at least you could see I was hitting that machine hard with excitement :) ha ha
Bro, that was the sickest beat i heard with the PO so far. Great video, have a Subscribe and I hope you make more.
Fajna recenzja.Bardzo szczegółowa.Dzięki.A tak BTW od kiedy mam Polyend Tracker i chcę nakarmić mój GAS i rozgladam sie za nowościami to jednak jak na razie do PT nic nie ma "startu"...No moze skuszę się kiedyś na Sp 404 mk2..Ten Ep 133 to taki trochę po33 na sterydach .Fajne,kusi ,ale jak odpale PT to niczego mu nie brakuje a ma o niebo wiecej możliwości.Kupiłem w zeszlym roku za 1800 PLN.Tak że porównując cenę i możliwości....A cieszy tez i to ze PT nasz rodzimy tutejszy😂. Jeżeli nastoletni inżynierowie zrobią jakiś konkretny update softu z paroma przydatnymi funkcjami to warto sie zastanowic nad kupnem .No nie wspomnę juz o głośnym "fadergate". Trochę mnie to zraziło do tej firmy,a jestem posiadaczem Po33 i jest Ok to "KO".😀
Thanks, so I guess I answer in Polish then:)
Ja również jestem posiadaczem Polyend Trackera i to fantastyczna maszyna! Z pewnością oferuje więcej kreatywnych możliwości przetwarzania próbek, slicing. Mam w planie przetestować też Trackera Mini;)
Great walkthrough 👍🏻
Finally some decent music from this little device.
Thanks for leaving that comment! I always try to push the limits to see what’s possible with those small machines:) there are actually very decent samples onboard, so with the right selection you can achieve good results quite quickly
Nice video, thanks for the info. Do you think you need the Y cable to get stereo audio from your iPhone into the KO II? Just wondering why you cant get away with using a regular aux cable. A regular AUX cable carries a stereo signal I thought.
sorry for my late answer, I just used a standard lighting-to-minijack adapter for sampling stereo sound from iPhone Splice App
14:33 Hi! Can chords be inserted on any step of the step sequencer via external keyboard? Thanks!
Anyone reviewing seriously this device should address the bugs and hardware issues.
Cause it’s a big part of the experience here.
Great video. And sick bass/drum beat
Thanks man;) I heard the initial batch had some fader issues, but mine was working fine, so I can’t really comment on that
Click here, click here, click here, click here after 7 pots of coffee. Dude we need to play this in slow motion to keep up!
Ha ha:) Well, I never intented really that to be a tutorial;) Just wanted to show the workflow and possibilities. I try to please different groups of people, I think viewiers just want to see the unit in action - maybe I am wrong? But I think about it - maybe next time with other devices I'll do a separate tutorial
@@musoneo Absolutely. I needed to sit and learn a few things first. Then this really helped. I think it's a fun machine that actually kicks out some great tunes!
Thats funny, I got this thing days ago and didn't realize the quickstart sheet waas even in the box till I saw it in this vid. I was so worried about not accidentally breaking the fader and all that when I unboxed it that I didn't look at the inside of the packaging where they tucked it away.
Yeah, exactly, they hidden it:) cheat sheet is usuful at the beginning, but after a few hours, you won't need it:)
Thank you so much. Now I feel like I really understand my device. You are so good at explaining! Subscribed and hoping for more KOII video’s 🤞👌
Thanks for leaveing that comment. I find it increasingly hard to devote time to make music, but when I do, I will definately make some more content with KO II:) I just got new Polyend devices from my friends in Poland, so I guess these will be next:))) See you soon
Wow, mine was so stuck in the sleeve, I thought it was glued in 😅
Great walkthrough
Teenage engineering deserve the hype on ep133
Super informative video, complimented with a massively sexy groove.
Thanks a lot for that - I always try to see what is possible with those new small devices:)
Hi man. How many scenes can you have and how many bars on the sequencer Really 99 !? I see just for bars on the videos out there, I don’t want the loop too short …ps can you using the fx on the audio input …?
It's simple:) 99 patterns per group organized in up to 99 scenes per project (9 projects can be stored), each pattern can be up to 99 bars long, so it's pretty flexible. I think you can also change the signature for 3/4 or 5/5 but haven't yet tried that.
Cool. Thank you man! Can you use the Fx on the signal in input ?
@@musoneo cool Thank you. Can you use alla the Fx on your signal input ? I need a fx master bus for my tapes …
Super cool device but they have to get their quality control sorted. Ours arrived with the dead fader. Even before it was delivered the store was emailing us to let us know that there are problems with the initial batch. We have to send it back, which is kind of a buzzkill, and wait months for a replacement.
wtf how cool is this
Q. when you change scenes as it's playing it's immediate...do.. how does it work..
does it jump to bar 1 beat 1 of the new scene or just swap in the middle of where ever you are in the previous scene.. like beat 3 for example?
Great tutorial! How do you set up the amount of bars per scene (sequence)
I too use a JBL Charge as a portable setup. Decent sound, it works. :)
Exelent thx
I don't get the model of you interface ?What is it ?
Antelope Audio Discrete Pro 8 - highly recommended, best converters I ever had and super nice routing matrix plus DSP
@@PoloTremolo Thanks
can i use this device with Max/MSP?
Not sure what you mean exactly☺️ it has midi so I guess you can build some M4L devices to send MIDI to the unit but overall it’s a very simple device
How can you have/play a different instrument without interfering with the one on the previous sequence, for example a kick?
Nice job. I think you were powering the K.O. with your computer and so there is a ground loop (buzzing) in the audio. If you power it from an independent USB power like a phone charger you will have no ground loop. Cheers.
I was working with studio monitors and it did not catch my attention. Yeah, you're right, this is definately something I will ckeck for next video. Usually there is no problem, but maybe with unbalanced connection I have to be extra careful. the K.O. should has 98 db signal-to-noise ratio, so it ok.
@@PoloTremoloI Defender usb is a great usb ground loop resolver .
You're the only one who made me
want this. 👍🌟 Thanks !
Ha ha, thanks for the comment. I actually had a lot of fun with it.
Great video! Subbed!
yeah!! thanks for subscribing:)))
Does it have arp effect?
Are all the sounds build in or your own collection from another device
As far as I remember, all sounds in the techno track are from the factory library. I might have used some sample chords from Splice in hip-hop examples;)
Yo, you have 4 group of 99 pattern, so is bpm by group or it can be different in the same group ?
Like A01 can be 130 bpm and A02 can be 146 ?
great video! how much memory remains from the 64mb if you keep all the factory sounds in there?
Hej, udało ci się bez problemu włożyć nakładkę na Feder? ja się trochę obawiam dlatego mam wydrukowaną na trzy D; Ta co była orginalnie stawia dość spory opór…
Regarding the fader...
Polish: bez problemu, zastosowałem dość duży nacisk i powoli nakładka znalazła się na swoim miejscu.
English: I had no problems with attaching the cap on the fader, I put consistent force and waited patiently until it got into its place
Can you use this with a daw ?
You can record the output to the computer, but it is not really intented to be used with a computer, maybe you could sync it with DAW and record on a a separate channel;)
Great tutorial but as a total newbie I missed some details along the way. I would love a video for dummies. Thanks 🙏
Thanks a lot. Actually I borrowed the unit and don’t have it anymore, but I am planning some more in the tutorials about other machines and grooveboxes;)
Very cool video but I must say you flew trough the explanation, I just got one and I’m trying to learn hot to use it and it’s not that easy, I have never done this and I’m very curious but as you explain it is at master level not for absolute novices
would this be recommended for noobs like me?
This is a good question:) the workflow is ultra fast, and the unit is very hands on so there is lots of fun with it. I think buying a groovebox like this maybe a good way to start actually. I don’t think you need much skills to program as simple hip-hop or techno beat. It might be easier to start with loops from Splice, but this is the more creative way to go. And you can always switch to DAW for more serious music production later.
What about voice samples
I don't remember, but I guess there were some in the factory library, but you can always easily sample something:) I was sampling my voice using built-in mic and some other vocals from iPhone Splice app
Does this have a headphone jack😅
It has an aux out that works with headphones or additional speakers
Why is this device a fifth of the price of everything else they’ve ever made?
At the start, their piano cost €700. I don't think it will stay at that price.
6 note (stereo) polyphony is not great. 64mb of RAM in 2024 is weak. single FX bus is a big bummer, it's not really made to work with a DAW.
it seems like a great idea machine tho, and I'm not gonna lie, I'm super tempted by the form factor. I think it is very inspiring to enjoyable music making
TE either makes the most ridiculously over priced niche things ever (op1, a desk), or a really great value of a product that combines the functionality of multiple devices in one small design for relatively cheap (like the pocket operators and the EP series).
@@popmonkeyi think its not in direct opposition with a daw
Its just an other workflow, more limited but it can be a good creative tool for finding ideas realy fast
@@TF2_VI indeed, and I ended up getting one and it's a fantastic idea machine.
Well I find the po ko and street fighter. Hard to use. So I’ll pass and get a kebab and Roland
I had a few Roland gear in the past, including MC-707, and MC 101 and I find the learning curve much steeper - Roland is usually packed with features, and sometimes it requires a lot of my new diving, especially with the built-in sound modules for example MC-101 has a really powerful wavetable/Rom with hundreds of decent instruments, actually K.O. With Roland MC-101 could be a great match
Water and wastewater treatment as well
Until it gets resampling and effects for each sample it’s easily beaten by a 5 buck app called Koala.
They should have skipped paying the Ali family money and paid to finish the software.
And 16mb of memory is hhiilllaaarioussss.
Do you make music ?
If yes how much music did you finish like this year approximately ?
I found out that my fingers not always work with touch screen, sometimes I have to swipe five times to answer the phone;))) I prefer physical knobs and buttons, also it allows to train muscle memory - I could programm my Korg and Moog synths without looking ;) 64 MB is not that bad in my opinion - it is not a computer, more a magical calculator;))
Finally got some real info onFX