IJustDraw While both Gundams start out similarly, the RX-78-02 proves superior due to less friction from magnetic coating and more thrusters added for space combat in the end. It does start with no core fighter at all, though. Gatling guns are permanently built in as well.
@@Grunt0066 it's a shame, because I much prefer the 2.0. it looks more anime accurate, so you lose surface detail but it has what I think is better, and it's compatible with the G-bull, so you get to make all the silly combinations from the TV series
Honestly I don't care much about anime accuracy due to the very limited details imposed by the animation, that's why I much prefer the various re-designs explicitly made for model kits.
I honestly never tire of building RX 78-2 kits. I have the old HG, the SDCS, the OYW MG, the RG, and I have two of these Origins kits, and I agree that the Origins is awesome but the OYW MG is very underrated and totally holds up too
@@MechaGaikotsu it is an old kit, so there were plenty of bad nubs in the frame. it also has a ridiculous amount of panel lines but that's why i like it because it is very fun to detail up
" There is no core fighter block" Good. The core fighter block ruined the 3.0 for me with how wiggly it was. Not to mention the way the shoulders were attached were also awful because they slipped off the arm polycaps all the time.
@@fragtagninja1633 The core fighter itself is fine, minus the nub on the body which, with the panel lines on the 3.0 that were made by a dying old man with altimeters, warp the plastic when you try to sand it no matter what. What I have a problem with is the way the chest connects to the waist because of it. It's loose as all hell.
I got the Origin full release version for Christmas a few years ago and I can definitely advocate for his opinion that it’s the best. It holds up really well and it’s super fun to play around with different poses.
Beats me, though, as to why we still don’t have a HG of this version of the Granddaddy (whereas we already have different versions like the Local Type, FSD, Heavy Gundam, etc.); while we still don’t have any MG’s of the GTO Zakus.
I bought this kit along with the GM Sniper II from a friend for $40 for both kits. This was the only one that didn't break because I was still an inexperienced builder that didn't have nippers to cut the pieces out. Fun kit, but would definitely like to get another one that hopefully I could build better.
I just got one for Christmas and I've got to say, its almost flawless! Only problem for me is the fingers constantly popping off and not being able to hold stuff without extra support, but other than that, It's amazing!
In case you're window shopping for which MG to get, the 2.0 is the most anime accurate, also comes with a bunch of stuff and the articulation doesn't suffer from its age, it's a great kit. One thing to note is that it doesn't have a core block, but also it doesn't need one, you can assemble it without the core fighter inside.
I'd honestly say pick up a 2.0. The weapons and core fighter from the 3.0 are the same, but the 2.0 has a completely different aesthetic (kind of like the 3.0 prime) but is still super posable and has more accessories than the 3.0.
I want to have the Origin granddaddy for its playability but the 3.0 is just so marvellous to look at. I sometimes wonder that my hands built that thing.
@@lunaticweeb250 Don't know how it's missing. They give you a tracking number and all, unless you paid for the cheapest shipping option ¯\_(ツ)_/¯. For the record, most of my orders from HLJ take between 2 and 3 months to arrive. Also, are you sure they actually shipped it or was it in your private warehouse?
He actually did a Buyee tutorial a while back in his Gundarium Tier Giveaway video. It's what I used to learn it. Just be careful as there are a lot of hidden fees they'll ding you on. Pretty good service though. Here's his Triple Gundarium Giveaway video where he shows how to use Buyee: ruclips.net/video/34p0rvVAgrE/видео.html
If you're having trouble with bandai led there's to way to correct that, either tighten the screw or put them in the fridge a few minutes (I'm not kidding the cold help the courant pass trought easier) but don't do both, the plastic of the led will crack open
Mine is still alive and in relatively one piece. But it’s definitely seen better days. I certainly won’t be treating my future Gunpla kits with the same lack of long term care and love.
If ever I have a still to build pile it's either gonna be right after Christmas or my birthday. That or I've one the lottery and spend most of it on gunpla.
You should really consider putting the water slides on this kit. At least the badges and numbering. it looks AMAZING and is the only MG that I keep on constant display. I love this kit so much its the background image on my cellphone!
built this over a month ago and gotta say really love it i aint a fan of the core fighter so i got this over the 3.0 looks nice on my nightstand only minor issue was the sandwich head seemed like the left side wasent going in fully with a large seam line i got it fixed sorta as of now but no big deal V fin really loose but i can manage with it overall this version rocks eventually ill tackle the 3.0
You SPIN the shield on the ball joint, you don't flip the arm connector it's self upside down, also both beam rifles are meant to be stored on the shield at the same time.
OYW proportion and sculpt is still my favorite of all time for the RX-78 and second is the 2.0. haven't even bought the 3.0 yet. i also still have the 1.0 bought from day one when Bandai announced the MG line with some painted details and modification.
I wish the Zaku origin came in MG scale or there was an HG scale version of this.... I ended up super heavily modifying my mg zaku 2.0 to look like an origin version with mixed but passable results
Bought this kit. Painted it. Sold it. Bought it again. Straight built. Broke some parts. Sold it for scraps. Bought another one. This gunpla may not be perfect. But i enjoyed playing with it the most.
The 2.0 is no slouch at all. It's the very model that set the standard for much of the mg line after it just like the zaku 2.0. Also try a different battery. I heard people swapping out the reccomended batteries for something stronger.
You can also get a version for like $5 or $10 more and get a yellow V Fin, 2 LEDS, a yellow and a purple LED, plus some other stuff. Which I the version I got.
I see you updated the title to reflect the correct name? I commented earlier about that. Before, the title was, "Gundarium Tier Grandaddy! - MG RX-78-2 Gundam The Origin Review" When the _Origins_ version of this mobile suit is actually MG RX-78-02 Gundam; with a 0 before the 2. MG RX-78-02 Gundam The Origin [Solid Clear/Standard] is one of many _Ichiban Kuji_ lottery prize versions. There's a bunch of them including: ⭐Master Grade⭐ -- 2018 August -- RX-78-2 Gundam Ver.3.0 [Solid Clear/Standard] RX-78-2 Gundam Ver.3.0 [Solid Clear/Reverse] RX-78-2 Gundam Ver.3.0 [Solid Clear/Reverse Last One] FF-X7 Core Fighter [Clear] FF-X7 Core Fighter [Color Clear] FF-X7 Core Fighter [G-3 Color] FF-X7 Core Fighter [Prototype Color] FF-X7 Core Fighter [Full Armor Color] -- 2019 September -- RX-78-02 Gundam The Origin [Solid Clear/Standard] RX-78-02 Gundam The Origin [Solid Clear/Reverse] MS-06S Zaku II (Char Aznable Custom) Ver.2.0 [Solid Clear/Standard] RX-78-2 Gundam Head RX-178 Gundam Mk-II Head MSZ-006 Z Gundam Head MSZ-010 ΖΖ Gundam Head RX-93 ν Gundam Head 9:22 Why aren't these a thing? Well they now have the _Figure Rise Effect_ line up of products. So there's that. Anyway, I'm wondering if Bandai will make an RG RX-78-02 Gundam. Perhaps they will. Also, I'm surprised they haven't made any more MGs from Mobile Suit Gundam: The Origin. Some good ones I think would be: - MG RX-78-01 Prototype Gundam - MG MS-05 Zaku I/Origin - MG MS-05S Char's Zaku I - MG MS-06S Char's Zaku II
IMO the 2.0s the best one. It has all the accessories you could want, it's compatible with the MG G-Fighter, it's got a great inner frame, and it feels much better to pose than the 3.0 or Origin. If you want to talk about it like it's just a toy that is.
Hello Mecha Gaikotsu! Would u mind reviewing those HGBD:R,especially that cool looking Justice Knight? Hopefully soon! Really want to see your opinion:)
I honestly don't care for the clear/titanium/gold plated ones, though I know they make it more 'exclusive' I suppose. I'd really only want a gold-plated perfect grade RX-78-2 just because of rarity and awesomeness as a showcase centerpiece, but I'd have to sell an internal organ for one so not going to happen. lol One day I'll probably just pull my PG apart and paint it completely. One day.
While I still prefer the 3.0 looks wise for that RG look, gotta say, it's pretty wobbly. The looks of the Origin version are slowly growing on me, too, plus that awesome shoulder cannon.
The hands on the RX-78 have always looked oversized, even in later animated and/or drawn appearances like the promotional image for GundamxHelloKitty. That's why they use the Nu Gundam Ver.Ka on the MG RX-78 from the 3.0 onwards. In fact, oversized hands are a common theme with One Year War suits, especially Zakus and Doms.
I'm the type that actually doesn't like the OG gundam colors (since I've seen it so much). I would definitely repaint this in either FSD, local type, or G3 colors.
Can you also build the Ichiban kuji set B. So you can swap clear parts and non clear parts from set A. To build a Origin RX 78 in white and other in clear.
Bandai could make the early variations in mg as the frame is there but they seem to focus on hg sales. Even char origin zaku in mg with his big gun would had been a great kit.
I know it's an old kit but will you ever do a review on the HG RX 78-2 Revive? Or maybe just do a comparison of all of the granddaddy model kits out there?
IMHO the 2.0 is miles better than the 3.0. my 3.0 went floppy so fast, while the 2.0 is solid as a rock. As for anime looks, the 2.0 is the best kinda like the Zaku II 2.0. Accessories wise, the 2.0 has everything, from the hammer, javalin, and the naplam launcher.
I am having a massive problem with these fingers. I cannot get the to bend at the bottom knuckle at all, and holding a weapon is ugly. Does anyone else have the same issues?
Am I crazy? This model was never shown in the anime adaptation right? I just watched the whole damn thing, wanting to see this guy in action, even for a split second. Is it only in the comic?
![Ranking every single retail RG Gunpla - RG 01-41 tier list - [4K]](/img/1.gif)
It's stupid Bandai didn't make the Zaku Origin in an MG. That's what the entire anime was focused on.
Yes it is stupid
Fun Fact: Unlike the original RX-78-2, this version of the Gundam (RX-78-02) was able to completely *decapitate* Char’s Zaku II in a mountain fight.
what's the difference of this RX 78-2 vs the OG? As far as I know, this is the same gundam just with minor mods. Design-wise and story-wise.
The original gundam in the show was the RX-78-2 tho so not exactly sure what you're talking about
IJustDraw While both Gundams start out similarly, the RX-78-02 proves superior due to less friction from magnetic coating and more thrusters added for space combat in the end. It does start with no core fighter at all, though. Gatling guns are permanently built in as well.
@@mitchelin02 Go look it up the Gundam in the show is the RX78-2
The Rx-78-2 from the Origin is different from the show’s RX-78-2
"They usually narrow it down to these two kits"
2.0 Gundam: Am I a joke to you?
*YES*
@@Grunt0066 it's a shame, because I much prefer the 2.0. it looks more anime accurate, so you lose surface detail but it has what I think is better, and it's compatible with the G-bull, so you get to make all the silly combinations from the TV series
Yes it's an underrated kit, I've been trying to find this kit in Indonesia but it's so hard to find
@@zettonhz multi toys store have it, bro
@@mkevindhizky ah i see you're a indonesian too
2.0 is awesome if you really want that perfect representation of an anime version of the granddaddy.
Honestly I don't care much about anime accuracy due to the very limited details imposed by the animation, that's why I much prefer the various re-designs explicitly made for model kits.
@shadowshinobi06 OK
2.0 was ok for the 80s anime.. this matches to current anime well..so both are represented.😉
If you want that, get the PG I guess
@shadowshinobi06 ok never mind
I honestly never tire of building RX 78-2 kits. I have the old HG, the SDCS, the OYW MG, the RG, and I have two of these Origins kits, and I agree that the Origins is awesome but the OYW MG is very underrated and totally holds up too
I’ve heard that the OYW one is pretty good. Really need to check that one out
@@MechaGaikotsu it is an old kit, so there were plenty of bad nubs in the frame. it also has a ridiculous amount of panel lines but that's why i like it because it is very fun to detail up
Can’t wait for my rg 2.0
" There is no core fighter block"
Good. The core fighter block ruined the 3.0 for me with how wiggly it was. Not to mention the way the shoulders were attached were also awful because they slipped off the arm polycaps all the time.
I hate building core fighters!
@@fragtagninja1633 The core fighter itself is fine, minus the nub on the body which, with the panel lines on the 3.0 that were made by a dying old man with altimeters, warp the plastic when you try to sand it no matter what. What I have a problem with is the way the chest connects to the waist because of it. It's loose as all hell.
@@HyperfixationWizard do you get a block in place of the core fighter on the 3.0 MG?
that is a flaw I agree with
Did the 2.0 has the same problem?
I never regret getting the Origin as my first RX78-2. I love the blueprint included on the special ver kit.
RX-78 The Origin is easily my favorite that i have ever built. It is simple, but oh so beautiful, and wonderfully articulated.
I got the Origin full release version for Christmas a few years ago and I can definitely advocate for his opinion that it’s the best. It holds up really well and it’s super fun to play around with different poses.
I actually like the no core block it allows the gundam to have way more articulation I own a origin myself and I say it is awesome as well
Beats me, though, as to why we still don’t have a HG of this version of the Granddaddy (whereas we already have different versions like the Local Type, FSD, Heavy Gundam, etc.); while we still don’t have any MG’s of the GTO Zakus.
We need our MG ZAKU 3.0
They're gonna animate the White Base arc of Origin first
sp4rrow do we even know that’s going to happen? Has it been confirmed?
dhathor
*”where’s our high grade grandad?” intensifies*
Its coming!
got lucky in 7-11 last week and got this A kit :D can’t wait to build and display it beside my OG The Origin gramps :)
I bought this kit along with the GM Sniper II from a friend for $40 for both kits. This was the only one that didn't break because I was still an inexperienced builder that didn't have nippers to cut the pieces out. Fun kit, but would definitely like to get another one that hopefully I could build better.
The Origin RX-78-2 will be my first Mg kit ever. I’m excited to build it.
I actually went for the ver 2.0 cuz more weapon choices. Like the beam javelin and the hyper bazooka
And now this design is officially the main modern design for the RX-78-2, and will be the centrepiece in the upcoming film Cucuruz Doan's Island.
I just got one for Christmas and I've got to say, its almost flawless! Only problem for me is the fingers constantly popping off and not being able to hold stuff without extra support, but other than that, It's amazing!
In case you're window shopping for which MG to get, the 2.0 is the most anime accurate, also comes with a bunch of stuff and the articulation doesn't suffer from its age, it's a great kit.
One thing to note is that it doesn't have a core block, but also it doesn't need one, you can assemble it without the core fighter inside.
I'd honestly say pick up a 2.0. The weapons and core fighter from the 3.0 are the same, but the 2.0 has a completely different aesthetic (kind of like the 3.0 prime) but is still super posable and has more accessories than the 3.0.
big turn off for me is the disproportionately large hands
I want to have the Origin granddaddy for its playability but the 3.0 is just so marvellous to look at. I sometimes wonder that my hands built that thing.
I still have no idea how Buyee works and it sucks cuz there's a Legilis I'm eyeing.
Dude, he keeps talkong about hobby link japan with no explanation and now the Rg Crossbone gundam i bought in june still hasnt come
@@lunaticweeb250 Eh, hobbylink japan is pretty easy.
@@totallynotmarlon my missing rg crossbones begs to differ
@@lunaticweeb250 Don't know how it's missing. They give you a tracking number and all, unless you paid for the cheapest shipping option ¯\_(ツ)_/¯.
For the record, most of my orders from HLJ take between 2 and 3 months to arrive.
Also, are you sure they actually shipped it or was it in your private warehouse?
He actually did a Buyee tutorial a while back in his Gundarium Tier Giveaway video. It's what I used to learn it. Just be careful as there are a lot of hidden fees they'll ding you on. Pretty good service though.
Here's his Triple Gundarium Giveaway video where he shows how to use Buyee:
ruclips.net/video/34p0rvVAgrE/видео.html
I painted my kit in the G3 colors and I love it. The only problem is the hands and wrist which refuses to keep the new beam rifle pointed out.
LOVING all the reviews of older kits!!!
Of course it's good, that's why I have 3.
Oh wait no. I just have 1. Nevermind.
If you're having trouble with bandai led there's to way to correct that, either tighten the screw or put them in the fridge a few minutes (I'm not kidding the cold help the courant pass trought easier) but don't do both, the plastic of the led will crack open
Mine is still alive and in relatively one piece. But it’s definitely seen better days. I certainly won’t be treating my future Gunpla kits with the same lack of long term care and love.
I have this kit in my"still to build" pile.... thanks for the great review building this once I e completed my MG Hazel with all the added-ons...
If ever I have a still to build pile it's either gonna be right after Christmas or my birthday. That or I've one the lottery and spend most of it on gunpla.
I just bought mine from Hobby Lobby at 75% off for $13.13 USD. I'm excited to start the build.
You should really consider putting the water slides on this kit. At least the badges and numbering. it looks AMAZING and is the only MG that I keep on constant display. I love this kit so much its the background image on my cellphone!
About time, old timer!
The Origin was my first MG Gundam, and the one I always show off to people.
built this over a month ago and gotta say really love it i aint a fan of the core fighter so i got this over the 3.0 looks nice on my nightstand only minor issue was the sandwich head seemed like the left side wasent going in fully with a large seam line i got it fixed sorta as of now but no big deal V fin really loose but i can manage with it overall this version rocks eventually ill tackle the 3.0
You SPIN the shield on the ball joint, you don't flip the arm connector it's self upside down, also both beam rifles are meant to be stored on the shield at the same time.
OYW proportion and sculpt is still my favorite of all time for the RX-78 and second is the 2.0. haven't even bought the 3.0 yet. i also still have the 1.0 bought from day one when Bandai announced the MG line with some painted details and modification.
I wish the Zaku origin came in MG scale or there was an HG scale version of this.... I ended up super heavily modifying my mg zaku 2.0 to look like an origin version with mixed but passable results
Bought this kit. Painted it. Sold it. Bought it again. Straight built. Broke some parts. Sold it for scraps. Bought another one. This gunpla may not be perfect. But i enjoyed playing with it the most.
The 2.0 is no slouch at all. It's the very model that set the standard for much of the mg line after it just like the zaku 2.0. Also try a different battery. I heard people swapping out the reccomended batteries for something stronger.
21:05 caught me off guard. Fancy ichiban kuji is fancy!
I just got this thing today, can't wait to build it over the weekend
They released a 1/100 Cars Zaku 2 Origin ver. Fix figuration Metal composite not to long ago to go with the MG and FFMC Origin Gundam Figure.
Me seeing this kit: It's been a long time old one 😊 *happyness noise*
3:48 you missed one, the one year Game var.
Casval one? It's merely a recolor of the 3.0 unless u talking about the 1.0 one
You can also get a version for like $5 or $10 more and get a yellow V Fin, 2 LEDS, a yellow and a purple LED, plus some other stuff. Which I the version I got.
I see you updated the title to reflect the correct name?
I commented earlier about that.
Before, the title was, "Gundarium Tier Grandaddy! - MG RX-78-2 Gundam The Origin Review"
When the _Origins_ version of this mobile suit is actually MG RX-78-02 Gundam; with a 0 before the 2.
MG RX-78-02 Gundam The Origin [Solid Clear/Standard] is one of many _Ichiban Kuji_ lottery prize versions.
There's a bunch of them including:
⭐Master Grade⭐
-- 2018 August --
RX-78-2 Gundam Ver.3.0 [Solid Clear/Standard]
RX-78-2 Gundam Ver.3.0 [Solid Clear/Reverse]
RX-78-2 Gundam Ver.3.0 [Solid Clear/Reverse Last One]
FF-X7 Core Fighter [Clear]
FF-X7 Core Fighter [Color Clear]
FF-X7 Core Fighter [G-3 Color]
FF-X7 Core Fighter [Prototype Color]
FF-X7 Core Fighter [Full Armor Color]
-- 2019 September --
RX-78-02 Gundam The Origin [Solid Clear/Standard]
RX-78-02 Gundam The Origin [Solid Clear/Reverse]
MS-06S Zaku II (Char Aznable Custom) Ver.2.0 [Solid Clear/Standard]
RX-78-2 Gundam Head
RX-178 Gundam Mk-II Head
MSZ-006 Z Gundam Head
MSZ-010 ΖΖ Gundam Head
RX-93 ν Gundam Head
9:22
Why aren't these a thing?
Well they now have the _Figure Rise Effect_ line up of products.
So there's that.
Anyway, I'm wondering if Bandai will make an RG RX-78-02 Gundam.
Perhaps they will.
Also, I'm surprised they haven't made any more MGs from Mobile Suit Gundam: The Origin.
Some good ones I think would be:
- MG RX-78-01 Prototype Gundam
- MG MS-05 Zaku I/Origin
- MG MS-05S Char's Zaku I
- MG MS-06S Char's Zaku II
@xxnike629xx i.imgur.com/ry1udpL.png
happy halloween Mecha Gaikotsu!!!!
Tempted to buy both ichiban kuji for one in total clear and one in those brilliant, vivid colors
u can rotate the box between the two circle behind your backpack so it can be a shield storage.
IMO the 2.0s the best one. It has all the accessories you could want, it's compatible with the MG G-Fighter, it's got a great inner frame, and it feels much better to pose than the 3.0 or Origin. If you want to talk about it like it's just a toy that is.
Those Standard and Reverse Clear kits are so eye-popping!
The "Chonk" rifle looks like it's based off the guncannon's beam rifle
You’re right! They’re super similar!
It is
The origin version is my third master grade and I love it and it looks great with led
Man, I love your voice! So crisp and energetic!
mg acguy come with efect parts.
and mg acguy is an absolut awesome kit.
Hello Mecha Gaikotsu! Would u mind reviewing those HGBD:R,especially that cool looking Justice Knight?
Hopefully soon!
Really want to see your opinion:)
I most certainly will! Hopefully the first re:rise review will be up by the weekend!
The shield can be stored on the backpack, I think you missed that
I think he said that, although he did not attach it.
julian laganzo nah, I think he totally forgot that
I just got this as my first build and i am so looking forward to it
... you poor soul.
The Origin ver is easily one of the best MG kits I've built along with the Dynames and GM Sniper II. The Dynames is the closest to this kit.
The MG Acguy is still the best MG kit for me
Freedom 2.0: Am I a joke to you?
@@travisalpasa depends on your definition of a joke
I honestly don't care for the clear/titanium/gold plated ones, though I know they make it more 'exclusive' I suppose. I'd really only want a gold-plated perfect grade RX-78-2 just because of rarity and awesomeness as a showcase centerpiece, but I'd have to sell an internal organ for one so not going to happen. lol
One day I'll probably just pull my PG apart and paint it completely. One day.
I used to lean towards the 3.0 but the origin has been growing on me lately.. I think I'm gonna pick up the origin and won't look back 😂
14:29 dude, be careful that handle
You will definitely find more funny faces on RG sinanju.
While I still prefer the 3.0 looks wise for that RG look, gotta say, it's pretty wobbly. The looks of the Origin version are slowly growing on me, too, plus that awesome shoulder cannon.
The hands on the RX-78 have always looked oversized, even in later animated and/or drawn appearances like the promotional image for GundamxHelloKitty. That's why they use the Nu Gundam Ver.Ka on the MG RX-78 from the 3.0 onwards. In fact, oversized hands are a common theme with One Year War suits, especially Zakus and Doms.
I'm the type that actually doesn't like the OG gundam colors (since I've seen it so much). I would definitely repaint this in either FSD, local type, or G3 colors.
Now you just need the inverted clear version, and then swap parts.
For MAXIMUM CRYSTAL POWAH!!!
I might buy both of the lottery ones, and build 1 with all the clear pieces. And then 1 with the solid parts.
So... the MG 3.0 is just an up-scaled RG?
Definitely
I like to see you do one on the MG 1/100 Gundam from the one year war version.
i love the rx 78 02 design but not the childish red blue and yellow colors.. it makes it look more like a toy than a menacing giant mech..
gundam is known for that color combination tho....
Can you also build the Ichiban kuji set B. So you can swap clear parts and non clear parts from set A. To build a Origin RX 78 in white and other in clear.
confused :( whos the king of master grade RX-78 Gundam? origin = old school approach, 3.0 = modern approach. 3:26. more like a multiverse versions....
Absolutely great 👍video review. Hunting the origin at this very moment.
Bandai could make the early variations in mg as the frame is there but they seem to focus on hg sales. Even char origin zaku in mg with his big gun would had been a great kit.
Originally I was gonna get the special package version but then the lottery version came out. When it did I was like...I NEEEEEED IIIIITTT
I know it's an old kit but will you ever do a review on the HG RX 78-2 Revive? Or maybe just do a comparison of all of the granddaddy model kits out there?
I think the beefy gun sticks out a little more on the storage sontheres space to put both guns on the shield at the same time
IMHO the 2.0 is miles better than the 3.0. my 3.0 went floppy so fast, while the 2.0 is solid as a rock. As for anime looks, the 2.0 is the best kinda like the Zaku II 2.0.
Accessories wise, the 2.0 has everything, from the hammer, javalin, and the naplam launcher.
If you want a fairly decent modern design can also go for OYW ver. One of best looking RX-78-2.
I really gotta build a Grand Daddy.
Highly suggest the origin version over the 3.0. the 3.0 looks good with all the color separation but i hate the tiny parts which tends to fall off.
@@Edwardin1989 Noted
Btw MechaGaikotsu, will you review the GFFMC 40th Anniversary RX-78-2 Gundam or 40th Anniversary Zaku 02 Char?
Honestly I would try to buy both special versions and just change the torso with the other torso to make them completely clear and special
Hmmm so you need the set A and the Last 1 to complete the "all clear ver" and "HD ver".
I am having a massive problem with these fingers. I cannot get the to bend at the bottom knuckle at all, and holding a weapon is ugly. Does anyone else have the same issues?
All the time. They’re more likely to pop off then bend at the bottom. I hate them personally 😟
The 2.0 is a gundam that NEED to get
They beefy one looks more like a prototype. I prefer that because it is from “The Origin”
It IS the early type
I want to see someone combine both clear versions!
You should do a review of the f90 master grade! The kit looks and is totally awesome. One of the best master grades of this year (minus Dynames)
Yes finally, waited for this since last year.
I wish this kit can be repainted into black variant as RX-78-01 Gundam Prototype.
Which you recommend to beginners the 3.0 or origin??
Origin. The 3.0 is not a beginner friendly kit.
@@muisverriet thanks
You definitely have to review the 2.0 now!!
for the people i need to know mg duel assault shroud or mg rx 78 origin
Origin
That's one stunning box art!
Am I crazy? This model was never shown in the anime adaptation right? I just watched the whole damn thing, wanting to see this guy in action, even for a split second. Is it only in the comic?
manga*
Have you reviewed the MG MS-06R-1A Zaku II Black Trinity Ver. 2.0 yet?
How nice would the solid clear / solid clear look?
In fact I'm going to get both so I can do that.
I have this model but I didn’t know where you get that light. Where do you buy the slight???
Honestly, the only thing that annoys me is the Knee Armor...
Yeah, that looks absolutely awful.
glad i'm not the only one
I really wish you review the 1/100 scale MG perfect zeong :0, and the 1/100 scale MG og gundam with its 1/100 scale G - fighter..
Just finished this kit, my only issue is the hands. The fingers are so easy to pop out.
Bandai can make crazily engineered tiny robot kits but can’t make a simple LED unit