How to make a useful tool for securely tightening cables with your own hands.
HTML-код
- Опубликовано: 3 мар 2024
- How to make a useful tool for securely tightening cables with your own hands. DIY equipment. Craftsmans Tips and tricks.
#shorts #diy #tips #tools #tools #cable #tricks #howto #diyequipment #homemade 
Хобби
![Kehlani - After Hours [Official Music Video]](http://i.ytimg.com/vi/6qatTTscK4c/mqdefault.jpg)
![Старейшая нерешённая задача [Veritasium]](/img/1.gif)
Did anyone else die inside when he spun the tapping tool at 1000 RPM with a power tool 😢
Nope, I was already dead when it happened.
I died when I saw the tap
Yes!!!!
Thats an uncoated machine tap. If its somewhere between M8-M10 hole size then you can go from around 320-800RPM for HSS machine taps. About twice that for coated ones and if you are rich enough for a carbide one you can go as fast as the drill lets you go. There are also faster "standard" taps but rare
No don’t think you died either otherwise you wouldn’t have been able to send your comment
Pull it tight counterclockwise. That way the tension will force the bolt to tighten instead of loosen.
That was the only thing I got out of this video 😂
i was gonna say it needs a washer or itwill undo itself. but this is clever.
Ya, that thin cheap wire will loosen it. 😂
@@freeaudiobooks7469 it 100% will. Have you never used a hot wire fence before?
@@freeaudiobooks7469it can and it will
Проволоку надо было наматывать в обратную сторону, чтобы она затягивала гайку
Истину глаголете!
Does putin knows that?
Да ну, перестань. Не раскрутится же она!
(Сарказм)
@@HermanWillems Путин начальник ГУЛАГа, конечно знает. Приезжай в гости, аппаратаменты выделим.
Для этого надо мощнее резьбу в профиле сделать
High quality steel might be expensive but with the right know-how and tools it's a worthwhile investment.
Why did you make the easy thing difficult?
How is it done then?
Eye hook with washer and bolt on other side.
А он армянский комсомолец.
For people to comment
First of all, that is a wire, not a cable. First clue that they have no idea what they are doing.
Second, dangerous way to ruin a tap.
What makes the ratcheting noise while they are tightening it in the wrong direction so that the tension on the wire will loosen it?
Очень люблю такие видео, как сделать полезную и что немаловажно-дешовую приспособу. Вам для этого понадобится шпилька с резьбой, проволока, лобзик, УШМ, минитрактор, цементовоз, кузница и ещё пару мелочей!😂
Так тут по факту ничего не надо. А если у тебя нет элементарно сверла и дрели то самоделки это не твоё. Другой вопрос что надёжность данной резьбы оставляет желать лучшего
Там и к сверлу вопросу. Дешманское не переживет массовой работы на всем ограждении. А хорошее стоит, как чугунный мост. Ну и просто нормальными саерлами приятнее сверлить.
При нагрузке на этот натянутый трос , шпильку загнёт нахрен через пару дней статической нагрузки.
Особо понравилось нарезание резьбы шуриком.
А нахуя это надо?
Никогда не начинаю сверление ступенчатым сверлом: если что-то случится с кончиком, то, либо сверло на выброс, либо, если умеешь, перетачивать под сверление до следующего диаметра
You realize a tap is hardened steel and could break using it that way and if not wearing eye protection watch out! Be safe!
perhaps a crap quality tap. But a dormer machine tap will do that easily on mild steel thickness of 3 mm.. considering the pitch thread is around 1.5 and 1.75 if its m12 size. not much to hold....
👏 safety first
Wind the cable the opposite way so it pulls the bolt tighter
holy crap I was yelling at my screen over this... this whole thing make me sad inside hahaha
@@dagansmith5354 Great minds think alike 💪
Incredible observation. Kudos.
Yes! Thx - I was breaking my brain for a minute there...
_("Something.. Is... wrong... here...... Damn you, brain!")_
Second thing is that the inside of that slot won't be galvanized. Unless it's a stainless bolt, it'll rust through in no time at all.
Using the nut to lock the threads does not help the fact that this tiny and unbalanced threat is going rip out far faster than a peg that goes through both sides of the post. This design is a weak joint prone to failure under force here.
Straight flute tap in a drill.....dont bother asking to borrow any of mine....
Bingo. I recoiled watching that.
оаровецплацкцыав
It worked as intended and there were no problems. Why are you complaining?
@@DoubleBobbecause that isn’t how you use an expensive ass flute tap. Believe it or not there are right and wrong ways to do things…
@@mikeharris6335 What went wrong there? What happened?
"The kids love walking into the into the wire in the middle of the yard for no reason"
Проще просверлить насквозь и поставить 2 гайки и не морочить руки нарезкой резьбы в тонкой стенке
Стенки стянет
@@user-vp1fh4ej9l
В кода трос потянет, то стенки растянет
Das ist so richtg , überleg doch mahl , wie willst du eine zweite Mutter den anbringen bei eim einen solchen Proviel du Schlaumeier !!😅
Эгершельд шляпа
может быть, трудно заложить гайку в забор?
The threads will pull out when you tighten the nut. The allthread is already sagging.
In any case, you drilled the hole to big, the tap barely did anything, hence, little to no metal bur in the tap. Great method though, wrong drill bit.
was looking for this comment!
awaiting seeing this on a different channel with a real engineer! lol
Lmao ok
Well, he just proved you wrong slick…
Opinions vary
he tried, It wont last but he at least did way better than most He wuld have done better if her went all the way thru.
You just taught me so much in 30 seconds
🤗👋🤝
If only there were already an easy to find and affordable product that did this same job, didn't require any power tools, a step bit, a tap, and a grinder.
IF ONLY.
The length of threased rod where the wire is attached makes the lever action at the bolt threads increase dramatically. It will pull out on its own when the wire gets cold and shortens.
On top of such bolt size (Threads) in that thin of steel...
Dude it's meant to be an awful idea on purpose. so people like you comment on the video because more interaction leads to the algorithm feeding the video to more people. It doesn't matter if it's negative interaction it still works the same. 😂
🎉1000T❤😂😂😂🎉
exactly!
@@StoneyBaloney69 Good point.
If you turn the stool upside down, you can fit 4 life hackers on it
Of course, i just need to buy all these tools...!!!😂😂😂
An over sized hole with loose threads what could possibly go wrong?….
shear force other than pulling, should be fine.
And a wire under tension lol
@@brnzhut shear force isn't the problem here.
Hmmm, no cutting oil, huh??
@@holywells he put some on the outside of the hole but not really in it well. I didn't see him put any on the tap. Thank God he's not tapping steel.
Здрасьте, я у мамы инженер.😂😂😂
😂😂🤗😉
Thanks for the zip tie tip!
Not familiar with these bits for wood, but will be using them in project soon. This helps!
Thanks for sharing.
👋🤝❤️
they're not for wood
it's not 6 this is a foolish video
Not wood and a regular Joe wouldn't know a tap from a die.
I guess I need to clarify. I don't need these bits for wood. I have a metal project coming up and I'm only familiar with wood bits as that's the medium I usually work with.
And using the zip tie as a depth stop for me works well - can't read the size when it's spinning. The zip tie It's better than tape for this.
The wire tightening "tip" is crap
толщина стенки сколько 1,5-2мм? Проще засверлить и приварить гайку, надежней будет😉.
И резьба х1.5 или х1.75 . Смех и только .
Комментарий здравого человека !!!👆🏻👍🏻✌🏻
Он бы еще в листе бумаги нарезал резьбу 😂
Для легкой ....и даже средней натяжки струны в 1.5 миллиметра, этого более чем достаточно на ближайшие 15- 20 лет( скорее сгинет проволока )
Не проще.
Сварки нет.
Для резьбовых отверстий свои диаметры отверстия идут , они редко совподают с целыми числами
Tighten the cable up more so that when the threads rip tf out it'll do some real damage 🤩
😂😂
Todo mis respetos para este señor
Okay first thing who sets a steel pole to even do this 😂😂😂
Slavs who creatively acquire materials from job sites when everyone is piss drunk to notice?
Step drills are awesome.
В струнных карнизах этот механизм прочнее, надёжнее, и даже дешевле.
next day rusty, next week unscrewed 😅
That can be mitigated with a thread locker.
hahaha, that's a good one.
That's an awful lot of work when you can buy an electric fence ratcheting tightener from Tractor Supply for about $8.
If u don’t have the correct size bit best bet would be to drill through both sides and put nut on both sides once tight
I don't have ratchet bolts on my fence.
Does anyone?
I Looked In My Garage I Couldn't Find Any That Clicked
А можно просто использовать талреп
Это слишком умное слово😂
Я со стропальщиками, однажды, на стропилах, на стройке, слушая рэп, пил до талого, но даже они не знали что такое талреп...
Ну когда его нет под рукой, но очень надо, тогда так :)
@@DUDENOFFну если нет талрепа то у любого точно в хозяйстве есть шуруповёрт, сверло, мечик, болгарка, болт или шпилька, гайки, ключи и даже стяжки, но талреп это роскошь😂
@@TIGwelderprof Метчик!
You could also trim it down and put another nut on the end to clamp the wire in place.
Поволку нужно крутить в другую сторону. Против самовыкручивания!
😂😂😂что в лоб, что по лбу! Куда не крути, проволока будет действовать в обратную сторону.😅
@@hedgehogfog4622но будет закручивать шпильку а не выкручивать
@@tvbox1A95xf2 каким образом? Шпилька по часовой закручивается. Натяжение происходит путём ЗАКРУЧИВАНИЯ шпильки. Трос тянет в обратную сторону. Вы это видите по-другому? Как? Даже, если трос заводить снизу шпильки, тянуть он будет в противоположную сторону - откручивать.
@@hedgehogfog4622голову включи, ооооочень сильно помогает. Закрутил шпильку БОЛЬШЕ чем требуется, вставил проволоку, ВЫКРУТИЛ шпильку, законтрил гайкой. Теперь, когда проволока будет тянуть, она будет сама закручивать шпильку. Если тебя напрягает, что проволока пойдет в итоге снизу шпильки, просто отзеркаль и делай в обратную сторону, чтоб проволока тянулась не слева направо, а справа налево.
@@alexanderandreev9463 😁успехов, головастый! Гладко было на бумаге🤣
This is brilliant!!! Who thinks this up?
A second nut, on the end will completely prevent the wire from working loose.
👍🤝
It's not going to work loose it's under tension
@@XXXCRSPL With high winds vibrating the wire over 70% of the time and frequent seismic activity in our area, we don't take chances with our fences.
We also use non-slip locking washers on any locknuts too.
@@XXXCRSPLit will come loose, safety wire is done like that but the opposite way, I do it every day for work
This trash channel replied to you like ‘Thanks brother I never thought of that!’
The fact that it's hollow is why I might tap with a drill. I would advice not using a fast power tool to tap with. But in something like this it should work out. You're barely cutting any actual threads and it's not gunna bottom out and snap.
I would have screwed up the bolt when he put the slit in it for the wire.
Законтрить на краю шпильки две гайки между собой,ключом держать за внутренюю и закрутить гайку у трубы.
Сколько курток уже порвал ? 😀
Actually the tapping tool contains 3 tools for each size become sharper he only used 1 that will never stay sharp
Those threads are mint 🤣
Be careful running that’s tap in with a drill
yeah never use a drill to tap a hole...
Always use an impact gun
@@shotgunsniper1530Yeah, because an impact gun would be less likely to snap the tapping bit 🤦🏼♂️
@@shotgunsniper1530crescent wrench lmao
Double lever hand tap and or a triset tapping tool handheld would be fine too.
A channel full of "Purists" here. I tapped with my drill for years. Just put the clutch down low, like 12. Below #10 screw, best to do by hand.
Можно было резьбовую клепку поставить, надежнее было бы!
так-то можно и крючок приварить, кольцо прикрутить, талреп повесить, да чего только нельзя сделать :D суета ради суеты, шпильки пилить
@@siemax16 согласен, можно сделать что душе угодно
На суперклей примаздюкать.
😅😅
This is really awesome!
How do you get the little bell to ring after tightening the bolt?
Зайчик! А ты ёлкой дырку десяточеу просвердил и резьбу М10 нарезал? Ай молодец... Я у мамы починил! 👍
Wow those threads seem awfully loose lol
One thing I learned in this video...always lube the hole first .
My soul just died when he used that tap.
My soul just died when I watch this video.
Намотал проволоку усилием на откручивание шпильки, лучше проволоку в другую сторону мотать.
Да там пофик в какую сторону. Шпилька держится на одной нитке, при этом рычаг мама не балуй. Малейшее усилие на проволоку, и вся эта конструкция разваливается.
If you get a pair of pliers or even two, you can bring them with you instead of always going to the "wire pole" for projects
Indeed I made exactly the same thing for a clothesline
Just your hands, a steep bit, a tap, a drill, a grinder, & cut off wheel. 😊
Для этого, давным давно,придумали талреп.
они дорогие...если на виноградник то оч затратно..
@@---lm9zl, зато экономно по времени.
А так вы вместо быстрой натяжки проволоки будете 100 шпилек болгаркой пилить
Wind the wire counter clockwise so it doesn't want to come loose. That lock nut will not stay tight forever
Ive been on the internet so long my first thought was 'oh they the put them on drills now?'
😂
Don't waste your time. Hire someone that has half a clue.
No thats called wasting money
Не надо до доктора дью отправлять однозначно,,,Динисыч,,,
Brilliant execution!
👋🤝❤️
Fantastic, i need a few in the office........
You dont use taps in screw guns, unless you like buying lots of taps.
"with your own hands"
Uses electric drill, electric angle grinder!
And don't let it stick out as far and put a cap nut on! Like you did it it'll hurt someone.
😂❤🎉😢😮😅
Like the neck high garrot wire, isn't the main issue here😂😂
Works good in the desert.
Wait until it has rained a few times.
and the actual tension of the cord was on the direction to loosen up the bolt 😅
The zip tie works. I just use a marker.
It’s a step bit you don’t need to mark it duhh
And the ratcheting flat bar..
This is actually one of the first useful things I’ve seen on RUclips most take 100 mins at 195$ an hr for a 37$ tool 😂
Меня настораживает метчик в шуруповерте. И нарезание резьбы без смазки, порвет же на таких скоростях.
1борот в металле должна быть смаза маслом
Меня вообще настораживает резьба в полтора витка.
Он же маслом смазал
@@Shishigovec токари не веретенку используют. Да и два витка резьбы....
Watch again. He applied cutting compound and there is nothing wrong with using a battery drill as a tap wrench in galv metal. Just go slow on clutch setting and back it off. What is slightly disturbing here is that tread will rust after it was cut.
Who comes up with these so called hacks? Idiotic and much easier ways than this!
You've got serious dance moves!
I had to watch it five times before I realized its steel and not concrete.
😂😂🤗👋
Сомнительная конструкцыя. Там резьбы два витка. Сельнее надо натянуть чтобы когда вирвало болт то наверочку. 😂
Два если тройка, а у меня сомнен
кроилово ведет к попаданию. Талреп 200 лет используют, но нет, надо же куда-то свой гениальный ум приложить)))
Never ever use a tap in a power tool
For this channel it doesn't really matter if you use a pipe wrench as a hammer or a screwdriver as a chisel. This channel has only one purpose and that is to upset people who respect the quality for which a specific tool is made.
Do people actually believe this? Do they think all the threaded holes in their engine block are hand-tapped or some bs like that?
Some people don't understand physics. For those of us who live in the 21st century and understand physics, power tapping isn't an issue as we understand taps break from uneven force.
Das ist aber eine super Idee😊
Thanks 🤝👋❤️
You fucked RHS strength of that seamless column!😅
With the dissimilar metals and ambient temperature differences throughout the years, the wire, nut, bolt and post will eventually disconnect, oxidize and degrade into their separate parent constitutes.
all you had to do was wind clockwise and it might actually do something useful.
Я тоже хочу сказать,что прочность конструкции прямо зависит от толщины стенки квадратного профиля
People just love to post themselves playing tinkertoys.
yes, you keep doing it. you doing great! ...arest this man!
A tread that's 2 mm long, I wouldn't trust that so much.
Столько сил и средств потратить, зачем? Напрашивается только один вывод: леплю хуйню ненужную лижбы сцуа в тренд нахуй тут лайк ставить обсалютно бесполезная хуйня
Depends what you use it for, and actually in this case, you can't count just the threads in pipe wall, a nut counts too. In fact, without nut and pipe threads being tight, nothing happens. I hope you understand how this is not a 2mm thread connection.
What's the point of the nut when it loosens the same direction as the bolt? Surely if it was to come loose they'd just unscrew together in unison? To me it seems the nut is only useful if there's something the other end of the bolt.. or have I missed something?
Since the hole is threaded, the bolt threads in and then the nut acts like a lock nut, putting pressure on the bolt so it won't back out. ie; the nut, when screwed in against the steel surface pushes against it, and also pulls the bolt, thus helping to keep it from rotating out.
It’s a jam nut goober
You missed something.. how a thread and nut works 🤦
@@VinceramaI would opt for also using a lock washer but that’s just me I guess
Go look at how a tie rod end on your car works.
If that's an electrc fence and the pole is metal he's grounding out the charger.
Straight to the comments to see what all the resident experts are saying! 😄
Хрень, талреп в помощь
Algo no cuadra el taladro gira al revés cuando están perforando, donde venden esas brocas y machuelos izquierdos para ir a comprar
Please no one use this idiotic tip
I love those bits!
Wow I love it , I put up miles of fences myself and I wish I had this !!!
Thanks bro 🤝👋 I'm glad you liked it ☺️❤️
we all liked it; it's an amazing idea, i needed that, will use it tomorrow; thanks ,
about the comments about the tap at 1000 rpms...lol people here do not realize that it's a thin plate, i do that all the time and the taps still last forever @@Tips_Workshop
(i will definitely wind it the other way, of course)
Yes anytime you find yourself grinding a bolt you know you must be doing something right
I like how he tightened it with a parallel lol. Definitely a tool and die guy😅
Fixing the title: "Ha! Made you look!"
don't forget to use a washer with the bolt they are important
👍🤝👋
Brilliant idea
You never EVER tap with power tools. Only hand tools.
That hole seemed too large for the tap.
Leave the tail longer. When you are done tightening, wrap is round the taught wire, now the nut is not needed to keep the wire tight.
Always use the hand tap. The drill will break it almost every time.
👌🤝
First big thing to go thru that is ripping the bolt out, and also a body part