Kawasaki Ninja 650 Quad Lock Fork Stem Install

Поделиться
HTML-код
  • Опубликовано: 11 дек 2024

Комментарии • 64

  • @Sinbad683
    @Sinbad683 2 года назад

    I highly suggest you get the vibration dampener. I had the ram mount installed on my Ninja 650 prior to the quad lock. The vibrations destroyed my Iphone's Camera's Stabilizer and I ended up buying the quadlock with the vibration dampener. So far so good. I've been on long rides with the quad lock and Vibration dampener and my Iphone's still ok.

  • @ShawnFootman
    @ShawnFootman Месяц назад

    life saver

  • @Italianborn
    @Italianborn Год назад

    I bought the exact one for my 24 zx6r and i lost the screw into the steerig, it just slipped off as i pushed it in !

    • @Daniel.Dong21
      @Daniel.Dong21  Год назад +1

      Is there a plastic or rubber plug in the bottom of the hole? I did had that problem but lucky enough there is a plug that you can remove out

    • @Italianborn
      @Italianborn Год назад

      @@Daniel.Dong21 i did fin it and fix it..thanks

    • @Daniel.Dong21
      @Daniel.Dong21  Год назад +1

      Glad you did it!!

  • @beavorpigs
    @beavorpigs 2 года назад +2

    Thanks for this video, very helpful

  • @arbazsiddique4241
    @arbazsiddique4241 Год назад +1

    Does it lock in place? I tried to tighten it but it wont because the lower plastic keeps spinning with it. So the mount is bascisally inside the handle but not fixed. It rotates and i am not sure if thts how it is supposed to work

    • @Daniel.Dong21
      @Daniel.Dong21  Год назад

      It should be lock in place, try the bigger pieces that they provide

    • @arbazsiddique4241
      @arbazsiddique4241 Год назад

      @@Daniel.Dong21 the bigger one is too big for the hole

    • @MW3PWNAGE101
      @MW3PWNAGE101 Год назад

      @@arbazsiddique4241 ive been having the same issue, and i cant get it back out of the hole. i dont know what to do

    • @arbazsiddique4241
      @arbazsiddique4241 Год назад

      @@MW3PWNAGE101 underneath the handle, there is a tube that is blocked by a rubber. Pop the rubber out and the piece should fall down to the floor. Figured out a few days ago. Lol.

  • @glennojn
    @glennojn 2 года назад +1

    Mine keeps falling apart in the stem on my 2021 so I have to keep tearing it apart to get it back in there for a couple weeks before it falls apart again

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      Try to tight some bolts if it still falling apart. Then might recommend contacting the factory and trying to get the replacement

    • @jacobstaten111
      @jacobstaten111 2 года назад

      you need to use the bigger metal pieces. the hole is too big for the smaller ones and they will fall off

    • @alphawolf8070
      @alphawolf8070 2 года назад

      @@jacobstaten111 the bigger one doesn’t fit my ninja 650

    • @omniaparatus4702
      @omniaparatus4702 2 года назад +1

      @@alphawolf8070 I was having the same issue, any update on the fix? I emailed the company and they said the one they sent was a "defect" but I wasn't too sure about it. I also have a 2021 Ninja 650 and like 10 minutes into my first ride with the mount the peices fell off into the stem.

    • @justinedejesus5082
      @justinedejesus5082 Год назад

      I have the same issue with my Ninja 2021. I need to reinstall the whole thing after every long ride. When installing, does it need to be rigid? or a little movement is ok?

  • @tomtobim9793
    @tomtobim9793 Год назад +1

    Is it compatible with my Ninja 650 2019 ?
    I cant find any informations.
    Thanks

    • @Daniel.Dong21
      @Daniel.Dong21  Год назад

      It should be compatible, they gave two different side to tide for the stem

    • @carsonmeikle2537
      @carsonmeikle2537 Год назад +2

      NO! Quad lock is not compatible if it has the hexagonal fork stem mount. I just tried on my ninja 650 2023 and it doesn’t stay tight. Notice in the video how the entire mount keeps spinning, because it is not compatible,

    • @pistol237
      @pistol237 Год назад

      @@carsonmeikle2537 what does work? I have a 2023 as well

  • @jadsiawolf
    @jadsiawolf 4 месяца назад +1

    It won’t fit into my bike, it pops down half way and then won’t go any further

  • @effect9704
    @effect9704 Год назад

    I have a 2023 ninja 650 and when I put it back and I try to lock it but it move a lot and it’s not locked in it is it normal ?

    • @Daniel.Dong21
      @Daniel.Dong21  Год назад

      There should be two size of spring to expand. Try the bigger one?

  • @bukopanjon
    @bukopanjon Год назад +1

    i dropped the plastic piece at the end of the mount thru the tube and was freaking out if it was stuck there until you showed that you can get it if it falls lmaoo

    • @Daniel.Dong21
      @Daniel.Dong21  Год назад +1

      I glad that I help with that, i did freak out when i drip that plastics into a tube

  • @jean-francoisbeauchamp6224
    @jean-francoisbeauchamp6224 2 года назад +2

    What version is this quadlock ? Regular or pro ? I have the same bike, I want the same model you use. It's fix perfectly.

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      There is no version. When you go on the website you grab the fork stem install one, if you feeling more fancy add the vibration damper. Make sure you get the quad lock phone case too to mount on to the quadlock mount

    • @jean-francoisbeauchamp6224
      @jean-francoisbeauchamp6224 2 года назад

      On the Quadlock website, there are 2 version of the fork... Fork Stem Mount ( And ) Fork Stem Mount Pro. Witch one you buy in this video ?

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      It was just a fork stem mount. The pro they add the charger cords, top fancy for what i need 😅. The fork stem mount is a simple and a reasonably price

    • @mathewmassara5143
      @mathewmassara5143 2 года назад +1

      The main difference between the normal and the pro is the pro is made of metal

  • @5sunny01
    @5sunny01 2 года назад +1

    i have a 2020 ninja 650, the fork stem hole is a hexagon, is yours also hexagon? also how is it still working out for you?

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      It work awsome and yes it is hexagon!!

    • @5sunny01
      @5sunny01 2 года назад

      @@Daniel.Dong21 perfect, does it get loose? I heard someone mentioning that it doesn’t stays well

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      @@5sunny01 unless you follow the introduction. My haven’t gone lose or twisting around at all, it stay tight in one apot

    • @Pabloman333
      @Pabloman333 Год назад

      @@Daniel.Dong21 what about the lip at the top of the hexagon? Quad Lock states that it should be a straight through hole or don't use their stem mount.

    • @thor4318
      @thor4318 Год назад

      Ding did you get one I have 650 2020 ninja to and I’m unsure what one to get

  • @pinnaclegaming6019
    @pinnaclegaming6019 2 года назад +1

    What did you say right at the end?. Did it fit?. I saw you try to put it on but it didn't go on :)

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      It did fitt. Just had to play around with it a little bit. I didn’t read the introduction well 😅

  • @salvatoreamelio4453
    @salvatoreamelio4453 10 месяцев назад

    Get the pro for the ninja 650 the std will not tighten correct

  • @joseorellana7923
    @joseorellana7923 2 года назад +1

    what mirrors are you running? how do you like them?

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      I got a wind stealth mirrors. I love them, they look very aggressive and look coolll as hell. Cons thing about it that you cant really use their small mirrors 😅

  • @sukhvirsingh4615
    @sukhvirsingh4615 2 года назад +1

    Sheesh🔥🔥

  • @Sebba619
    @Sebba619 2 года назад

    How is the visibility to the motorcycle display with the phone mounted?

    • @Daniel.Dong21
      @Daniel.Dong21  2 года назад

      I can still see the motorcycle display. 10/10 doesn't block the view unless the way you like it setup

  • @axtellnintytwo6084
    @axtellnintytwo6084 2 года назад +1

    Is that a 2022 ninja 650?

  • @mightymike20
    @mightymike20 2 года назад

    Where did you get those mirrors ?

  • @jmcanuck2
    @jmcanuck2 Год назад +2

    Quad lock stem mount won’t work on your Ninja as the stem has a hexagonal lip and opens to a much bigger hole past that lip. Even if you tighten all the way it won’t help. That’s why it says in the instructions (with pictures) that if there is no lip in the tube it is safe to install but if there is a lip do not install. The later model Ninja 650 has a lip at the top of the tube. I know this because I made the same mistake you did.

    • @Winchester97x
      @Winchester97x 9 месяцев назад +1

      So the Quadlock Fork Stem Mount does not work on the Ninja 650 MY 2023?

    • @xinyu5007
      @xinyu5007 9 месяцев назад

      I wonder too, I have the 2023 ninja 650 and cannot find any phone holder

    • @Winchester97x
      @Winchester97x 9 месяцев назад +1

      @@xinyu5007 Hey,
      Yesterday I‘ve bought the Stem Mount Pro Version (all black one) and it works

    • @xinyu5007
      @xinyu5007 9 месяцев назад

      @@Winchester97x thanks a lot friend 👍 you can tell me if the phone vibrate on when it's on the holder ? or it doesn't move at all

    • @Winchester97x
      @Winchester97x 9 месяцев назад +1

      @@xinyu5007 it does vibrate without the vibration dampener. So i‘d recommend that you buy the dampener too

  • @rt2255
    @rt2255 Год назад +1

    Does anyone just ride a bike anymore. 10 minute video on phone holder. Damn i miss ronco commercials just as interesting😢