Thank you for detailed video if possible can you please tell how much does it cost(filament only) to print this stuff ? eg power bank and bulb holder and how much electricity cost if we run it for 20 hour ?
Nice video brother good job. Sharing with the community I follow now. Do more calibration tests videos showing how to take advantage of this awesome video. Proud of the quality
What an amazing video and I specially liked your simple yet nice voice. you have a very sweet voice, i am a student and i am on tight budget . is it good to buy this printer. I would like to know from where exactly you got the circuiit board for powerbank
Hi.. I need your help... While feeding the filament my filament is getting damaged with an impression before inserting into extruder...and also after certain point x-axis is varied and extruder starts producing an object outside the limit.. Plz help me on this.. Thanks in advance
could you print an model with ABS material and review the result, and show how to improve print quality, and show the improved output after tweak please. because I wish to buy this printer.
Is anybody else's printer have to be leveled every single print like it forgets where it's supposed to be at proximity sensor on top sucks or something
Yeah, I have the ET5X and am bummed about the firmware. You can get it to work okay, but it still is a bit of a pain in the ass. Hopefully they'll be fixing that sometime in the near future
Great
Thankyou😃
Refund approved :)
I was having a lot of problems getting mine going. Your video is so much better than the official Anet one. Thanks!
Your tutorial is truly useful for first time user of this printer. Best regards from Malaysia.
Thank you for detailed video
if possible can you please tell how much does it cost(filament only) to print this stuff ? eg power bank and bulb holder
and how much electricity cost if we run it for 20 hour ?
for Lithophane project, one roll of 1kg PLA filament could print 20-30 pieces. which means only 1-3 dollars for each.
Hi I like the video and planning to buy one, but how is the power consumption? Does it consume a lot?
Which software using best for modeling...?🤔
Nicely explained. Helped a lot. Thank you
Price kitni hein eski?? 5 month pehle wali video mein price Rs.15000 thi ab sidha Rs.21000 kya fark hein usme or esme?? Keval pro word ke alava
Nice video brother good job. Sharing with the community I follow now. Do more calibration tests videos showing how to take advantage of this awesome video. Proud of the quality
Please create detailed video on how the software works, how you printed the power bank with logo on it
Can you plzz make a review of the 3d printer you have used in your video
dont mess with the level sensor!!!! Took me some while to re-calibrate after turning the screw...it does not seem to be so sensitive :p
Please do make a video on lithophane lamp
Can u plz make a separate video for the power bank...
What an amazing video and I specially liked your simple yet nice voice. you have a very sweet voice, i am a student and i am on tight budget . is it good to buy this printer. I would like to know from where exactly you got the circuiit board for powerbank
Thanks bro, yes this printer is good to buy, and this circuit is easily available online, try searching for powerbank module or circuit
any link (Stl ) for lithophane Lamp please?
Thanks
Bhai is prenter se Apne Jo powerbank ki body Bani ho usme time Kitna kaga
What did you use to create the lithograph
Hi.. I need your help... While feeding the filament my filament is getting damaged with an impression before inserting into extruder...and also after certain point x-axis is varied and extruder starts producing an object outside the limit.. Plz help me on this.. Thanks in advance
Hello, how did you get the auto level numbers so close to 0.0? When I hit auto level my numbers are all over the place.
Which 3d printer is best
Anet Et4 or Anet Et4 Pro?
The Karambit is Perfect!
Well explained
could you print an model with ABS material and review the result, and show how to improve print quality, and show the improved output after tweak please. because I wish to buy this printer.
Nice video thanks!. Can you make a video on Lithophane 3D designing with Cura settings for printing it
Thanks!! Well explained, and to the point!
Sir please make a video on how to make Automatic hand sanitizer dispenser using ultrasonic sensor and Arduino with time delay
good project
Fantastic video. I subscribed.
Nice bro
Is it possible for us to move a laser engraver on to anet et4 Pro?
Nice 👍
thank bor for sharing the informathin
can I ask what the difference between pro and not pro
Hey there, make a walky talky set with a set of plastic case 😀😀 waiting #viral_science
please make detailed video on setup like auto levelling and all that stuff
Its perfectly explained in the video
@@ViralScience yea but not the same scenario with other printers
Can you please make a video on how to make custom stuff on the 3D printer.
Sure I will try to make specific video for this
Nice!
Thankyou😃
Nice job viral
Hi Saurabh
Excellent but from where that much money 💰 ??.. That's my doubt
Op Knife bro
the best part is it is ultra quite
Pls give the stl file and the PCB circuit board link in the description.
Bro u are doing so well but i am very sad to see your likes and view 😔
Bro I got error in esp32 cam ....can u help to solve that error
I want to know how to do printing from this
Sir you belongs to which branch of engineering
I am not engineering student, I am pursuing B.sc I.T.
@@ViralScience ok sir
@@ViralScience sir in mechanical engineering we can learn about Arduino ,nodemcu,resberry pie
FIRST First ! Big Fan😂
Thanks bro✌😆
Is anybody else's printer have to be leveled every single print like it forgets where it's supposed to be at proximity sensor on top sucks or something
How to program it?
if they hadn't effed up the firmware this would have been a pretty decent printer for that price....
Yeah, I have the ET5X and am bummed about the firmware. You can get it to work okay, but it still is a bit of a pain in the ass. Hopefully they'll be fixing that sometime in the near future
Powerbank Giveaway Sir🥺
I already gave you one😅
IT print better then ender 3 v2
Printing from SD Card is oldschool. Try Octoprint. Its much better.
🤘🤘🤘🤘
now you can sell your own brand power bank
I need some support from you bro for my channel
Full support bro🤟
@@ViralScience thz bro
Third one 😐
WHAT IS YOUR AGE??
20
In which college r u studying bro 😄 🤣 😂 😆
Giveaway