Left the factory adjustment, what you seeing is the uplight no issues with traffic, the light output is more the beam it would remain at the factory height in my mind. We appreciate you watching please subscribe like and share and have a happy holiday
@@JustCantSitStill I put LED’s in my 4Runner and didn’t make any adjustment, kept getting flashed at night time, I adjusted the screw in the headlight about a turn and no longer blinding people now.
Normally the right side lowbeam is set just a little bit higher than the drivers side from the factory. That 1-2 inch difference is normal. Usually ( in a Toyota anyways ) one 5urn on the headlight adjustment screw will raise or lower the beam by 1 degree at about 25 feet. You didn’t show if you managed to get the cover back on the headlight housing. Since Toyota put the headlight bulb mounting hole “ off centre” in the housing in many cases the plastic cover can’t be put back on properly. I put Lasfit H11s in the lowbeam and 9005 s in the high beam of my son’s Buick Encore. The build wasn’t an LA I think it was a LC. The bulbs all wen5in easily except for the passenger side lowbeam. Due to a smaller opening in the housing the bulb was almost impossible to get into the hole because the wiring harness was up against the side of the inside of the housing. I removed the included gasket and put the halogen one on and it was still too tight. The Lasfit 4 bulb kit included two sets of even thinner gaskets. On3of those allowed the bulb to be screwed in. The lowbeams were almost like high beams so I lowered the adjustment screw two full turns. The beam is still further down the road than the lowbeam halogens were so I will lower it a couple more turns on the drivers side as he’s had a couple drivers flick their high beams at him. The Buick doesn’t have projector beams.
Back cover went back on fine, I did not adjust anything far as height I don’t think it’s needed beam seemed to follow factory and nothing was done other than the bulb replacement. Thanks for watching happy new years
@JustCanSitStill First of all. That’s the best RUclipsr name ever 🤣🤣🤣 I love it. 2: I’m glad u bought the right product for ur wife’s kickass 5th 4Runner. Buying a Lasfit led products are excellent. The 30 watts or 3 time brighter than stock makes a huge difference. These LA plus that are high lot recommended, for all in one unit, it never fails. I want to see car light review a RUclipsr that do the led automotive bulb test and performs consistently. I want to know how many temperature it makes. If it’s around 130 degrees. That be very impressive and it would makes sense why people loved it with no issues. I own a 2015 lifted Scion xB, running with H11 Lasfit - LD Plus switchback. I don’t have dog lights so might as well put them on my low beams. These 6000k pure white and 3000k golden yellow are a must. I had to get them because 1: I love the two colors. We live up north Illinois, need these for night time and for weather conditions. And plus, for the look of it. With external driver is what I love the most because of the heat management. Plus I had to get the anti-flicker system. I shouldn’t need but I don’t want to come across with flickering issues or color shift. I need another switchback for my 9005 high beams. U simply cannot go wrong with lasfit. Best automotive led lights ever. And I highly recommend both lasfit, and even auxito. Again. Thanks to car light reviews, these are my top two recommendations. ❤️🔥❤️🔥❤️🔥❤️🔥 Stay safe guys. These led lights makes us feel safer. Despite other drivers sayin it’s too bright or u will get flashed lol. Let them.
@@JustCantSitStill u bought another set as a backup? Honestly, not a bad idea. I don’t mind having another set lol. I should do that. So we’re talkin almost $400 bucks total…… Worth it lol
Would have like to see how it looks with the high beams. I also prefer the bright white vs amber white. Plus man you just can’t beat free. I hope you didn’t blind drivers as this new one is higher. Thanks for the video 👍
No one has flashed us or complained yet , light output and distance is great, the amber high beams are a little more dim then I normal high beam but we don’t need or use them so at least they kinda cool as the DRL
Hopefully you've corrected their positioning. They're definitely aimed too high. Will easily blind an opposite driver. It's in the instructions. The bulb diodes must be in a 3-6 o'clock position.
LED bulbs typically do not work well in a reflector housing, works great in a projector housing, if you look closely at newer generation factory installed LED housings, they are an engineered reflector style that works well with LED's, others use a projector style with more but smaller lenses, but the way they are designed are superior to anything aftermarket
Wow, what a difference . Great video as always. Great content .
Yes she is extremely happy with this change.
Hopefully you adjusted the aim down a little, because it looks like it’s a bit high and would blind oncoming traffic
Left the factory adjustment, what you seeing is the uplight no issues with traffic, the light output is more the beam it would remain at the factory height in my mind. We appreciate you watching please subscribe like and share and have a happy holiday
@@JustCantSitStill I put LED’s in my 4Runner and didn’t make any adjustment, kept getting flashed at night time, I adjusted the screw in the headlight about a turn and no longer blinding people now.
How are these bulbs holding up?
Great not a single issue.
@@JustCantSitStill what are you running for your fogs?
@@melissacockrell9293 stock
@@melissacockrell9293 remember this is a TRD pro so they came with factory LED fogs
@JustCantSitStill do you leave your headlights on all the time day & night? Also, did you clock these at all?
Lasfit is a great company with quality products, only bulbs my family runs.
Yes so far she still loves them , It was great to get the opportunity to work with them.
Normally the right side lowbeam is set just a little bit higher than the drivers side from the factory. That 1-2 inch difference is normal. Usually ( in a Toyota anyways ) one 5urn on the headlight adjustment screw will raise or lower the beam by 1 degree at about 25 feet. You didn’t show if you managed to get the cover back on the headlight housing. Since Toyota put the headlight bulb mounting hole “ off centre” in the housing in many cases the plastic cover can’t be put back on properly. I put Lasfit H11s in the lowbeam and 9005 s in the high beam of my son’s Buick Encore. The build wasn’t an LA I think it was a LC. The bulbs all wen5in easily except for the passenger side lowbeam. Due to a smaller opening in the housing the bulb was almost impossible to get into the hole because the wiring harness was up against the side of the inside of the housing. I removed the included gasket and put the halogen one on and it was still too tight. The Lasfit 4 bulb kit included two sets of even thinner gaskets. On3of those allowed the bulb to be screwed in. The lowbeams were almost like high beams so I lowered the adjustment screw two full turns. The beam is still further down the road than the lowbeam halogens were so I will lower it a couple more turns on the drivers side as he’s had a couple drivers flick their high beams at him. The Buick doesn’t have projector beams.
Back cover went back on fine, I did not adjust anything far as height I don’t think it’s needed beam seemed to follow factory and nothing was done other than the bulb replacement. Thanks for watching happy new years
What year gen 5 is this?
2020
@JustCanSitStill
First of all. That’s the best RUclipsr name ever 🤣🤣🤣 I love it.
2: I’m glad u bought the right product for ur wife’s kickass 5th 4Runner.
Buying a Lasfit led products are excellent. The 30 watts or 3 time brighter than stock makes a huge difference.
These LA plus that are high lot recommended, for all in one unit, it never fails. I want to see car light review a RUclipsr that do the led automotive bulb test and performs consistently.
I want to know how many temperature it makes. If it’s around 130 degrees. That be very impressive and it would makes sense why people loved it with no issues.
I own a 2015 lifted Scion xB, running with H11 Lasfit - LD Plus switchback. I don’t have dog lights so might as well put them on my low beams.
These 6000k pure white and 3000k golden yellow are a must. I had to get them because 1: I love the two colors.
We live up north Illinois, need these for night time and for weather conditions. And plus, for the look of it. With external driver is what I love the most because of the heat management.
Plus I had to get the anti-flicker system. I shouldn’t need but I don’t want to come across with flickering issues or color shift.
I need another switchback for my 9005 high beams.
U simply cannot go wrong with lasfit. Best automotive led lights ever. And I highly recommend both lasfit, and even auxito.
Again. Thanks to car light reviews, these are my top two recommendations. ❤️🔥❤️🔥❤️🔥❤️🔥
Stay safe guys. These led lights makes us feel safer.
Despite other drivers sayin it’s too bright or u will get flashed lol. Let them.
Thanks for watching and the great comment , she is still enjoying them, I bought another set for back up.
@@JustCantSitStill u bought another set as a backup?
Honestly, not a bad idea. I don’t mind having another set lol. I should do that.
So we’re talkin almost $400 bucks total……
Worth it lol
@@JustCantSitStill I had these so far in 3 months. No issues at all yet and they are excellent.
How are they holding up?
Perfect 👍
Wait until you change the highs to LEDs also, big difference.
I have the same ones but for some reason mine keep falling out and won't stay in the housing how did you install yours??
They were tight but I just lined them up and push and twist
@@JustCantSitStill I’ll have to try that because I’ve been very irritated with mine
Update I just tried they still fall out
@@a_singh96 man I am not sure 🤔, was pretty straight forward for me.
@@JustCantSitStill I figured it out
Would have like to see how it looks with the high beams.
I also prefer the bright white vs amber white.
Plus man you just can’t beat free.
I hope you didn’t blind drivers as this new one is higher.
Thanks for the video 👍
No one has flashed us or complained yet , light output and distance is great, the amber high beams are a little more dim then I normal high beam but we don’t need or use them so at least they kinda cool as the DRL
How are the lights holding up are they still working any issues with them going out.
They are doing great , no issues at all. Thanks for watching and the support.
Great video, was excited to order. Link is bad :(
Thanks for watching, sorry they made the discount link for a limited time.
Nice review!
Thanks !
Are these DOT approved so they’ll pass inspection?
No however we have had no issues
Which bulbs are these exactly what model
Pause vid at 2:31
or LA plus H11 6000k
a.co/d/6lXGFJi
with led bulbs, make sure you click the chips on 3 o'clock & 9 o'clock. that'll be the best way to install em.
Not on the 4Runner. The bulb install almost against the fender instead of like a regular headlamp that goes towards the front of the vehicle.
Running leds with led fog lights on in clear night. Let’s have a moment of silence for all the oncoming traffic that no longer have retinas😂
😎
Eh. Fogs are projectors also so I doubt those shine on the faces of drivers.
Hopefully you've corrected their positioning. They're definitely aimed too high. Will easily blind an opposite driver. It's in the instructions. The bulb diodes must be in a 3-6 o'clock position.
The 2024 4runner has a cover on top of the headlight dust cover. Welp…
Isn’t the 2024 led already?
@@JustCantSitStillindeed they are
Would of been nice to see the drive without the fogs on.
Can’t win them all
LED bulbs typically do not work well in a reflector housing, works great in a projector housing, if you look closely at newer generation factory installed LED housings, they are an engineered reflector style that works well with LED's, others use a projector style with more but smaller lenses, but the way they are designed are superior to anything aftermarket
They work well on my reflector high beams for my lifted xB.