You really make great videos that are easy to follow along! I've watched all your videos in the last couple of weeks and gone from zero CAM experience to making actual parts on my small 3018. If you ever feel the urge to make another tutorial It's really hard to find info about pockets/3D pockets. Keep up the good work!
Excellent video. I wasn't aware of the path sanity tool - very helpful. Including the information from path sanity as comments into the post processor output would be quite helpful (overview of stock tools, etc...)
I always use the iternal simulator! Recently, it showed that zig-zag+offset is way better than zig-zag alone (I think about the perimeter like a sawtooth). Sometimes Camotics doesn't like the g-code, maybe due to the post-processing, I still have to find the real cause; it's great to hear about the integration! Anyway thanks for showing/refreshing all these little useful details!
Please make a video on drafted faces on profile in path workbench I just tried to make a path for drafted faces but the path is going on 90 degrees. It is going inside the workpiece And for fanuc controller postprocess is not getting Please make a video for taperd profiles and with fanuc controller
This looks awesome! I would love to have that! But Camotics is still on 1.2.0. Is there any precompiled version of 1.2.2 or 1.3.0 available somewhere? I saw that there is a guide for building on Windows, but this looks rather daunting :D
Firstly this is a great introduction to toolpaths, thanks for posting. This is very helpful for me. As I am new to freecad and milling. For drilling do you use a drill bit or the end mill itself? How do you introduce a tool change operation in gcode? I want to do the drilling operation first, then do the tool change to milling, his can I do this?
Hello! Can you please tell me if the custom stock shape actually works? I've tried to use it. It shows the shape of the body I'm using as stock, but the path always extends as it was cutting from a bound box. This leads to a lot of air cutting above the actual stock. Thank you!
Yes, it works. Though it may not be fully integrated into every operation and feature. For example, I tested it with millface and you have to tell the operation to use the stock shape. Also, the stepdown values are not automatically copied over.
I need to perform a t slot side cut, it's a styrofoam block to be cast later. I know there's a 'slitting saw' template in the tool library that could be used but I'm a little lost on which operation to use to make this work. I was trying to use LeadInOut dressup to fix the startpoint but the simulation always fails. What would be the correct way to perform this operation?
Overhanging cuts aren't really supported but you can probably get there anyway. Try a slot operation. Select a single edge like the long edge on one side. Extend the start and end point as necessary and make the stepdown large enough so you have just a single pass. Not ideal, but it work in my test.
your free cad 0.21 looks way different to mine, I don't have many of the features you see there. I'd start videos with describing your installation of free cad ;)
There are many ways to install and FreeCAD runs on Windows, Mac, and Linux. Trying to cover that topic in every video would be impossible and pretty boring for people who already have it installed. The FreeCAD wiki does a pretty good job of documenting the installation options and process.
Thanks for your work! Your video series about Path help me to start work with CNC. Could you explain somthing about "Cut mode"? When I attemp to change cut mode to Climb or Conventional alwayse get the same result. I want to process job in one cut mode (because low hardness of my CNC) but tools always go in both directions...
This question would be better asked on the forum and please attach a project file. Here I don't know what kind of operation you're creating, your version of FreeCAD, etc. It's possible that there's a bug.
@@sliptonic I caught were you said that on a second video view. Camotics looks very nice, and I'm looking forward to the non-compile version 1.2.2. Thanks.
Obrigado pelo seu video, TOP, não consegui encontrar como adicionar ou instalar o 'Asciidoc', meu Path Sanity gera sempre erro, voce pode ajudar, ou indicar link? Na documentação de FreeCAD apenas menciona que precisa instalar, mas não entedi como instalar 😅
You really make great videos that are easy to follow along!
I've watched all your videos in the last couple of weeks and gone from zero CAM experience to making actual parts on my small 3018.
If you ever feel the urge to make another tutorial It's really hard to find info about pockets/3D pockets.
Keep up the good work!
This is great! I've been using Camotics for simulating for awhile already, but having it integrated so it sets everything up is really cool!
I have been as well. Using a Buildbotics controller for my mill.
Excellent video. I wasn't aware of the path sanity tool - very helpful. Including the information from path sanity as comments into the post processor output would be quite helpful (overview of stock tools, etc...)
This was really helpful while diving deeper into the Path Tool. Thanks for the video.
Amazing work as always 👍👌
I always use the iternal simulator! Recently, it showed that zig-zag+offset is way better than zig-zag alone (I think about the perimeter like a sawtooth).
Sometimes Camotics doesn't like the g-code, maybe due to the post-processing, I still have to find the real cause; it's great to hear about the integration!
Anyway thanks for showing/refreshing all these little useful details!
i love your freecad content, very helpful for me.
Awesome, thank you!
Great video. I think it's time for me to jump into this.
Excelente. Muito obrigado por compartilhar seu conhecimento! Thanks from Brazil!
Thanks ! Good tips
Please make a video on drafted faces on profile in path workbench
I just tried to make a path for drafted faces but the path is going on 90 degrees. It is going inside the workpiece
And for fanuc controller postprocess is not getting
Please make a video for taperd profiles and with fanuc controller
Thanks i didn't use path wb but i will try after than this video
This looks awesome! I would love to have that! But Camotics is still on 1.2.0. Is there any precompiled version of 1.2.2 or 1.3.0 available somewhere? I saw that there is a guide for building on Windows, but this looks rather daunting :D
Thank you
Firstly this is a great introduction to toolpaths, thanks for posting. This is very helpful for me. As I am new to freecad and milling.
For drilling do you use a drill bit or the end mill itself? How do you introduce a tool change operation in gcode? I want to do the drilling operation first, then do the tool change to milling, his can I do this?
Hi I would need to make only a cut on one side of a rectangle how to do thank you
Want to see a video of a 4 axis round item , how to set the origin , and make gcode for milling .
Thanks .
Hello!
Can you please tell me if the custom stock shape actually works?
I've tried to use it. It shows the shape of the body I'm using as stock, but the path always extends as it was cutting from a bound box. This leads to a lot of air cutting above the actual stock.
Thank you!
Yes, it works. Though it may not be fully integrated into every operation and feature. For example, I tested it with millface and you have to tell the operation to use the stock shape. Also, the stepdown values are not automatically copied over.
Wow 😍😍😍
I need to perform a t slot side cut, it's a styrofoam block to be cast later. I know there's a 'slitting saw' template in the tool library that could be used but I'm a little lost on which operation to use to make this work. I was trying to use LeadInOut dressup to fix the startpoint but the simulation always fails. What would be the correct way to perform this operation?
Overhanging cuts aren't really supported but you can probably get there anyway. Try a slot operation. Select a single edge like the long edge on one side. Extend the start and end point as necessary and make the stepdown large enough so you have just a single pass. Not ideal, but it work in my test.
your free cad 0.21 looks way different to mine, I don't have many of the features you see there. I'd start videos with describing your installation of free cad ;)
There are many ways to install and FreeCAD runs on Windows, Mac, and Linux. Trying to cover that topic in every video would be impossible and pretty boring for people who already have it installed. The FreeCAD wiki does a pretty good job of documenting the installation options and process.
Версия FreeCAD 0.21? Это как я понял сторонняя сборка и существует под Linux?
В разделе Path я вижу некоторые функции отсутствующие в версии 0.20.2
Version 0.21 is the development version. We just entered feature freeze. It should be released in a few weeks
Thanks for your work! Your video series about Path help me to start work with CNC.
Could you explain somthing about "Cut mode"?
When I attemp to change cut mode to Climb or Conventional alwayse get the same result.
I want to process job in one cut mode (because low hardness of my CNC) but tools always go in both directions...
This question would be better asked on the forum and please attach a project file. Here I don't know what kind of operation you're creating, your version of FreeCAD, etc. It's possible that there's a bug.
Is Freecad version .20 good for everything you talked about?
Everything except the Camotics integration. That's new in the development branch
@@sliptonic I caught were you said that on a second video view. Camotics looks very nice, and I'm looking forward to the non-compile version 1.2.2. Thanks.
Obrigado pelo seu video, TOP, não consegui encontrar como adicionar ou instalar o 'Asciidoc', meu Path Sanity gera sempre erro, voce pode ajudar, ou indicar link? Na documentação de FreeCAD apenas menciona que precisa instalar, mas não entedi como instalar 😅