WoW ! Can not thank you enough for excellent video. I am retired female. I really needed financially to fix this problem myself. Ordered NEW tail light assembly -right / left side. Got all new bulbs, grease and sockets. LEARNED secrets from your video. Now, to install and I'm pretty handy with this kind of stuff. Hope there will be many 'great returns' to your life for having giving this " helping hand" to those who watch this.
After getting pulled over by Sheriff and warned, I fixed mine for the time being by just removing and reinstalling the same sockets. Connections on this Jeep model get hot and burnt. So also learned how to replace when i can - when i can afford to. Thank you Sir - good video !
Mine turned out to be a simple bulb replacement so I was lucky! Thank you the great instructions! Highly recommended video for anyone with a brakelight issue.
Thank you and Awesome video and taillight is back up and running, quick note if you don’t have the special lube , I used petroleum jelly and it worked fine
Thanks for sharing. I ordered a complete set of assemblies, sockets, bulbs and grease as you suggested. I am sending your video to my sister so she can see how its done properly they are not mechanically inclined so I assure you that your video will be a big help. Thanks again.
There are two locks. 1) is the yellow snap you push to one side. 2) right down in the middle there is a very small tab that you need to lift up... I have a 04 Jeep Cr Cher Limited. They may not all have it but the one I had did have it.
I have tried everything. New bulbs, New sockets, and now whole New taillight casing. But my taillight still doesn't turn on. Brake and signal light works fine. When I turn on headlights at night the taillight on drivers side won't go on. Fuses are fine. It was working a couple of weeks ago. I'm at a loss. I've been stopped by the sheriff twice already. What can it be? How can I fix this? It's driving me nuts. Any thoughts, ideas or suggestions will be appreciated.
Those sockets can be a real pain the butt. Make sure when you twist the socket that they are seated into the circuit board correctly and locked into place. They can be hard to twist all the way in. Hope this helps you out
Super late reply, but I have a similar issue (my right rear brake light doesn't turn on regardless of whether the headlights are on) and with mine it's clearly an issue with the removable wire connector and not the bulbs or the socket. To test it I stuck one of the head rests against the brake pedal and floor mat to complete the circuit then took out the taillight assembly and if I jiggle the connector around the brake light will start to work but it fails again as soon as I drive anywhere. I don't know enough about the light circuits to say whether the your issue could be caused by the same fault but I'm gonna try to take the connector apart tomorrow and if I succeed I'll let you know.
Hey Rose, I’ve been having the exact same issue with mine. How did you get it fixed because I just changed the sockets and bulbs and that didn’t work for me either
@@EnriqueGarcia-hu9ou I repaired mine on an 02 by replacing the circuit board on light housing. took about 30 minutes & cost about $25. just needed a hair dryer, the circuit board & a little silicone
I have a 2009 Jeep Cherokee I want to know how to change out the bulb because it the lights don't work the blinker don't work and the brake lights don't work
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Buy Replacement Taillight sockets: amzn.to/426rJlx
Buy Replacement Bulbs: amzn.to/43lIR7Y
Buy New Taillight and Socket Kit: amzn.to/3IIa7FY
Even 2 years later. This video is on point. Explained very clearly. Thank You.
Glad it was helpful!
WoW ! Can not thank you enough for excellent video. I am retired female. I really needed financially to fix this problem myself. Ordered NEW tail light assembly -right / left side. Got all new bulbs, grease and sockets. LEARNED secrets from your video. Now, to install and I'm pretty handy with this kind of stuff. Hope there will be many 'great returns' to your life for having giving this " helping
hand" to those who watch this.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
This is one of
the most in detail and informative how to videos I have seen anywhere on any topic.... Thanks !
Thanks for watching Steve
Don't forget to like our video and subscribe here: tiny.cc/2zi7ny
Are these sockets interchangeable?
After getting pulled over by Sheriff and warned, I fixed mine for the time being by just removing and reinstalling the same sockets. Connections on this Jeep model get hot and burnt. So also learned how to replace when i can - when i can afford to. Thank you Sir - good video !
Thanks for watching, hope this helps you out
Mine turned out to be a simple bulb replacement so I was lucky! Thank you the great instructions! Highly recommended video for anyone with a brakelight issue.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Nice an thorough, an smart with the greased rubber gaskets. Well done
Thanks for watching
Thank you for this video bro! Very helpful!
Glad it was helpful!
Thanks! Great, simple directions!
Glad it was helpful!
Great job!
Love it!
You safe the day brother !!!
❤❤❤
Thank you for watching our auto repair video that shows you how to replace the taillight bulb sockets on a 1999-2004 Jeep Grand Cherokee.
Thanks for your video, it was a big help
Thanks for watching!
Fix my light in a few minutes!!❤❤❤
Thanks for watching
Thanks for this video man! I have to replace my bulbs too and you made this easy!
Glad it helped
Thankfully, I love you ❤️
Thanks for watching
Thanks. One of the sockets was totally melted into the assembly... I’ll save you the details but I got it working.
Melted sockets are a common problem on these things
Where did you purchase the sockets?
See link in description.
Great video
Glad you enjoyed it
2021 just used this video! Thanx
Thanks for watching
Thanks for the video
Thanks for watching. Don't forget to sub the channel to for more videos like this!
Thank you and Awesome video and taillight is back up and running, quick note if you don’t have the special lube , I used petroleum jelly and it worked fine
Glad this helped you out. Have a great day!
Thanks for sharing. I ordered a complete set of assemblies, sockets, bulbs and grease as you suggested. I am sending your video to my sister so she can see how its done properly they are not mechanically inclined so I assure you that your video will be a big help. Thanks again.
Glad this helped you out. Thanks for watching
There are two locks. 1) is the yellow snap you push to one side. 2) right down in the middle there is a very small tab that you need to lift up... I have a 04 Jeep Cr Cher Limited. They may not all have it but the one I had did have it.
Thanks for the added tip.
Thank you!
You're welcome!
Thanks for posting this. Do each one of the three lights use the same sockets? Or, is it three different ones?
They are the same.
I have tried everything. New bulbs, New sockets, and now whole New taillight casing. But my taillight still doesn't turn on. Brake and signal light works fine. When I turn on headlights at night the taillight on drivers side won't go on. Fuses are fine. It was working a couple of weeks ago. I'm at a loss. I've been stopped by the sheriff twice already. What can it be? How can I fix this? It's driving me nuts. Any thoughts, ideas or suggestions will be appreciated.
Those sockets can be a real pain the butt. Make sure when you twist the socket that they are seated into the circuit board correctly and locked into place. They can be hard to twist all the way in. Hope this helps you out
Buy the LED tail light kit and be done with it.
Super late reply, but I have a similar issue (my right rear brake light doesn't turn on regardless of whether the headlights are on) and with mine it's clearly an issue with the removable wire connector and not the bulbs or the socket. To test it I stuck one of the head rests against the brake pedal and floor mat to complete the circuit then took out the taillight assembly and if I jiggle the connector around the brake light will start to work but it fails again as soon as I drive anywhere. I don't know enough about the light circuits to say whether the your issue could be caused by the same fault but I'm gonna try to take the connector apart tomorrow and if I succeed I'll let you know.
Hey Rose, I’ve been having the exact same issue with mine. How did you get it fixed because I just changed the sockets and bulbs and that didn’t work for me either
@@EnriqueGarcia-hu9ou I repaired mine on an 02 by replacing the circuit board on light housing. took about 30 minutes & cost about $25. just needed a hair dryer, the circuit board & a little silicone
Do i only need a bulb? Or the socket too?
If the socket is not burn't you may be able to just replace the bulbs.
You should always put a link to the parts you bought.
It's terribly difficult to do a Google search for the part isn't it
Will do
I need the harness connector/plug. Loosing contact.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
I have a 2009 Jeep Cherokee I want to know how to change out the bulb because it the lights don't work the blinker don't work and the brake lights don't work
You may want to see if there is power going to the taillight, or if a fuse may be blown. The circuit boards on these Jeeps also go bad.
I can't find the sockets anywhere, they all have wires attached.
Are you trying to buy replacements?
Here you go amzn.to/426rJlx
My 99 jeep grand cherokee has ratchet type screws.
Thanks for watching
How do u unplug it
Sorry just saw this