I am going to first wish you and your lovely family many blessings! and LOL @ dad finding imperfections! Thank you for posting the steps and measurements. very insightful. I will be attempting this with a few varying techniques later this summer. and will definitely send you some pictures of how it turns out! Stay blessed!
@@loraineboyce4573 Thank you for the question. Most videos have some of the measurements and steps in it. The base depends on how high you want it. some like them smaller some a little higher. It's a preference thing. Here are the measurements I am going to follow for mines: Tabletop 34in x 34in 4 - 4 3/4in x 27 3/4in boards with a 3in hole in ea board (leave 1in perimeter around base and use that as a guide) everything else is pretty much preference. you can use a hole bit to drill the hole you want for your beverages and even use some DIY or ebay purchased scrabble tile holders for the domino rests. You can also decopage the center with whatever you want. Enjoy building! Hope this helps!!!!
The inside strips are just for decoration but I just added a design layout with all the measurements on my webpage: familyman.solutions Let me know how it goes...look forward to seeing some of your completed table.
Hi Joseph...the friends I made this table for as a gift place the back of the dominos up against inner trim around the pictures. Hope that made sense. Have a good one.....let me know if you make one!
@@bryansanchez771 but you can't see the full domino that way, specially older folks; they each need to see their own open hand specially if they had a few drinks - lol mind you if they wear bifocals, if they have cataracts, glass eye or new lense on their pupil some can't see see up close. Nonetheless you did a fab job my friend.
Hi Alex...Happy New Year! if you have Instagram I'm @familymansolutions or you can of to my blog familyman.solutions and email me through there. I look forward to seeing it
Sorry for the late reply.....family life has kept me busy busy. In this case my friend wanted to place the domino table table onto of a folding card table.
Great video it has given me an idea to make a domino table for my family. I have a question though. Was the whole table made out of plywood, or did you use other boards as well?
Hey excellent job! Going to try to do one myself. Are the pictures just printouts from the computer or are they photos on photo paper? Again excellent job!!!!!!!!!!!!
If its not level the resin will settle at the lowest point and create an uneven slant when it hardens. Hope I answered your question? Please click subscribe....currently editing other videos. Thanks!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Un gran trabajo pero muy chapucero el acabado de todas formas se esforzó mucho y cumplió el objetivo
I am going to first wish you and your lovely family many blessings! and LOL @ dad finding imperfections! Thank you for posting the steps and measurements. very insightful. I will be attempting this with a few varying techniques later this summer. and will definitely send you some pictures of how it turns out! Stay blessed!
Steven Padilla where can i find the steps and measurements??
@@loraineboyce4573 Thank you for the question. Most videos have some of the measurements and steps in it. The base depends on how high you want it. some like them smaller some a little higher. It's a preference thing. Here are the measurements I am going to follow for mines:
Tabletop 34in x 34in
4 - 4 3/4in x 27 3/4in boards with a 3in hole in ea board (leave 1in perimeter around base and use that as a guide)
everything else is pretty much preference. you can use a hole bit to drill the hole you want for your beverages and even use some DIY or ebay purchased scrabble tile holders for the domino rests. You can also decopage the center with whatever you want.
Enjoy building!
Hope this helps!!!!
Table came out awesome I’m going to try this myself. One question what wood and dimensions was the trim on the inside
thanks for the answer.
do i have to add those strips inside the boards and what are the sizes and measurements?
The inside strips are just for decoration but I just added a design layout with all the measurements on my webpage: familyman.solutions
Let me know how it goes...look forward to seeing some of your completed table.
@@bryansanchez771 I looked on that site and can't find plans for it
What was your total cost for supplies? I want to make one really bad
This is exactly what i want to do, and some how hang it on the wall like an art piece when not in use!!!
Hi I like the video! Can you tell me what kind of glue you use for the picture and where to find the recine thanks!
Great video. I love the work. I have a question. Where would you place the dominoes?
Hi Joseph...the friends I made this table for as a gift place the back of the dominos up against inner trim around the pictures. Hope that made sense. Have a good one.....let me know if you make one!
+Family Man Solutions awesome. thanks.
@@bryansanchez771 but you can't see the full domino that way, specially older folks; they each need to see their own open hand specially if they had a few drinks - lol mind you if they wear bifocals, if they have cataracts, glass eye or new lense on their pupil some can't see see up close. Nonetheless you did a fab job my friend.
Thank you for the idea! I did it, then someone did an awesome air brush art where you put the photos and finally today I did the resin
Alex, I would love to see your work! The resin is pretty cool.
Family Man Solutions How can i send you some pics?
Hi Alex...Happy New Year! if you have Instagram I'm @familymansolutions or you can of to my blog familyman.solutions and email me through there. I look forward to seeing it
How has it held up since than?
Sorry for the late reply.....family life has kept me busy busy. In this case my friend wanted to place the domino table table onto of a folding card table.
Family Man Solutions I'm gonna do one soon
Family Man Solutions do you know how it would look now with all the shuffling and slamming of the dominoes? Does it stay nice and shiny?
Which resin did you use, the video does not show much to fast...lol
Nice work. What are the thickness of the woods? Thanks.
What brand resin did you use?
I like the Cuban pics. Where did you get them?
Great video it has given me an idea to make a domino table for my family. I have a question though. Was the whole table made out of plywood, or did you use other boards as well?
I just used plywood with a smooth finish. The only other wood was the trim. Let me know how it goes!
Can you tell me the materials that you used and were to get them please ?
That economics book can be used as a weapon.
La pega q utilizas pars pegar el papel donde la consigo y como se llama?
Hi I was wondering when you print the pictures you print it in regular paper or photo paper?
What type of wood did you use?
How can I get the Material list and
a design layout with all the measurements please
I searched your sight but no luck
Does anyone know how to clean up scratches?
Good job!
How much resin did you used?
Robert, so sorry for the late response. It slipped by. I used 2 kits to complete the project.
Family Man Solutions already made one but instead of resin I used felt.
Me gustaría hacerla pero me gustaría que fuese explicado. No solo con imágenes ilustradas pues no entiendo mucho pero me gusto
Hey excellent job! Going to try to do one myself. Are the pictures just printouts from the computer or are they photos on photo paper? Again excellent job!!!!!!!!!!!!
Juan...I do hope you try it out. The pictures were printed on regular paper. Send some pictures you get a chance!
Ok I will. I am going to try to do is add foldable legs to mine.
Foldable legs = smart idea
bien chevere y al Señor ''El que sabe sabe'' :)
This is bad ass I love this
Great job, thanks.
like just the for E X T R A T H I C K N E S S at 2:29
what if its not leveled before pouring risen
If its not level the resin will settle at the lowest point and create an uneven slant when it hardens. Hope I answered your question? Please click subscribe....currently editing other videos. Thanks!
You talked too fast during the video; I couldn't understand a word. 😜
You noticed....lol. Thank you for watching and your comment!
When someone speaks fast one should listen quickly. Problem solved. 😀
I want one