@@BatoceraNation Saludos amigo sabes a Hago todo el procedimiento pero no cuando conecto la pantalla de 50 pulgadas no seve solo se escucha y en la pantalla de la laptop si seve si sabes cómo ayudar me te lo agradecería mucho
So I installed BAT 34 on an old laptop PC, everything works good, but for some reason the intro splash screen plays on the laptop screen and not out to HDMI to my TV. Once the splash screen finishes, everything goes to the TV without a problem. Any ideas?
Is it just me or is the video blank from about 16:28 to 17:38? Also, I usually use a program called diskgenius to access hidden partitons/files. However on this occassion I dont think its possible to do whats needed for the splash video tutorial. Also cant seem to locate other files with it, like certain cfg files and retroarch cores 🤔 Anyway, guess Ill have to do this one over network.. 🙄
@@BatoceraNation Ok, I was able to swap out the default one thanks to your vid, doing it using winscp way. But when it came to saving via using terminal it was hard to see what you typed in even on my TV cause of the resolution. So I typed in batocera save overlay only to find out on google its batocera-save-overlay. New to that so. Btw, I chose the video Batocera Wave Retro 01. Incase you were wondering.
First of all, thank you for your videos. They help a lot. I ran Batocera on a Win 10 PC from an SSD. Everything works great, except for the splash screen. I can't get that going. Did everything exactly as you described it. What am I doing wrong. Sorry for my English, I'm from Germany and wrote this through the Google Translater. Thank you for your answer.
@@BatoceraNation Yes I have sound in the games. As I said, Batocera and the emulators run great. The game videos are also running and with sound. Only from the beginning no splash videos, not even the standard video. I start Batocera from an external SSD. Everything is going great thanks to your videos, I just can't get these damn splash videos to work. I haven't used your special file yet. Oh and thank you for your quick help.
@@lavedavis3968 It might be that your SSD is loading everything really fast. So, turn to that special file that I mentioned in the video and manually turn it on. That should do the trick.
@@BatoceraNation So I did everything again step by step and also changed the config, but the splash video doesn't work. Could it be due to an attitude in the bios? I really don't know what it could be. I've been racking my brain for days now. Thanks again for your support, otherwise I would pull my hair out here :-).
I can enjoy Batocera thanks to you. Thank you for making these videos. By the way, what is that blue/orange splash screen at the start of the video called?
Hi! Nice chanel, I subscribed already. Have a question, I want to change the Splash Boot picture from a Batocera Image created by other person but with this tricks I can not do it. Do you have any idea why? Thank you so much.
@@BatoceraNation thank you for answering. I'm using an .PNG picture and it appears for just a second on the screen after that the splash picture from the image owner appears also with a progress bar. I already setup the config file for the picture to stay longer but it doesn't work either.
@@cristianluna6016 I haven't really played with the image splash screen. I've only played with the splash videos. You might have to ask that question on the Batocera.org forums.
My boot video in Batocera is always very slow, sometimes it even stucks and you cannot boot (custom as standard video). I‘ve heard it has something to do with 4K TVs (I have one). Is there a solution to play it normal?
Thank you for the videos! One question. After my splash video runs I still get a brief batocera startup screen. I followed the wiki, but no mater what I do that screen still seams to stay. Any ideas on how to remove it? Thanks!
Hi I love your video thank you so much for showing us so much. What hardware would you actually recommend for Batocera. At the moment I have an old Dell PC Optiplex 9010 to test. Is the hardware sufficient for most emulators or should I get an RP4 or Odroid.
Tell me the specs of your PC including the Intel chip it uses. Emulation will 90% of the times work better on a PC instead of the other gadgets out there.
Easier to do from v33 now. No need to edit any cfg file. Just put your vid in the splash folder, goto system settings/splash setting and select default video user set splash. Or if you want your video but silent select silent video user set splash. And select Batocera splash image if you wanna use Batocera image only no video. If you wanna use Batocera default splash video again you would have to delete your vid in the splash folder I presume.
@@BatoceraNation can you make this tutorial please?, because I have connection issue on my laptop, my batocera version is V34, it's so hard to do tutorial in your video without wifi/local connection 🙏
I hope the developer can find a fix for technoparrot that would be great suppose we have to keep our fingers crossed and see what happens.your vid is not all bad.
I liked the video in 31 where it had Mario and Knight Arthur from the Ghosts 'n' Goblins and Ghouls 'n' Ghosts video games I think maybe it also had Peter Pepper from Burger Time and a few others.
Hi BN I love your videos it helped me and a lot of people in tweaking and tinkering with batocera so thanks for that.. BTW I have a question regarding this.. I'm using the same PC to run batocera via usb flash drive.. is it possible to change splash without using samba share (SSH).. thanks in advance..
Much easier to do from v33 now. No need to edit any cfg file. Just put your vid in the splash folder, goto system settings/splash setting and select default video user set splash. Or if you want your video but silent select silent video user set splash. And select Batocera splash image if you wanna use Batocera image only no video. If you wanna use Batocera default splash video again you would have to delete your vid in the splash folder I presume.
hi, thanks for your videos. I translate them into Italian to better understand the Batocera world. Thank you. I have a question: I did many tests: I copied one of my videos and one of my images in the /usr/share/batocera/splash directory and in the /userdata/splash directory. Okay. I deleted the videos that were there by default. I restarted the batocera system. But I find again the video files that I had deleted!! Why? I can't figure out why the default files are resurrected!! help me
Can this all be done on a single PC running batocera on an internal hard drive as well as the windows instal on another internal hard drive or are two separate PC's required I am confused
When you create a bootable Batocera image on a SSD, thumb drive, or hard drive, your PC will bypass Windows and load up Batocera instead. When you remove your Bstocera drive from you PC at the next boot, Windows will automatically load.
How i can do all this when i have installed the batocera in internal Hard drive with dual boot enabled ?? i try it with that software but i take error message Network error : Connection to ............refused
I'm stuck on this one. You might want to post your problem on the official batocera.org forums for a solution. Someone there might know the answer to your question.
@@BatoceraNation Goon morning from Greece ..... i solve my problem by doing all your steps one by one direct inside from batocera system - folder by folder !!! Thanks a lot for your amazing videos !!!
I got a problem. No matter what resolution my splash videos are, they always get blown up on my TV to 4k (I have Batocera at 1080p). How do you keep the splash videos in the lower resolution?
Hi! Im having a problem, i run raspberry pi 4, v31 beta Batocera, in the config it says nothing about splashscreen, but there is a intro video in the folders, so i copied a another video replacing that video and saved with command in your video, but the original intro video is still loading? It says in the folder that the video file i copy in mp4 will be copied to boot/splash but it dont Even when i save with command. Yes its v31 but there is video intro and splash folders so it should work?
@@BatoceraNation The Galic reason. The best by performance system. Easy, but advanced. Franceux, you are the best. I’m Russian, the most performance system ever created. Le meilleur système sur tout le continent.
I never regretted installing batocera.
Best collection of Batocera tutorials man ! love it !
Thanks!! Great to hear!
@@BatoceraNation
Saludos amigo sabes a
Hago todo el procedimiento pero no cuando conecto la pantalla de 50 pulgadas no seve solo se escucha y en la pantalla de la laptop si seve si sabes cómo ayudar me te lo agradecería mucho
Best batocera tutorials ever 😍😋😋
Thanks!
So I installed BAT 34 on an old laptop PC, everything works good, but for some reason the intro splash screen plays on the laptop screen and not out to HDMI to my TV. Once the splash screen finishes, everything goes to the TV without a problem. Any ideas?
I miss the default splash vid that was on batocera 31, it was cool. Is there a way to get that anywhere?
Give me 24 hours and I will have it on my website in the Downloads section.
@@BatoceraNation cmon really?? Dude, who is better than you?? Thank you so much.
It is already up and ready for download.
@@BatoceraNation You are the best! Thank you.
Is it just me or is the video blank from about 16:28 to 17:38?
Also, I usually use a program called diskgenius to access hidden partitons/files.
However on this occassion I dont think its possible to do whats needed for the splash video tutorial.
Also cant seem to locate other files with it, like certain cfg files and retroarch cores 🤔
Anyway, guess Ill have to do this one over network.. 🙄
I just saw that. It is blank. It's a mistake. Sorry.
@@BatoceraNation
Ok, I was able to swap out the default one thanks to your vid, doing it using winscp way.
But when it came to saving via using terminal it was hard to see what you typed in even on my TV cause of the resolution.
So I typed in batocera save overlay only to find out on google its batocera-save-overlay.
New to that so.
Btw, I chose the video Batocera Wave Retro 01.
Incase you were wondering.
Loving the tutorials Thank you
What software did you use to make your splash screens?
I used a website where I created my logos and artwork for Batocera Nation channel and website. It is a paid website.
@@BatoceraNation what is the website?
Thank you for the video, is there a way to change the picture of the loading screen? The one after the video
Another great video, thank you.
Hello, when i start Baocera, theres the current date on screen on my splash video, how do i remove that?
Your page batocera nation is down.
I upload the video and saved it but its giving me a resync error 11. Any help?
First of all, thank you for your videos. They help a lot. I ran Batocera on a Win 10 PC from an SSD. Everything works great, except for the splash screen. I can't get that going. Did everything exactly as you described it. What am I doing wrong. Sorry for my English, I'm from Germany and wrote this through the Google Translater. Thank you for your answer.
Do you have sound when you play your games? Did you load up that special file that I mentioned in the video and turn on the sound from there?
@@BatoceraNation Yes I have sound in the games. As I said, Batocera and the emulators run great. The game videos are also running and with sound. Only from the beginning no splash videos, not even the standard video. I start Batocera from an external SSD. Everything is going great thanks to your videos, I just can't get these damn splash videos to work. I haven't used your special file yet. Oh and thank you for your quick help.
@@lavedavis3968 It might be that your SSD is loading everything really fast. So, turn to that special file that I mentioned in the video and manually turn it on. That should do the trick.
@@BatoceraNation So I did everything again step by step and also changed the config, but the splash video doesn't work. Could it be due to an attitude in the bios? I really don't know what it could be. I've been racking my brain for days now. Thanks again for your support, otherwise I would pull my hair out here :-).
@@lavedavis3968 I'm stumped too. You might have someone who would know the answer to your problem at the forums at Batocera.org.
I can enjoy Batocera thanks to you. Thank you for making these videos. By the way, what is that blue/orange splash screen at the start of the video called?
BATOCERA Digital #03 by Snakervill
You can find it here: batocera.org/videos/boot/
Hi! Nice chanel, I subscribed already. Have a question, I want to change the Splash Boot picture from a Batocera Image created by other person but with this tricks I can not do it. Do you have any idea why? Thank you so much.
Is it in the MP4 format? What exactly is happening when you try it? Where does it go wrong?
@@BatoceraNation thank you for answering. I'm using an .PNG picture and it appears for just a second on the screen after that the splash picture from the image owner appears also with a progress bar. I already setup the config file for the picture to stay longer but it doesn't work either.
@@cristianluna6016 I haven't really played with the image splash screen. I've only played with the splash videos. You might have to ask that question on the Batocera.org forums.
@@BatoceraNation I will check their forum. I also tried with a video and nothing happened. Thank you so much.
My boot video in Batocera is always very slow, sometimes it even stucks and you cannot boot (custom as standard video). I‘ve heard it has something to do with 4K TVs (I have one). Is there a solution to play it normal?
Thank you for the videos! One question. After my splash video runs I still get a brief batocera startup screen. I followed the wiki, but no mater what I do that screen still seams to stay. Any ideas on how to remove it? Thanks!
The main Batocera screen will flash no matter what.
Can somebody help me? I put batocera save overlay just like the video but its giving me a resync error and its not saving. Highly frustrated
I'm looking for the splash video that came as the default (I think) in version 29, I really like it and want it back. Please advise
It might be V31's Splash Video. You can download it here: www.batoceranation.com/downloads/
@@BatoceraNation i think that's it!!! Thanks!
Hi I love your video thank you so much for showing us so much.
What hardware would you actually recommend for Batocera.
At the moment I have an old Dell PC Optiplex 9010 to test.
Is the hardware sufficient for most emulators or should I get an RP4 or Odroid.
Tell me the specs of your PC including the Intel chip it uses. Emulation will 90% of the times work better on a PC instead of the other gadgets out there.
Easier to do from v33 now.
No need to edit any cfg file.
Just put your vid in the splash folder, goto system settings/splash setting and select default video user set splash.
Or if you want your video but silent select silent video user set splash.
And select Batocera splash image if you wanna use Batocera image only no video.
If you wanna use Batocera default splash video again you would have to delete your vid in the splash folder I presume.
Yes, it is much easier and flexible now.
@@BatoceraNation
Suggestion:
Maybe pin the comment?
@@BatoceraNation can you make this tutorial please?, because I have connection issue on my laptop, my batocera version is V34, it's so hard to do tutorial in your video without wifi/local connection 🙏
I hope the developer can find a fix for technoparrot that would be great suppose we have to keep our fingers crossed and see what happens.your vid is not all bad.
I liked the video in 31 where it had Mario and Knight Arthur from the Ghosts 'n' Goblins and Ghouls 'n' Ghosts video games I think maybe it also had Peter Pepper from Burger Time and a few others.
You can find the splash video for Batocera 31 at our website on our Downloads section.
Hi BN I love your videos it helped me and a lot of people in tweaking and tinkering with batocera so thanks for that.. BTW I have a question regarding this.. I'm using the same PC to run batocera via usb flash drive.. is it possible to change splash without using samba share (SSH).. thanks in advance..
Much easier to do from v33 now.
No need to edit any cfg file.
Just put your vid in the splash folder, goto system settings/splash setting and select default video user set splash.
Or if you want your video but silent select silent video user set splash.
And select Batocera splash image if you wanna use Batocera image only no video.
If you wanna use Batocera default splash video again you would have to delete your vid in the splash folder I presume.
hi, thanks for your videos.
I translate them into Italian to better understand the Batocera world. Thank you.
I have a question:
I did many tests: I copied one of my videos and one of my images in the /usr/share/batocera/splash directory and in the /userdata/splash directory.
Okay.
I deleted the videos that were there by default.
I restarted the batocera system.
But I find again the video files that I had deleted!!
Why?
I can't figure out why the default files are resurrected!!
help me
Can this all be done on a single PC running batocera on an internal hard drive as well as the windows instal on another internal hard drive or are two separate PC's required I am confused
When you create a bootable Batocera image on a SSD, thumb drive, or hard drive, your PC will bypass Windows and load up Batocera instead. When you remove your Bstocera drive from you PC at the next boot, Windows will automatically load.
Isn't there an option in 31 and 32 to set the boot splash to on silent or no splash? I know for sure there is in 32 because I set it to No Splash.
In Ver 32 yes, but not in Ver 31. You would have to go to the batocera.config file that I discussed in the video and turn it off from there.
How i can do all this when i have installed the batocera in internal Hard drive with dual boot enabled ?? i try it with that software but i take error message Network error : Connection to ............refused
I'm stuck on this one. You might want to post your problem on the official batocera.org forums for a solution. Someone there might know the answer to your question.
@@BatoceraNation Goon morning from Greece ..... i solve my problem by doing all your steps one by one direct inside from batocera system - folder by folder !!! Thanks a lot for your amazing videos !!!
@@ΘεοδωροςΖωης-β7σ Good morning to my Greek Batoceran! Glad that you solved it!
@@BatoceraNation Thanks my friend !
Thx!
I got a problem. No matter what resolution my splash videos are, they always get blown up on my TV to 4k (I have Batocera at 1080p). How do you keep the splash videos in the lower resolution?
Did you check that file that I mentioned in the video? Check to see if there's a setting for something that says resolution and set it to 1080P.
@@BatoceraNation batocera.conf? Nothing about splash screen resolutions.
Let me take a look tomorrow.
@@BatoceraNation Thanks, I'd appreciate you.
Do you know why splash videos are super slow on 4K tv's ? I setup batocera today and its unplayable.
What are the specs of your Batocera system? Does it play well on a smaller screen?
@@BatoceraNation Mini PC GK3V Intel J4125 commonly used in batocera builds. got this because I saw someone else on YT with the same mini pc.
It is a slower chip and trying to play a video in 4K while trying to load everything up at the same time may be too much for the chip.
@@BatoceraNation how is it that it works for others? look up retrostation pc
Is it playing at 4K? It could be playing at 1080p. Show me the link?
Hi! Im having a problem, i run raspberry pi 4, v31 beta Batocera, in the config it says nothing about splashscreen, but there is a intro video in the folders, so i copied a another video replacing that video and saved with command in your video, but the original intro video is still loading? It says in the folder that the video file i copy in mp4 will be copied to boot/splash but it dont Even when i save with command. Yes its v31 but there is video intro and splash folders so it should work?
Try renaming the new splash video with the same file name as the original splash video.
nice video
FYI: Rules have changed. All you have to do now is to download the video(s) and dump them into the share/splash folder - that's all !!
Yeah, newer Batocera version has enabled this.
He does have a newer video covering this too.
I tried and didnt work
Working on lagecy BIOS not working on UEFI BIOS 😭
Please help 🥺
Some systems bios let you change it from Legacy to the other one or vice-versa. Look for it. If none exists, then there's nothing that we can do.
Is there a faster way to do this? Seems like so much work for just moving files into a folder in Batocera. Also, your volume is way too low
All you really need to do is to copy your splash videos to the splash folder.
I will raise the volume to my videos.
Im trying to get a playstation splash boot if someone could help me find one. Prefer ps3 or 4
winscp gives me connection refused
Is your IP address correct?
Have you seen this video: ruclips.net/video/KOGMWtGSlwA/видео.html
@@BatoceraNation watching now
@@BatoceraNation yes
@@BatoceraNation lol i didnt relieze it was a file transfer over the net my system is running all in one have to shutdown batocera to use windows
Where are Snakersvill videos? Are there capitalistic copyright issues, LGBT/BLM conflict? What has happened?
In the video, I clearly mention where they are located. Secondly, I provided a direct link in the video description.
Merci beaucoup, je n'étais qu'un troll sympathique. Batocera - hors de la politique ;)
Oui, Batocera - hors de la politique.
@@BatoceraNation The Galic reason. The best by performance system. Easy, but advanced. Franceux, you are the best. I’m Russian, the most performance system ever created. Le meilleur système sur tout le continent.
I'm installing windows 11 today