Perfect sound: DSP tuning with Mosconi - Part 5 - AutoEQ / USB Interface / Summary
HTML-код
- Опубликовано: 17 окт 2024
- ** English subtitles available **
** English description below **
Timestamps:
1:00 USB Interface einrichten.
3:35 Erste Messung - ein Klick.
6:00 Laufzeit-Messung USB.
10:50 Phase einmessen USB.
16:40 Moden und Interferenzen messen.
17:30 AutoEQ.
25:50 automatisch nachjustieren.
GUI 3.40 official release:
www.gladen.com...
DSP automatisch einstellen - funktioniert das wirklich?
Alle Messungen jetzt auch mit USB Audio Interface möglich.
Optimierte Abläufe.
AutoEQ
Zusammenfassung aller Möglichkeiten
Timestamps:
1:00 Set up USB interface.
3:35 First measurement - one click.
6:00 Running time measurement USB.
10:50 Calibrate phase USB.
16:40 Measure modes and interference.
17:30 AutoEQ.
25:50 Automatic readjustment.
Setting DSP automatically - does it really work?
All measurements now also possible with USB audio interface.
Optimised processes.
AutoEQ
Summary of all possibilities
#DSP #tuning #Mosconi
Man kann nicht oft genug Danke sagen das ihr die Carhifi-Welt verbessert! Phenomenal was in so kurzer Zeit geniales aus dem Messsystem geworden ist! Auch das immer wieder auf die Wünsche des noch so kleinen Mannes eingegangen wird. Danke, Danke, Danke!
Btw. würde ich wenn möglich die Kalibrierung für die OKM nehmen ;)
Andersrum wird ein Schuh draus: Ohne Input und Feedback ist es schwierig besser zu werden.
Daher - auch ganz speziell an Dich - herzlichen Dank für den Input.
Keine Falsche Bescheidenheit, am Anfang muss doch immer der Herrsteller mit einem offenen Ohr und dem Willen stehen :)
Wie immer ein super Video, die Software wird immer genialer.
Eine Anmerkung : Ist es in einem 3 Wege System nicht der Mitteltöner, der hauptsächlich den Klang ausmacht? Meiner geht von 300Hz bis gut 4kHz, was doch mMn der wichtigste Bereich ist oder nicht?
Boah wie geil ist das denn bitte. Ihr habt tatsächlich mein Feedback und den Wunsch USB-Mikrofone nutzen zu können umgesetzt…. Daumen hoch 👍
Sehr gerne - viel Spaß beim testen ;-)
Morgen werde ich mir eine lange Session am Auto geben, da freue mich schon drauf.
Die GUI von euch ist beinahe perfekt. Wenn irgendwann noch die Kalibrierungsfiles der USB-Mikrofone (z. B. Umik 1) eingelesen werden können, dann ist das ganz großes Kino.
Vielen Dank für die geniale Weiterentwicklung.
Import für diverse Korrekturen und REW sind in Arbeit.
@@GLADENMOSCONI Ihr seid der Wahnsinn
@@GLADENMOSCONI Steckt da so viel Magic drin, oder kannst du den erforderlichen Aufbau der Datei hier posten? Ich glaube die ganzen Enthusiasten hier sind in der Lage ihr File zu konvertieren und sitzen hier auf heißen Kohlen :)
Ich bin wirklich baff, was ihr da wieder alles Neues rein gepackt habt. RESPEKT!!! ❤❤❤
Freue mich schon auf das damit rum spielen 😉👍👍
Du bist auch überall 😀
@@audio_and_diy sagt der Richtige 😂😂😂
Ich bin jedesmal aufs neue begeistert was ihr bei Gladen Mosconi zaubert. Ich stehe schon in den Startlöchern und bin sehr motiviert und gespannt auf News von euch 😁
Danke vielmals für die AS DSP's und dass ihr mega bemüht seid das beste aus den Geräten raus zu holen. Ich bin großer Fan von den Dingern ❤
Vielen Dank für das Feedback. Lange musst Du nicht mehr warten - 3.41 ist kurz vor dem Release. Auto-Filter und viele kleine Optimierungen kommen dazu.....
Hallo Frank,du sagtest,beim 3 Wege plus SUB macht es Sinn,für die Phasenmessung den HT stehe zu lassen,da dieser den größten Einfluss auf das Musik geschehen hat.. Ist der MT nicht besser? Habe das jetzt so verstanden,dass jedes Paar Lautsprecher dann an die feste Größe angepasst wird.. Wie schaut das aus mit Links - Rechts? Sind dort die Unterschiede vernachlässigbar?
Ha, erwischt - ein Versprecher.
Bei 3-Wege bleibt der Mitteltöner stehen. Erst Hochtöner, dann Tieftöner an den Mitteltöner angleichen. Zum Schluss Subwoofer an den Tieftöner.
Links / Rechts relativ ist zu vernachlässigen, das ist bei korrekt eingestellter Laufzeit nahezu identisch.
@@GLADENMOSCONI lol, hat sich ja meine Frage oben erledigt....
Hallo, welches würden Sie als Alternative zum Original-Mikrofon von Mosconi empfehlen?
Ich habe mal eine Frage... Ist es bei dir auch so wenn du die soundman okm 2 mit der Rode ai Micro Laufen lässt das der Rechte Kanal viel lauter ist als der Linke ? Ich habe bei mir einen unterschied von 10 - 15 dB
Absolutely Amazing Frank!!! Aersospace will be going into my system!!!
Super, rechtzeitig zu Ostern😊 Jetzt werden wir das ausprobieren 👍
Hi Frank, When using Barnie, is it better using RODE or the sound card connect to the usb?
Das ist Endg....! Wow, ich hätte nicht gedacht dass sowas möglich ist. Danke!
Frank wo bekommt man den virtuellen Kopf? Oder ist es angedacht, dass die Person mit Ohrstöpsel misst?
Unsere kalibrierte Ausführung nur beim Gladen / Mosconi Fachhändler. Einige ambitionierte User bauen aber schon erfolgreich nach.
Unterschiede gibt es am Ende beim Frequenzgang, alle anderen Messungen können mit fast jedem Kunst- oder Echtkopf-Mikrofon zuverlässig gemacht werden.
Mahlzeit Frank! Mag sein, daß ich es übersehen oder nicht verstanden habe, aber welche Eurer DSP-Endstufen unterstützen denn diese Funktionen des neuen GUI?
Hallo,
alle DSP auf aktueller Plattform: 8to12AS/6to8AS, alle Pico, neue ONE-Serie und Atomo.
Du kannst die GUI runterladen und starten, dann bekommst Du sofort einen Überblick mit Beschreibungen.
@@GLADENMOSCONI Super! Vielen Dank für die schnelle Antwort!
Alt M to activate it
Hi great video, even in subtitles :) I'm not sure how to load my USB microphone calibration file? I see an option to load a mic calibration but its fixed on a file type *.MCL . My mic (UMIK-1) came with a calibration file in *.txt and *.frd file types. Appreciate your advice how to resolve?
Import for different calibration files is in progress....
@@GLADENMOSCONI Thanks for the quick reply. If you are able, it would be great to know if this is a short term fix (eg in a few weeks) or something that will likely come later? Thanks again
Tell me which microphone is better to buy for RODE AI MICRO
Great improvement! If I have 3 way front active with sub woofer and I would like to set phase for the rear speaker, I also use midrange as the reference? Rear speakers are full range, thanks
You first make your front system + subwoofer complete.
So: Midrange speaker is reference. Shift tweeter, shift woofer, shift subwoofer to woofer.
Then shift the rear system to the subwoofer.
Hi Frank and thanks to share your knowledge.
I have noticed that if you use the easy setup for the speakers configuration the crossover is not implemented whit the left side filter ( the 2 that you can easy turn off)
... give me a week time and hold my beer ;-)
Great Feature thanks..... But the only con measuring with usb card you can't measure the input signal....
I have read on Facebook that you are planing to give out a calibration file for the OKM??
You can easily switch to "direct DSP" measurement - to measure the input signals. USB measurement is only an optional feature.
We have a correction for OKM2, send us a mail....
@@GLADENMOSCONI Ahhhh i understand. I will send mail. Next week I will become my new car (Kia Sportage 2023) So it will be a challenge to get the input signal right I guess. I have asked some mosconi dealers for the Canbus module but here in the Netherlands the two dealers
I have asked didn't knew about such thing.
I believe it's not a diy thing?? Although I know where the canbus wires comes in by the radio??
I will send a mail for the OKM2 calibration files. Thanks!!
Is the KIA with sound system or standard stereo?
In fact, CAN-Open is not a DIY product because it is very support intensive. Only a few dealers in the Netherlands have it in their range so far.
How far do you have to go to Cologne?
We have plug & play wiring harnesses for Hyundai and KIA (with and without sound system), also with CAN tap.
@@GLADENMOSCONI I have a non Harman Carton system 😜🤣. I Live 2 and half hours driving from. Köln so that's not far.
I already buy a Car2iso adapter for Kia. So I can wire up the speakers into the Pico DSP.
Already thought about to De-eq the system on a specific volume on the headunit. And control the volume with a RC mini??
Best is to have a Canbus device of course...
@@GLADENMOSCONI I have send an E-Mail but never received an answer for the OKM calibration file.
Hi Frank. I have such a request, please add the ability to load equalizer settings from a txt file (rew). Thank you
In progress.....
@@GLADENMOSCONI super, thanks
Bräuchte mal Hilfe, sitze gerade am Messen: Alles auf der rechten seite sagt er No Signal oder zuviel Rauschen. Aber die Lautsprecher funktionieren ja. Woran kanns Liegen?
Hallo,
was zeigen denn die VU-Meter beim messen an? Kommt rechts ähnlich viel Pegel wie links?
@@GLADENMOSCONI ja, tut es
@@GLADENMOSCONI ich habe jetzt folgendes festgestellt:
Benutze ich das Rode ai Micro Mit dem OKM 2 ist der rechte Kanal zu leise. Das ist sowohl am Smartphone als auch beim Aufnehmen auf dem Laptop.
Stecke ich das OKM mk2 direkt in den Laptop dann kann ich ganz normal messen. Beim Aufnehmen sind auch beide Seiten gleich laut ( Mit dem Rode ai Micro hört sich die rechte Seite stumpf an). Mit meinen Zoom H2n Recorder sind ebenfalls beide Kanäle gleichlaut ( angeschlossen und getestet).
Ich habe zum Vergleich spontan das Sound Blaster G3 gekauft und da sind die beiden Kanäle gleichlaut, und die Zeitmessung funktioniert auch.
Jetzt ist die große Frage an dich: Kann ich beim Soundblaster G3 bleiben oder soll ich das Rode ai Micro umtauschen und es erneut versuchen? (Falls es da qualitativ Unterschiede gibt beim DAC der beiden Geräte).
Qualitativ spricht nichts gegen den G3. Aus der Anleitung kann ich auf die schnelle aber nicht herauslesen ob er einen Stereo Mic-Eingang unterstützt.
Wenn dem so ist: Gerne benutzen....
@@GLADENMOSCONI das einmessen hat funktioniert, jedoch kam heute ein neues update für die 8/10. Das ging beim Upload schief. Seitdem ist die endstufe tot, laptop kann auch keine Verbindung aufbauen. StatusLED leuchtet 8x und dann 1x und dann leuchtet die FLT Lampe Dauerhaft Rot. Kann man sie wieder in gang bringen?
Sollte nicht ein Video kommen, in der ihr ein SoundUp BMW System einmest?
Don´t push - wenn wir sagen wir machen das, dann machen wir das..... muss man nicht alle 6 Monate dran erinnern ;-)
Wird kommen....
Stellen Sie sicher, dass das Mikrofon für RODE AI micro geeignet ist.
does this update will work on mosconi atomo 4/6?
Yes. Download and connect. The GUI will update your Atomo DSP
Which mic do you suggest to use with Rode other than BARNIE
We also have good results with Soundman OKM2. We also have a generic correction for this.
However, the feedback shows that there are considerable differences in sensitivity and frequency response.
We are also testing Sennheiser On Ear microphones - stay tuned.
I also can confirm that results with OKM II are way better than with Umik, after using both a while.
@@kirillastapov5797 Which OKM2 are you using, Classic or Studio?
@@ytnimal you can use both, the Studio is matched left to right in sensivity. i use the studio
@@kirillastapov5797 unfortunately i don't have good results with the OKM classic II, especially the RTA measurements are way off, even with calibration (Frank made the calibration based on my OKM classic II that i sent to him for testing and yes, Frank already knows about my problems with the OKMs). Could be just my OKMs though, i don't know. Spectral balance is way better with the RTA done with a UMIK-1 in my car, therefor i do this still with the UMIK-1 for the time being.
Time alignment, modes and phase are very very good though. Will test the Sennheiser Ambeo headset with the binaural mics next i think. ;)
Und das ist noch nicht alles, was Sie tun müssen, um die Schaltfläche „measure“ anzuzeigen. Mosconi 8|10 DSP soft 5.2
Alt M
English please 😢
In progress - next week.