Go with digital servo, Sanwa, ReveD, Yokomo or Futaba servo and brushless servo is great but this VDO run with coreless servo and you can check all spec in description ruclips.net/video/z4didhCIY8M/видео.html
I wish MST made a touring car chassis with this layout, front motor RWD with a open diff or 4WD via a transferase. I'm big on front motor r/c cars since it's more scale and realistic to it's 1:1 clone.
@@RaceInPeaceisHere I have noticed for some parts you lubricate them before screwing them in, like ball ends. Is this to install and maybe remove them for a different setup later easier?
@@RaceInPeaceisHere great tip, thank you! I wish I had known this before assembling my MST CMX tie rods. My hand still hurts a week later.. 😂😂😂 Any partivular oil you prefer using or whichever shock or diff oil the kit comes with works?
@@YoShImUrA53 that is ball bearing oil and the great tool that can help you spin it is 3Racing, comes with all sakura d4/5 kit, you can see them in my d5 assemble vdo but im not sure about the factory will split them for sell or if you have friend who running with sakura, borrow him haha
Having difficulty time with pinion gear and gear A meshing. My pinion gear is 23t and using the 28t for the gear A. Can't even spin when I use my finger. Help!
hello !, try to slalom practice like this Vdo first ruclips.net/video/geYmaY8zjE8/видео.html and then you must to find another motor turn, in this clip Im using 13.5T but I think 17.5 or 21.5 will be give you more torque at first to middle trigger rate, wish you have fun with this chassis I will buy one for me too, this one is not mine :D
Thank you so much. I actually own a MST RMX 2.0. I love it! I upgraded just the esc and motor to 10.5t. I using a futaba 3pv. And this MST FXX, 13.5 t. With the link you sent me above I read his description. I understand now with the 48 pitch 😁. Aloha 🤙from Hawaii.
@@MrFatpig47 which one do you like better? Rmx or fxx? Can you describe the driving differences? What surface are you usually on with them? Thank you in advance
@@basquiattv2458 I couldn't figure it out. So, I didn't use it. As far as I can tell it doesn't affect the performance of the chassis or any gyro much. But, it would've been nice to use everything in the kit for looks.
I can not decide which one to buy. Out of the RMX, RRX, and FXX, what would you recommend? Or would you suggest another kit? Love the video, truly great work.
Hi, try to check in uploaded playlist, I have full building of FMX chassis too, RMX 2.0 S or RMX 2.0 RTR are good for start, RRX is advancing in chassis setting if you need to go with more speed while running, FXX is my favorite, this one is harder to setting more than another but full style of real car movement when you run.
I think this is not better or bad more than RMX but both chassis have different drifting style, momentum of FXX front motor more closer to the real car while drifting and RMX / RRX / D5 /YD-2 / Galm 2 got styling of RC car, weight balance move to the rear for compensation of traction and you can check FMX in my playlist too, FMX super fast for transition because weight balance is in the middle
RMX = motor stay in front tower shock RRX = rear motor and FXX = front motor position with shaft driven, FMX = middle motor position with shaft driven, you can check FMX assemble and test run VDO in my playlist ^^
For me is over 10 hahaha, I have one in the box too but not assemble mine yet, this vdo is my friend kits :3 if you check in my mst fxx 2.0 s playlist you will see all of the process in electronic or fixing some for make her running too
its amazing how so much work could be put into making a video and yet have the video be so useless and for anyone wanting to learn more about the front motor rwd setup knowledge is very limited included never actually showing the chassis with a motor installed, so i still don't know exactly how it works, if you are looking to learn stuff this video isn't the place....
@bhdproduction2007 RMX is good for play or battle but FXX, FMX have great characteristic while driving like a real drift car so, one day may be you get what I try to said :D
@@RaceInPeaceisHere i understand what you're saying. I drift irl and AC. I have fanatec and simucube. All I'm saying is the plastic on fxx for the chassis is not great. It flexes too much. You can make any RC drift move and have visual suspension realism like a real car. You just need to change the springs and add no shock oil. But thanks man for the video. Keep making more vids.
@bhdproduction2007 I mean the main shaft, why fxx plate have less flex because if much flex, all of plastic gear attaching near motor will destroyed while motor moving (more rpm)with flex, but another chassis platform, rmx, d5, yd2, rdx, etc a gear box is separate between front and rear so they can be go with more flex plate style
สั่งจาก Rc Mart กี่วันครับ / หล่อจัด..
ผมสั่ง asiatees ส่งแบบ dhl มาครับ ห้าวันได้ของ แต่โดนภาษีนิดหน่อย ไม่ถึงห้าร้อย ^^ ถ้าสนใจ จะให้สั่งให้ก็ได้นะครับผม / ถ้าสั่ง rcmart ก็มีทั้งแบบธรรมดาและ ems ครับ แต่ส่งแบบems จะช้ากว่าพวก fedex และ dhl ประมาณอาทิตย์นึงครับ และโดนค่าภาษีเหมือนกันครับ
@@RaceInPeaceisHere สั่งกับพี่อยู่ที่เท่าไหร่ครับ ขอช่องทางติดต่อด้วยครับ เผื่อผมสนใจ^^
New Kittikk คุยกันในเพจfb ได้ครับ ชื่อเพจ RaceInPeace ครับผม
Thats where i got my mst rmx 2.0 Silvia super coppermix
This is the BEST video I ever seen for rc build very nice 👍
Hello, thanks for watching this VDO lml/
Wow the lighting and film quality of this video is amazing. Good job man.
Hi, thanks for dropping here sir :D
I havr the mst rmx 2.0 rwd rtr drift silvia .. Amazing quality and tuned very well from the factory .. Mst is great on the factory setups ....
Hi, im mst user too, my car is rmx 2.0 s in this cover VDOruclips.net/video/HG_uiPeDzJs/видео.html but convert motor to the rear 2 years ago :D
i just ordered this kit cant wait till it comes...faily new to the hobby tho...started on 4wd now im read RWD
Oh man, let's try RWD may be you will be found something ;)
Just got mine in, I'm a little scared to start building it but I am excited.
Hi, I have building playlist and my latest VDO is FXX in modification :3
@@RaceInPeaceisHere awesome can't wait !!
No need to wait!! Just see them in playlist haha
@@RaceInPeaceisHere Thanks ! Hey do you suggest a decent but also cost effective servo I could pick up?
Go with digital servo, Sanwa, ReveD, Yokomo or Futaba servo and brushless servo is great but this VDO run with coreless servo and you can check all spec in description ruclips.net/video/z4didhCIY8M/видео.html
I wish MST made a touring car chassis with this layout, front motor RWD with a open diff or 4WD via a transferase. I'm big on front motor r/c cars since it's more scale and realistic to it's 1:1 clone.
TCR 1/10 from MST is good too and I like the calipers and brake discs in MST cars kits, very stimulate :D
Really really nice 👍🏻 made me want to rebuild my FXX
Sweet sound man lml/
The montage is insane keep going dude nice job !
Hi, thanks for watching and cheering, stay safe too man lml/
ngl after seeing this, i give credit to who ever builds the chassis's then sells them. i now want a fxx chassis instead of my currrent rmx 2.0
Thanks for wafching
I am so late to comment on this, but it is so satisfying how well you build this! Do you recommend??
Thanks for watching and this is a test run VDO ruclips.net/video/geYmaY8zjE8/видео.htmlsi=Y9NQ3gAQH37ltsZq
9:19 there are wrong ball connector position on the knuckle) It must be downside< not upperside)
Nice video!
Sorry for an everythings and thank you so much ^^
Your videos are so stylish. Always a joy to watch with a coffee in hand. Thanks!! =)
Ohh, very nice sound, thanks for watching and stay safe in this situation of our planet too lml/
@@RaceInPeaceisHere I have noticed for some parts you lubricate them before screwing them in, like ball ends. Is this to install and maybe remove them for a different setup later easier?
Yes and for saving the life time for using with that item
@@RaceInPeaceisHere great tip, thank you! I wish I had known this before assembling my MST CMX tie rods. My hand still hurts a week later.. 😂😂😂
Any partivular oil you prefer using or whichever shock or diff oil the kit comes with works?
@@YoShImUrA53 that is ball bearing oil and the great tool that can help you spin it is 3Racing, comes with all sakura d4/5 kit, you can see them in my d5 assemble vdo but im not sure about the factory will split them for sell or if you have friend who running with sakura, borrow him haha
Hi i'm and my San Filip we are your dane😁. We a amatorek rc. We have buty a first rc drift car
Hello, nice to see you too man lml/
มะก่อน มีอยู่ลำนึง เสียเฟืองดังมากๆๆ ดังเหมือนจะพัง แต่ไม่พัง เล่นอยู่พักนึง ทนกระแสทัวริ่งไม่ไหว จาก mat กลายเป็น asso ซะงัน
สวัสดีคับ ผมชอบดูรถทัวริ่งเล่นนะคับ แต่พอจะทำใจอยากมีทัวริ่งเล่นวิ่งไวๆบ้างก็รู้สึกหลอน สามโค้งแล้วแหกนี่เห็นมาเยอะแล้ว ขอมองอย่างเดียวก่อนดีกว่าคับ 555
สวยงามมากๆเลยครับบบบ😊🖒🖒
ขอบคุณที่เข้ามาดูนะครับ สักคันมั้ยครับ แฮรรร่!!!
@@RaceInPeaceisHere ถ้ามีผู้ใหญ่ใจดี ก็ดีนะครับ แฮ่รรร่!!!
โหวว ยังดีไม่ไหวครับ คันละห้าพันก่า ผู้ใหญ่ยังไม่มีเล่นเลย 5555555
@@RaceInPeaceisHere 5555+ต้องทำใจไปก่อนครับ😁
nice build,cool video
need one ?! haha, thanks for watching this VDO too brother :D
@@RaceInPeaceisHere 👍😃😎
ว้าววววสวยยงามมม สงสียไม่นาา 1/10
5555 จะมาก็บอกพี่ หาราคาพร้อมส่งให้
ถ่ายโคตรสวยเลยค้าบบบ
ขอบคุณที่เข้ามาดูและขอบคุณสำหรับกะลังใจด้วยแค้บบ
Thanks that means alot
okay :D
Is there a screw in side the center drive shaft that holds the pin in?
Hi, what minute of VDO? :D
La la la like that!!!! Love U5555
ohhhhhh, thx u so much shu !!!
We need more videos
hello, this playlist is all about MST FXX 2.0 S >>>> ruclips.net/p/PLZWJ3qBrRGpQ8mEyxXmk9Wq9bMrqmXu9T
👍
with love from BKK man lml/
Having difficulty time with pinion gear and gear A meshing. My pinion gear is 23t and using the 28t for the gear A. Can't even spin when I use my finger. Help!
hello !, try to slalom practice like this Vdo first ruclips.net/video/geYmaY8zjE8/видео.html and then you must to find another motor turn, in this clip Im using 13.5T but I think 17.5 or 21.5 will be give you more torque at first to middle trigger rate, wish you have fun with this chassis I will buy one for me too, this one is not mine :D
Thank you so much. I actually own a MST RMX 2.0. I love it! I upgraded just the esc and motor to 10.5t. I using a futaba 3pv. And this MST FXX, 13.5 t. With the link you sent me above I read his description. I understand now with the 48 pitch 😁. Aloha 🤙from Hawaii.
@@MrFatpig47 which one do you like better? Rmx or fxx? Can you describe the driving differences? What surface are you usually on with them? Thank you in advance
I have a question. I am getting mst fxxd ifs and i don't know what cheap good brushless motor and esc should I get
Hi, ifs is older version with this one but good for trying too, check all electronic stuff @ rcMart.com
Bartender.....give me a shot of coffee with my glass of whiskey please.
Hahaha, this guy is bartender and assembler in the same time, I am just a shooter :D
@@RaceInPeaceisHereI got a good laugh out of that.
Fantastic video and editing!
Just got back into rc, what shells can fit these chassis?
Hi, welcome back to hobby time haha, this chassis need 190-210 mm width bodyshell but you must to adjust the fitment with your wheel offset again ^^
How did you get the driveshaft mount onto the drive shaft?
im trying to figure out now
smh how did u do it
@@basquiattv2458 I couldn't figure it out. So, I didn't use it. As far as I can tell it doesn't affect the performance of the chassis or any gyro much. But, it would've been nice to use everything in the kit for looks.
Did you have issues withe rear diff during assembly?
I'm assembling mine now. And the rear end feels like it grinds really bad. So I stopped there
Nothing, you can checking in test run VDO, more info is in VDO description
or see my way to assemble with this VDO, they are the same ball-diff inside ruclips.net/video/z4didhCIY8M/видео.html
@@RaceInPeaceisHere thank you for the link. I went back and tore it down and put it back. Now it's spinning much smoother. Great vids btw👍👍👍
Okay, super sweet sound lml/
@@RaceInPeaceisHere thank you for your help. I'll send vid when it's done
I can not decide which one to buy. Out of the RMX, RRX, and FXX, what would you recommend? Or would you suggest another kit?
Love the video, truly great work.
Hi, try to check in uploaded playlist, I have full building of FMX chassis too, RMX 2.0 S or RMX 2.0 RTR are good for start, RRX is advancing in chassis setting if you need to go with more speed while running, FXX is my favorite, this one is harder to setting more than another but full style of real car movement when you run.
What you decide on?
decide on what?
@@randaddy2000 I got the FXX, options parts were hard to come by, but it is all complete now. Fitted a metallic red Toyota Aristo body to it as well.
Sound sweet :DDD
Is this the same thing as the fxx 2.0s front motor rwd shaft driven drift car kit w/ jz3 body
Yes
Got the same kit.
Sweet :3
Hey mate, could you please tell me what is the liquid you applied to some of the ball screws and what is the bearings bath liquid? Thank you.
For washing bearings is white benzine and for the screw is ball bearing lubricant oil
ดูก่อน เดี๋ยว เม้นตาม
กี๊ดดด ขอบคุณคับพี่
bro why is price for one peace
Is this chassis better than RMX 2.0?
I think this is not better or bad more than RMX but both chassis have different drifting style, momentum of FXX front motor more closer to the real car while drifting and RMX / RRX / D5 /YD-2 / Galm 2 got styling of RC car, weight balance move to the rear for compensation of traction and you can check FMX in my playlist too, FMX super fast for transition because weight balance is in the middle
@@RaceInPeaceisHere I will check. I'm not very satisfied with my RMX 2.0. Thank you!
I am RMX 2.0 S player 4 years ago if you have any question, drop here
Nice video, I see a tool used to build the struts , some kinda pump of sorts ..Where can I get one?
Hello :D you can check it out at rcMart.com or your RC local store sir, thanks for watching too lml/
What is it called? I can't find it.
www.rcmart.com/ride-air-remover-pump-set-29001-00101555
Does the kit come with everything including shock oil and everything like that?
Plastic shock are include but everything like that is !? :D
dark cutting mat for dark parts nice to watch :|
Hi, thanks for watching this VDO, have a nice day :D
do you get motor and servo?
ruclips.net/p/PLZWJ3qBrRGpQ8mEyxXmk9Wq9bMrqmXu9T
What's the difference between the rmx 2.0s rrx 2.0s and fxx 2.0s?
RMX = motor stay in front tower shock
RRX = rear motor and FXX = front motor position with shaft driven, FMX = middle motor position with shaft driven, you can check FMX assemble and test run VDO in my playlist ^^
Ngl I’ve attempted to do mines but it’s so complicated
relax, this is hobby so do not put them too high :D
@@RaceInPeaceisHere thanks bro. I realized I wasn’t going to get done in an hour , but 10😂😂
For me is over 10 hahaha, I have one in the box too but not assemble mine yet, this vdo is my friend kits :3 if you check in my mst fxx 2.0 s playlist you will see all of the process in electronic or fixing some for make her running too
How long did it take you to build
Take 10 hours for shooting this VDO
Does this kit come with a Gyro?
No
สอบถามน่อยครับ เดียวนี้บอดี้ Yokomo หาซื้อได้จากร้านไหนครับ
Worapot Manusvarnich อยากได้รุ่นไหนอะครับผม ผมลองหาให้ได้ครับ คุยต่อกันในfbได้นะครับ เพจ RaceInPeace ครับ
ได้ครับ
Mute it and it's not bad
Hi, mute what?
How much do you pay for it
Hi, if you mean the kit so this is the price www.rcmart.com/mst-fxx-2.0-s-front-motor-1-10-rwd-drift-car-kit-532183-00087453
its amazing how so much work could be put into making a video and yet have the video be so useless and for anyone wanting to learn more about the front motor rwd setup knowledge is very limited included never actually showing the chassis with a motor installed, so i still don't know exactly how it works, if you are looking to learn stuff this video isn't the place....
Hi, thanks for watching and I have the test run VDO with setting under VDO description too ^^
and this is full of building except how to painting the body shell ^^ ruclips.net/p/PLZWJ3qBrRGpQ8mEyxXmk9Wq9bMrqmXu9T
Can someone put me in the the right direction I need a servo esc Remote. gyro can someone help me
Hi, how much of budget that you need to spend for?
@@RaceInPeaceisHere it doesn't really matter not to crazy
@@RaceInPeaceisHere I'm on discord if that's a better way to communicate
i like the chassis idea, but this chassis has bad flex.
Movement like a real car but not good for performance ^^
yea i really want to like it but definitely performance not the best. MST RMX still one of the best chassis from MST. @@RaceInPeaceisHere
@bhdproduction2007 RMX is good for play or battle but FXX, FMX have great characteristic while driving like a real drift car so, one day may be you get what I try to said :D
@@RaceInPeaceisHere i understand what you're saying. I drift irl and AC. I have fanatec and simucube.
All I'm saying is the plastic on fxx for the chassis is not great. It flexes too much. You can make any RC drift move and have visual suspension realism like a real car. You just need to change the springs and add no shock oil. But thanks man for the video. Keep making more vids.
@bhdproduction2007 I mean the main shaft, why fxx plate have less flex because if much flex, all of plastic gear attaching near motor will destroyed while motor moving (more rpm)with flex, but another chassis platform, rmx, d5, yd2, rdx, etc a gear box is separate between front and rear so they can be go with more flex plate style