Baggio Baggio no it should be plug n play no code or reset required. Check your fuses for the horn or if you got the clock spring used the horn harness inside might be bad. But I’ll try with fuses first. Hope that helps!
Hello. I’ve replaced the clock spring with new one Checked all connections they are ok. But the paddle shifters behind the steering are not working !!! Any suggestion ??
Al-Tawazun Transports make sure clock spring is fir the right model. If you bought a new one but it doesn’t support the paddle shifter then the shifters will not work.
SS Performance hello. I replaced the clock spring again with one have the same old part number. (The original one) Everything work fine except the paddle shifter. Is it possible that a fuse is burned ? What could be the issue ? Pls help. Thanks.
What is the tool called to remove the steering air bag out of the way? The tool that goes inside the small hole at the rear bottom of the steering wheel?
I just got a brand new clock spring installed for a 2012 550xi. The indicator doesn't flip back in position when the steering is turned opposite direction, and also has a warning on dash. Does this need codes reset?
Hello. I have changed the clock spring myself with new one carries the same part number. But the shift paddle is not working. Do you have any idea what could be the issue. ?? Pls assist bmw 530 2012 f10 Thanks.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![How to replace the Clockspring on a BMW E90 E92 E91 E93 [2023] - Airbag Error 93B4 Fix!](/img/1.gif)
Does the new clock spring require programming?
Nice and clear explanation bro. Keep up the hard work and thanks you were very helpful
So helpful and you made it easy 👌🏾
thanks for that. makes it so much easier to do after watching the video. i have a F06 640 2013 model. same system
Great video!! Thank you.
Hi did you needed to code in the new clock spring in to the ECU my horn doesn't work some times on my BMW F30 2013 nice video well explained
Baggio Baggio no it should be plug n play no code or reset required. Check your fuses for the horn or if you got the clock spring used the horn harness inside might be bad. But I’ll try with fuses first. Hope that helps!
Big help thanks. Great video.
Hello.
I’ve replaced the clock spring with new one
Checked all connections they are ok.
But the paddle shifters behind the steering are not working !!!
Any suggestion ??
Al-Tawazun Transports make sure clock spring is fir the right model. If you bought a new one but it doesn’t support the paddle shifter then the shifters will not work.
@@ssperformance5316 I think I bough the wrong one as you said,
SS Performance hello.
I replaced the clock spring again with one have the same old part number. (The original one)
Everything work fine except the paddle shifter.
Is it possible that a fuse is burned ?
What could be the issue ?
Pls help.
Thanks.
Hi I replaced 528 but the air bag light and chassis stabilized light and indicator not stop after car strait
Very very helpful thank you
What is the tool called to remove the steering air bag out of the way? The tool that goes inside the small hole at the rear bottom of the steering wheel?
Flat head screwdriver 😅
I just got a brand new clock spring installed for a 2012 550xi. The indicator doesn't flip back in position when the steering is turned opposite direction, and also has a warning on dash. Does this need codes reset?
Your steering angle sensor needs to be reset via ista
I have a 2014 528i .. do you know where I could purchase one other than the dealer?
Fcp euro or Ecs tuning
hey what's the part number for this clock spring?
How much was the clock spring and where did you buy it from ? I have the 550i f10 2011.
5 Series clock springs run around $150 to $280 American Dollars. Depends on who you are buying from.
Thanks man. The place we got our 320i from said $870 plus tax before labor from bmw 😂 thieves.
Hello did everything as showed, but my airbag light still appears.. please help!
You need a scanner to clear it
Hello.
I have changed the clock spring myself with new one carries the same part number.
But the shift paddle is not working.
Do you have any idea what could be the issue. ??
Pls assist
bmw 530 2012 f10
Thanks.
Hello help pls , where is the airbag sensor here?
Helpful video but refitting detail be ideal