What to check first when your's car truck SUV air conditioning system stops suddenly blowing cold air. In many cases it is failed Magnetic Clutch Relay.
As soon as I tried to remove the solenoid, the clutch kicked in. It seems that the contacts to the solenoid were dirty, so I didn't even have to replace the solenoid-just remove and replace it. A great tip, thanks again. Cost for the fix-zero!
Exactly my problem, thanks 👍 As soon as I walked out of AutoZone I opened my hood to install it and dropped the relay inside. Had to walk back inside with my head down to buy another one
thank you sir for this informative video im glad to find this video , i have the same problem also to my car suddenly not working .. thank you sir . i will try this to my car..
Thank you sir for the information it's very helpful and i love your accent. I'm having a problem with my ac i changed relay, the blower motor and the resistor and it's not blowing enough air at all. Any ideas on what else it can possibly be?
Great video, thank you, I have a 2008 Honda Ridgeline and when I turn on the Heater on the left side blows cold and on the right vents blows hot. Would you have any idea what the problem would be please? Thanks God bless.
When I checked my clutch it’s spinning fine , should I still go buy a relay replacement then ? Or is my problem something else on my 2006 Honda Ridgeline with 200k miles
I just had my Ridgline Cleaned. When I brought it home and turned on the A/C first to clicks of dial, nothing then you continue to turn and it works until the last click and it goes back to low. When you turn it back to the left It will not turn off.. and Ideas?
I have to slap my glovebox to get the blower motor to run! been doing that for about a month now. finally got tired of it and will be replacing it myself after buying a $40 blower off amazon.
Turned the thermostat all the way to highest tempsetting. Let run for about a minute. Then turned it down to the lowest temp setting and voi’la it started to work correctly. Very Weird!
As soon as I tried to remove the solenoid, the clutch kicked in. It seems that the contacts to the solenoid were dirty, so I didn't even have to replace the solenoid-just remove and replace it. A great tip, thanks again. Cost for the fix-zero!
This just happend on my 2008 RL and I'm glad I found this for a quick fix!
Thank you for the information. That was exactly the issue I was dealing with on my 2006 Honda Ridgeline.
Very clean truck. I have 2006 Ridgeline as well but with lots of scratches and dents.
Thank you for this video, I had the exact same problem on a 2007 Honda Ridgeline. Your video allowed me to get the AC fixed right away. Thank you!
Exactly my problem, thanks 👍 As soon as I walked out of AutoZone I opened my hood to install it and dropped the relay inside. Had to walk back inside with my head down to buy another one
Oh my gosh! Thanks for this video, what a time and money saver.
Thanks you I replaced my relay and it works great I’m glad you included the fact that it cycles I thought maybe I got a bad relay
This worked on my 2006 Honda Ridgeline as well thanks for the video! 🙏
This worked for me today on my 2007 Ridgeline, appointment at dealer -cancelled! Thank you for your video.
Great information very clearly presented. Thank you!
Good explanation good video excellent resource.
Great video. Thank you so much
Thank you for always explaining everything clearly and thoroughly. Thank you also for sharing your knowledge.
Thank you. Saved me time and $$$$ for sure.
Thanks. This solution worked for me!
thank you sir for this informative video im glad to find this video , i have the same problem also to my car suddenly not working .. thank you sir . i will try this to my car..
Thank you so much
Thank you so much for the video my car now is very cold and you save me a lot of money
Worked perfectly on my 2007 Honda ridgeline! Meinicke wanted $169 diagnostic fee… Nope! Thanks much!!
Great Video
Very helpful. I knew the Ridgeline A/C had these relays but which one and where is the problem. Thanks!
I swapped one of my other relays to test before buying the relay. Best $9 bucks I’ve ever spent. This had to save me at least 300 bucks. If not more.
Thank you sir for the information it's very helpful and i love your accent. I'm having a problem with my ac i changed relay, the blower motor and the resistor and it's not blowing enough air at all. Any ideas on what else it can possibly be?
Great video, thank you, I have a 2008 Honda Ridgeline and when I turn on the Heater on the left side blows cold and on the right vents blows hot. Would you have any idea what the problem would be please? Thanks God bless.
Problem solved! 05/21/22
Thanks!
Just realized this is another of your channels , in from Toyota maintenance Channel
fortis619 Glad im not the only one haha. Im used to seeing him from Toyota Maintenance 🤣 I didnt realize he had two channels
I would love that if you could troubleshoot the rear trailer hitch plug in box the connection points thank you
👍👍
When I checked my clutch it’s spinning fine , should I still go buy a relay replacement then ? Or is my problem something else on my 2006 Honda Ridgeline with 200k miles
Thanks I'm have the same issue with my 11 Ridgeline. Going to try a new fuse
How'd it go?
this was the problem in our 06 Honda Accord!
I just had my Ridgline Cleaned. When I brought it home and turned on the A/C first to clicks of dial, nothing then you continue to turn and it works until the last click and it goes back to low. When you turn it back to the left It will not turn off.. and Ideas?
I have to slap my glovebox to get the blower motor to run! been doing that for about a month now. finally got tired of it and will be replacing it myself after buying a $40 blower off amazon.
I love you.
Part number? Thx
the one for my 06 Accord is sold under "import direct" 25-0395 39794-sda-a03
My clutch is cycling / spinning when I turn on the AC. So if it's spinning then it's probably not the relay????
Turned the thermostat all the way to highest tempsetting. Let run for about a minute. Then turned it down to the lowest temp setting and voi’la it started to work correctly. Very Weird!
Thanks Steve! That worked for me
Wow! This worked for me too