Great vid. What a pain just to change spark plugs! I just bought a 2017 LS and am planning to do a SP change. Question...do the Chevy Spark's take regular size spark plugs like any other vehicle? The kind that you can buy at any auto accessory/parts shop? Thanks in advance for your reply.
Three important mistakes: mistake 1. you don't use a torque wrench. Mistake 2. You don't check - you adjust the gap between the electrodes. Mistake 3. We don't put the spark plugs in the holes, we place them with the Special nut. Also omissions: you don't lubricate thread and terminals... these from me, after thirty years of good work. be well George engineer from Corinth Greece.
Hello, I washed my car engine since then I find it hard to move my car when moving with first gear. When I step on the gas it finds it difficult to open unless I steps on it continuously about four time. The engine will shake before the fire raises. Please help me out.
I was just saying the same damn thing well damn you have to undo all that before you even start the damn job hell I’ll forget what goes where 🤷♂️😭🤦♂️
Do you mean only in the idle state? Have you disconnected any of ECM, PCM, fuse or battery? Then you should configurate the idle control valve. 1. Turn ignition to "ON" for 5 seconds. 2. Turn ignition to "OFF" for 10 seconds. 3. Turn ignition to "ON" for 5 seconds. 4. Start Engine in "Park" or "Neutral". 5. Keep engine idling till coolant temperature is above 85°C. 6. If available, turn air condition on for 10 seconds. 7. If available, turn air condition off for 10 seconds. 8. If car has automatic gearbox, applay the handbrake. Step on brake pedal and shift into D (Drive). 9. If available, turn air condition on for 10 seconds. 10. If available, turn air condition off for 10 seconds. 11. Turn off the ignition. Configuration finished. Hope I could help you.
Big mistake!!!: tightening without a torque wrench, tightening only 1 time - the spark plug must be tightened 3 times with an interval of 1 minute to 20 Nm!!!
This is ridiculous, making it much harder than needed. Watch others for faster quicker methods without taking all these parts off. Such as "Chevy Spark Spark plugs and ignition coil replacement".
Man, I'll be doing this soon, such a big job just to get to some spark plugs... Mental , thanks for the video, real helpful.
Yeah it's a big job for an idiot dunce cap
Thank you very much for your vid omg what a long process but will have a go now many thanks
I, am from Indonesia, thanks
I remember doing that twice in my wife's same car and not disconnected coolant hoses.
Do you have to gap the new spark plugs
Thanks. Stopped half way. Put back together. That was time usually takes so entire job. 5-8 mins. This is an hour due to skate location.
Hello i have a question about the silver pipe how do you get that click back in place i'm try to get it in but it wont get in can you help me?
Good morning! I have a chevy spark model 2014 model...i want to check &replace the fuel filter... can pls. show a videos on how to do it. Salamat po
You find how to replace the fuel filter ?
@@Qwerty03044 not yet sir
@@benigno17 I think it's on the left rear of the vehicle. You have to follow the fuel circuit
Soory man to ask what is that pipe the silver oner that goes at the back of the intake and what it for
Great vid. What a pain just to change spark plugs! I just bought a 2017 LS and am planning to do a SP change. Question...do the Chevy Spark's take regular size spark plugs like any other vehicle? The kind that you can buy at any auto accessory/parts shop? Thanks in advance for your reply.
Great content, thanks very much but what spark plugs do I need to buy? Thanks
Thank you for watching. Not remember now what spark plugs i used. Better if you go any car parts shop and ask them. 👍👌
Before putting the new plugs inside, can i know what do you do off camera? It seems like you ate doing something to them, but can't see what
Nothing 🙂. I done this job same time. Jus to some one call me, that’s why I stop recording. 🙂👌
Three important mistakes: mistake 1. you don't use a torque wrench. Mistake 2. You don't check - you adjust the gap between the electrodes. Mistake 3. We don't put the spark plugs in the holes, we place them with the Special nut. Also omissions: you don't lubricate thread and terminals... these from me, after thirty years of good work. be well George engineer from Corinth Greece.
Hello, I washed my car engine since then I find it hard to move my car when moving with first gear. When I step on the gas it finds it difficult to open unless I steps on it continuously about four time. The engine will shake before the fire raises. Please help me out.
Why is all this work required to change the plugs on such a simple car? WTH?
I was just saying the same damn thing well damn you have to undo all that before you even start the damn job hell I’ll forget what goes where 🤷♂️😭🤦♂️
I remember doing it on an older car and it was so easy. But THIS?!
@@missveiled7095 Same here!
😂😅😂😅😂
My car started rpm fluctuation after changing the spark plugs. Can you help what's the problem?
Do you mean only in the idle state? Have you disconnected any of ECM, PCM, fuse or battery? Then you should configurate the idle control valve.
1. Turn ignition to "ON" for 5 seconds.
2. Turn ignition to "OFF" for 10 seconds.
3. Turn ignition to "ON" for 5 seconds.
4. Start Engine in "Park" or "Neutral".
5. Keep engine idling till coolant temperature is above 85°C.
6. If available, turn air condition on for 10 seconds.
7. If available, turn air condition off for 10 seconds.
8. If car has automatic gearbox, applay the handbrake. Step on brake pedal and shift into D (Drive).
9. If available, turn air condition on for 10 seconds.
10. If available, turn air condition off for 10 seconds.
11. Turn off the ignition. Configuration finished.
Hope I could help you.
شكرااااا ❤
sir what is the size of socket you use for sparkplug in chev
spark?
16 mm spark plug socket
Hi sir, i need some help to open engine oil carter, do you have the tutorial?
dont have any information about this work. sorry. i just change clutch and make service on this car.
Merci !
How on earth do you replace the egr pipe retaining clip? Impossible!
Did it go faster lol, , I know I picked up about 5hp when I run it with the anti slip off ,
i cant find de lambda sensor can someone help me/?
gdzie jest odma olejowa
New Spark plug gap?
I am glad I did not attempt this.My last car you simply pulled the leads off and removed the plugs.
Big mistake!!!: tightening without a torque wrench, tightening only 1 time - the spark plug must be tightened 3 times with an interval of 1 minute to 20 Nm!!!
This is ridiculous, making it much harder than needed. Watch others for faster quicker methods without taking all these parts off. Such as "Chevy Spark Spark plugs and ignition coil replacement".
bescheuert, halbe auto ausbauen um zündkerzen auszutauschen!
It’s still easier than some other cars. Look at how this is done in a Mercedes A-Class or Nissan Qashqai 2.0 🙂
the worst mistake you made is dropping the new sparkplugs in..... YOU never do that you can mess up the gap on the sparkplug
Mine did not require that much work. He’s just doing extra stuff no need for all that
Thank you because I was thinking I’ll just spend the money for the car shop to do it don’t have the patience or time 😏✌️